From: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Christoph Raisch <raisch-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org>,
Hoang-Nam Nguyen
<hnguyen-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org>,
Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Subject: [PATCH v2 2/4] IB/ipath: remove ib_sg_dma_address() and ib_sg_dma_len() overloads
Date: Fri, 28 Mar 2014 13:26:47 -0400 [thread overview]
Message-ID: <20140328172647.23646.58499.stgit@phlsvslse11.ph.intel.com> (raw)
In-Reply-To: <20140328172606.23646.35980.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
The lack of these methods is compensated for by code changes
to .map_sg to insure that the vanilla sg_dma_address() and
sg_dma_len() will do the same thing as the equivalent
former ib_sg_dma_address() and ib_sg_dma_len() calls
into the drivers.
Suggested-by: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Cc: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/ipath/ipath_dma.c | 43 +++++++++++--------------------
1 file changed, 15 insertions(+), 28 deletions(-)
diff --git a/drivers/infiniband/hw/ipath/ipath_dma.c b/drivers/infiniband/hw/ipath/ipath_dma.c
index 644c2c7..123a8c0 100644
--- a/drivers/infiniband/hw/ipath/ipath_dma.c
+++ b/drivers/infiniband/hw/ipath/ipath_dma.c
@@ -115,6 +115,10 @@ static int ipath_map_sg(struct ib_device *dev, struct scatterlist *sgl,
ret = 0;
break;
}
+ sg->dma_address = addr + sg->offset;
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
+ sg->dma_length = sg->length;
+#endif
}
return ret;
}
@@ -126,21 +130,6 @@ static void ipath_unmap_sg(struct ib_device *dev,
BUG_ON(!valid_dma_direction(direction));
}
-static u64 ipath_sg_dma_address(struct ib_device *dev, struct scatterlist *sg)
-{
- u64 addr = (u64) page_address(sg_page(sg));
-
- if (addr)
- addr += sg->offset;
- return addr;
-}
-
-static unsigned int ipath_sg_dma_len(struct ib_device *dev,
- struct scatterlist *sg)
-{
- return sg->length;
-}
-
static void ipath_sync_single_for_cpu(struct ib_device *dev,
u64 addr,
size_t size,
@@ -176,17 +165,15 @@ static void ipath_dma_free_coherent(struct ib_device *dev, size_t size,
}
struct ib_dma_mapping_ops ipath_dma_mapping_ops = {
- ipath_mapping_error,
- ipath_dma_map_single,
- ipath_dma_unmap_single,
- ipath_dma_map_page,
- ipath_dma_unmap_page,
- ipath_map_sg,
- ipath_unmap_sg,
- ipath_sg_dma_address,
- ipath_sg_dma_len,
- ipath_sync_single_for_cpu,
- ipath_sync_single_for_device,
- ipath_dma_alloc_coherent,
- ipath_dma_free_coherent
+ .mapping_error = ipath_mapping_error,
+ .map_single = ipath_dma_map_single,
+ .unmap_single = ipath_dma_unmap_single,
+ .map_page = ipath_dma_map_page,
+ .unmap_page = ipath_dma_unmap_page,
+ .map_sg = ipath_map_sg,
+ .unmap_sg = ipath_unmap_sg,
+ .sync_single_for_cpu = ipath_sync_single_for_cpu,
+ .sync_single_for_device = ipath_sync_single_for_device,
+ .alloc_coherent = ipath_dma_alloc_coherent,
+ .free_coherent = ipath_dma_free_coherent
};
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-03-28 17:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-28 17:26 [PATCH v2 0/4] Series short description Mike Marciniszyn
[not found] ` <20140328172606.23646.35980.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
2014-03-28 17:26 ` [PATCH v2 1/4] IB/qib: remove ib_sg_dma_address() and ib_sg_dma_len() overloads Mike Marciniszyn
2014-03-28 17:26 ` Mike Marciniszyn [this message]
[not found] ` <20140328172647.23646.58499.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
2014-03-28 18:09 ` [PATCH v2 2/4] IB/ipath: " Yann Droneaud
[not found] ` <1396030191.3297.81.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-03-28 19:07 ` Marciniszyn, Mike
2014-03-28 17:26 ` [PATCH v2 3/4] IB/ehca: " Mike Marciniszyn
2014-03-28 17:26 ` [PATCH v2 4/4] IB/core: Remove overload in ib_sg_dma* Mike Marciniszyn
2014-03-28 18:10 ` [PATCH v2 0/4] Series short description Yann Droneaud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140328172647.23646.58499.stgit@phlsvslse11.ph.intel.com \
--to=mike.marciniszyn-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=bvanassche-HInyCGIudOg@public.gmane.org \
--cc=hnguyen-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=raisch-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox