From: Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 1/1] IPoIB: Improve parent interface p_key handling.
Date: Mon, 09 Jun 2014 17:55:07 -0400 [thread overview]
Message-ID: <20140609215507.24166.94407.stgit@phlsvlogin03.ph.intel.com> (raw)
With reference to commit c2904141696ee19551f1553944446f23cdd5d95e.
It was noticed that parent interface keeps sending broadcast group
join requests if p_key index 0 is invalid. That creates unnecessary
noise on a fabric:
ib0: multicast join failed for ff12:401b:8000:0000:0000:0000:ffff:ffff,
status -22
Proposed patch re-init resources, then brings interface
up only if p_key idx 0 is valid either on bootup or on PKEY_CHANGE event.
Original code could run multicast task regardless of p_key value,
which we want to avoid.
Modified event handler will utilize following strategy:
if interface is not initialized and event is not PKEY_CHANGE related - return.
call update_parent_pkey() -> if pkey hasn't changed - return.
if interface is initialized
flush it -> call ipoib_ib_dev_stop() - de-initialized.
Then start multicast task only if ipoib_ib_dev_open() has succeeded, reinitialized,
i.e. p_key is valid.
Changes from v1:
p_key check for 'Invalid' value was moved to
ipoib_pkey_dev_check_presence() that is used now in ipoib_ib_dev_open()
for p_key validation.
Whitespace and format adjusted.
Reviewed-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 31 +++++++++++++++++--------------
1 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 6a7003d..627f74f 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -52,6 +52,7 @@ MODULE_PARM_DESC(data_debug_level,
#endif
static DEFINE_MUTEX(pkey_mutex);
+static void ipoib_pkey_dev_check_presence(struct net_device *dev);
struct ipoib_ah *ipoib_create_ah(struct net_device *dev,
struct ib_pd *pd, struct ib_ah_attr *attr)
@@ -669,12 +670,13 @@ int ipoib_ib_dev_open(struct net_device *dev)
struct ipoib_dev_priv *priv = netdev_priv(dev);
int ret;
- if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &priv->pkey_index)) {
- ipoib_warn(priv, "P_Key 0x%04x not found\n", priv->pkey);
- clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
+ ipoib_pkey_dev_check_presence(dev);
+
+ if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) {
+ ipoib_warn(priv, "P_Key 0x%04x is %s\n", priv->pkey,
+ !(priv->pkey & 0x7fff) ? "Invalid" : "not found");
return -1;
}
- set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
ret = ipoib_init_qp(dev);
if (ret) {
@@ -712,9 +714,10 @@ dev_stop:
static void ipoib_pkey_dev_check_presence(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
- u16 pkey_index = 0;
- if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &pkey_index))
+ if (!(priv->pkey & 0x7fff) ||
+ ib_find_pkey(priv->ca, priv->port, priv->pkey,
+ &priv->pkey_index))
clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
else
set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
@@ -987,12 +990,10 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
up_read(&priv->vlan_rwsem);
if (!test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) {
- /* for non-child devices must check/update the pkey value here */
- if (level == IPOIB_FLUSH_HEAVY &&
- !test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags))
- update_parent_pkey(priv);
- ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n");
- return;
+ if (level < IPOIB_FLUSH_HEAVY) {
+ ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n");
+ return;
+ }
}
if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) {
@@ -1038,8 +1039,10 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
ipoib_ib_dev_down(dev, 0);
if (level == IPOIB_FLUSH_HEAVY) {
- ipoib_ib_dev_stop(dev, 0);
- ipoib_ib_dev_open(dev);
+ if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+ ipoib_ib_dev_stop(dev, 0);
+ if (ipoib_ib_dev_open(dev) != 0)
+ return;
}
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-06-09 21:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-09 21:55 Alex Estrin [this message]
[not found] ` <20140609215507.24166.94407.stgit-u2TXY/5TJkdZ7WVY1cDZ9q2pdiUAq4bhAL8bYrjMMd8@public.gmane.org>
2014-06-10 5:49 ` [PATCH v2 1/1] IPoIB: Improve parent interface p_key handling Erez Shitrit
[not found] ` <53969C57.3090907-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-06-10 13:39 ` Estrin, Alex
[not found] ` <F3529576D8E232409F431C309E293993B706EF-8k97q/ur5Z1cIJlls4ac1rfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-06-10 14:56 ` Erez Shitrit
[not found] ` <53971C8D.2080103-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2014-06-10 17:07 ` Estrin, Alex
2014-06-10 6:16 ` Or Gerlitz
[not found] ` <5396A2CC.3070000-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2014-06-10 11:32 ` Estrin, Alex
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140609215507.24166.94407.stgit@phlsvlogin03.ph.intel.com \
--to=alex.estrin-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox