public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Dan Carpenter <dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: monis-VPRAkNaXOzVS1MOuV/RT9w@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: re: IB/mlx4: Build the port IBoE GID table properly under bonding
Date: Mon, 17 Feb 2014 14:52:35 +0300	[thread overview]
Message-ID: <20140217115235.GA27933@elgon.mountain> (raw)

Hello Moni Shoua,

This is a semi-automatic email about new static checker warnings.

The patch ad4885d279b6: "IB/mlx4: Build the port IBoE GID table
properly under bonding" from Feb 5, 2014, leads to the following
Smatch complaint:

drivers/infiniband/hw/mlx4/main.c:1749 mlx4_ib_scan_netdevs()
	 error: we previously assumed 'curr_netdev' could be null (see line 1722)

drivers/infiniband/hw/mlx4/main.c
  1721	
  1722			if (curr_netdev) {
                            ^^^^^^^^^^^
Check.

  1723				port_state = (netif_running(curr_netdev) && netif_carrier_ok(curr_netdev)) ?
  1724							IB_PORT_ACTIVE : IB_PORT_DOWN;
  1725				mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
  1726			} else {
  1727				reset_gid_table(ibdev, port);
  1728			}
  1729			/* if using bonding/team and a slave port is down, we don't the bond IP
  1730			 * based gids in the table since flows that select port by gid may get
  1731			 * the down port.
  1732			 */
  1733			if (curr_master && (port_state == IB_PORT_DOWN)) {
  1734				reset_gid_table(ibdev, port);
  1735				mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
  1736			}
  1737			/* if bonding is used it is possible that we add it to masters
  1738			 * only after IP address is assigned to the net bonding
  1739			 * interface.
  1740			*/
  1741			if (curr_master && (old_master != curr_master)) {
  1742				reset_gid_table(ibdev, port);
  1743				mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
  1744				mlx4_ib_get_dev_addr(curr_master, ibdev, port);
  1745			}
  1746	
  1747			if (!curr_master && (old_master != curr_master)) {
  1748				reset_gid_table(ibdev, port);
  1749				mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
                                                               ^^^^^^^^^^^
Dereferenced without checking.

  1750				mlx4_ib_get_dev_addr(curr_netdev, ibdev, port);
  1751			}

regards,
dan carpenter
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2014-02-17 11:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-17 11:52 Dan Carpenter [this message]
     [not found] ` <20140217115235.GA27933-mgFCXtclrQlZLf2FXnZxJA@public.gmane.org>
2014-02-18 14:13   ` IB/mlx4: Build the port IBoE GID table properly under bonding Moni Shoua
     [not found]     ` <53036A88.5030306-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2014-02-18 14:28       ` Dan Carpenter
2014-02-18 14:32         ` Moni Shoua
     [not found]           ` <53036F15.1080601-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2014-03-12 10:17             ` Bart Van Assche
     [not found]               ` <53203433.5060603-HInyCGIudOg@public.gmane.org>
2014-03-12 17:49                 ` Moni Shoua

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140217115235.GA27933@elgon.mountain \
    --to=dan.carpenter-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=monis-VPRAkNaXOzVS1MOuV/RT9w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox