[PATCH 10/41] IB/hfi1: add eeprom hooks

[Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>]

Signed-off-by: Andrew Friedley <andrew.friedley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Arthur Kepner <arthur.kepner-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Brendan Cunningham <brendan.cunningham-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Brian Welty <brian.welty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Caz Yokoyama <caz.yokoyama-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dean Luick <dean.luick-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Easwar Hariharan <easwar.hariharan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Harish Chegondi <harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jim Snow <jim.m.snow-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: John Gregor <john.a.gregor-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jubin John <jubin.john-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Kaike Wan <kaike.wan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Kevin Pine <kevin.pine-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Kyle Liddell <kyle.liddell-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mitko Haralanov <mitko.haralanov-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Ravi Krishnaswamy <ravi.krishnaswamy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sadanand Warrier <sadanand.warrier-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sanath Kumar <sanath.s.kumar-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sudeep Dutt <sudeep.dutt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Vlad Danushevsky <vladimir.danusevsky-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/infiniband/hw/hfi1/eprom.c |  475 ++++++++++++++++++++++++++++++++++++
 drivers/infiniband/hw/hfi1/eprom.h |   55 ++++
 2 files changed, 530 insertions(+)
 create mode 100644 drivers/infiniband/hw/hfi1/eprom.c
 create mode 100644 drivers/infiniband/hw/hfi1/eprom.h

diff --git a/drivers/infiniband/hw/hfi1/eprom.c b/drivers/infiniband/hw/hfi1/eprom.c
new file mode 100644
index 0000000..b61d3ae
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/eprom.c
@@ -0,0 +1,475 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include <linux/delay.h>
+#include "hfi.h"
+#include "common.h"
+#include "eprom.h"
+
+/*
+ * The EPROM is logically divided into two partitions:
+ *	partition 0: the first 128K, visible from PCI ROM BAR
+ *	partition 1: the rest
+ */
+#define P0_SIZE (128 * 1024)
+#define P1_START P0_SIZE
+
+/* largest erase size supported by the controller */
+#define SIZE_32KB (32 * 1024)
+#define MASK_32KB (SIZE_32KB - 1)
+
+/* controller page size, in bytes */
+#define EP_PAGE_SIZE 256
+#define EEP_PAGE_MASK (EP_PAGE_SIZE - 1)
+
+/* controller commands */
+#define CMD_SHIFT 24
+#define CMD_NOP			    (0)
+#define CMD_PAGE_PROGRAM(addr)	    ((0x02 << CMD_SHIFT) | addr)
+#define CMD_READ_DATA(addr)	    ((0x03 << CMD_SHIFT) | addr)
+#define CMD_READ_SR1		    ((0x05 << CMD_SHIFT))
+#define CMD_WRITE_ENABLE	    ((0x06 << CMD_SHIFT))
+#define CMD_SECTOR_ERASE_32KB(addr) ((0x52 << CMD_SHIFT) | addr)
+#define CMD_CHIP_ERASE		    ((0x60 << CMD_SHIFT))
+#define CMD_READ_MANUF_DEV_ID	    ((0x90 << CMD_SHIFT))
+#define CMD_RELEASE_POWERDOWN_NOID  ((0xab << CMD_SHIFT))
+
+/* controller interface speeds */
+#define EP_SPEED_FULL 0x2	/* full speed */
+
+/* controller status register 1 bits */
+#define SR1_BUSY 0x1ull		/* the BUSY bit in SR1 */
+
+/* sleep length while waiting for controller */
+#define WAIT_SLEEP_US 100	/* must be larger than 5 (see usage) */
+#define COUNT_DELAY_SEC(n) ((n) * (1000000/WAIT_SLEEP_US))
+
+/* GPIO pins */
+#define EPROM_WP_N (1ull << 14)	/* EPROM write line */
+
+/*
+ * Use the EP mutex to guard against other callers from within the driver.
+ * Also covers usage of eprom_available.
+ */
+static DEFINE_MUTEX(eprom_mutex);
+static int eprom_available;	/* default: not available */
+
+/*
+ * Turn on external enable line that allows writing on the flash.
+ */
+static void write_enable(struct hfi1_devdata *dd)
+{
+	/* raise signal */
+	write_csr(dd, ASIC_GPIO_OUT,
+		read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N);
+	/* raise enable */
+	write_csr(dd, ASIC_GPIO_OE,
+		read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N);
+}
+
+/*
+ * Turn off external enable line that allows writing on the flash.
+ */
+static void write_disable(struct hfi1_devdata *dd)
+{
+	/* lower signal */
+	write_csr(dd, ASIC_GPIO_OUT,
+		read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N);
+	/* lower enable */
+	write_csr(dd, ASIC_GPIO_OE,
+		read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N);
+}
+
+/*
+ * Wait for the device to become not busy.  Must be called after all
+ * write or erase operations.
+ */
+static int wait_for_not_busy(struct hfi1_devdata *dd)
+{
+	unsigned long count = 0;
+	u64 reg;
+	int ret = 0;
+
+	/* starts page mode */
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_SR1);
+	while (1) {
+		udelay(WAIT_SLEEP_US);
+		usleep_range(WAIT_SLEEP_US - 5, WAIT_SLEEP_US + 5);
+		count++;
+		reg = read_csr(dd, ASIC_EEP_DATA);
+		if ((reg & SR1_BUSY) == 0)
+			break;
+		/* 200s is the largest time for a 128Mb device */
+		if (count > COUNT_DELAY_SEC(200)) {
+			dd_dev_err(dd, "waited too long for SPI FLASH busy to clear - failing\n");
+			ret = -ETIMEDOUT;
+			break; /* break, not goto - must stop page mode */
+		}
+	}
+
+	/* stop page mode with a NOP */
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP);
+
+	return ret;
+}
+
+/*
+ * Read the device ID from the SPI controller.
+ */
+static u32 read_device_id(struct hfi1_devdata *dd)
+{
+	/* read the Manufacture Device ID */
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_MANUF_DEV_ID);
+	return (u32)read_csr(dd, ASIC_EEP_DATA);
+}
+
+/*
+ * Erase the whole flash.
+ */
+static int erase_chip(struct hfi1_devdata *dd)
+{
+	int ret;
+
+	write_enable(dd);
+
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_CHIP_ERASE);
+	ret = wait_for_not_busy(dd);
+
+	write_disable(dd);
+
+	return ret;
+}
+
+/*
+ * Erase a range using the 32KB erase command.
+ */
+static int erase_32kb_range(struct hfi1_devdata *dd, u32 start, u32 end)
+{
+	int ret = 0;
+
+	if (end < start)
+		return -EINVAL;
+
+	if ((start & MASK_32KB) || (end & MASK_32KB)) {
+		dd_dev_err(dd,
+			"%s: non-aligned range (0x%x,0x%x) for a 32KB erase\n",
+			__func__, start, end);
+		return -EINVAL;
+	}
+
+	write_enable(dd);
+
+	for (; start < end; start += SIZE_32KB) {
+		write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
+		write_csr(dd, ASIC_EEP_ADDR_CMD,
+						CMD_SECTOR_ERASE_32KB(start));
+		ret = wait_for_not_busy(dd);
+		if (ret)
+			goto done;
+	}
+
+done:
+	write_disable(dd);
+
+	return ret;
+}
+
+/*
+ * Read a 256 byte (64 dword) EPROM page.
+ * All callers have verified the offset is at a page boundary.
+ */
+static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result)
+{
+	int i;
+
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset));
+	for (i = 0; i < EP_PAGE_SIZE/sizeof(u32); i++)
+		result[i] = (u32)read_csr(dd, ASIC_EEP_DATA);
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */
+}
+
+/*
+ * Read length bytes starting at offset.  Copy to user address addr.
+ */
+static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
+{
+	u32 offset;
+	u32 buffer[EP_PAGE_SIZE/sizeof(u32)];
+	int ret = 0;
+
+	/* reject anything not on an EPROM page boundary */
+	if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK))
+		return -EINVAL;
+
+	for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
+		read_page(dd, start + offset, buffer);
+		if (copy_to_user((void __user *)(addr + offset),
+						buffer, EP_PAGE_SIZE)) {
+			ret = -EFAULT;
+			goto done;
+		}
+	}
+
+done:
+	return ret;
+}
+
+/*
+ * Write a 256 byte (64 dword) EPROM page.
+ * All callers have verified the offset is at a page boundary.
+ */
+static int write_page(struct hfi1_devdata *dd, u32 offset, u32 *data)
+{
+	int i;
+
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
+	write_csr(dd, ASIC_EEP_DATA, data[0]);
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_PAGE_PROGRAM(offset));
+	for (i = 1; i < EP_PAGE_SIZE/sizeof(u32); i++)
+		write_csr(dd, ASIC_EEP_DATA, data[i]);
+	/* will close the open page */
+	return wait_for_not_busy(dd);
+}
+
+/*
+ * Write length bytes starting at offset.  Read from user address addr.
+ */
+static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
+{
+	u32 offset;
+	u32 buffer[EP_PAGE_SIZE/sizeof(u32)];
+	int ret = 0;
+
+	/* reject anything not on an EPROM page boundary */
+	if ((start & EEP_PAGE_MASK) || (len & EEP_PAGE_MASK))
+		return -EINVAL;
+
+	write_enable(dd);
+
+	for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
+		if (copy_from_user(buffer, (void __user *)(addr + offset),
+						EP_PAGE_SIZE)) {
+			ret = -EFAULT;
+			goto done;
+		}
+		ret = write_page(dd, start + offset, buffer);
+		if (ret)
+			goto done;
+	}
+
+done:
+	write_disable(dd);
+	return ret;
+}
+
+/*
+ * Perform the given operation on the EPROM.  Called from user space.  The
+ * user credentials have already been checked.
+ *
+ * Return 0 on success, -ERRNO on error
+ */
+int handle_eprom_command(const struct hfi1_cmd *cmd)
+{
+	struct hfi1_devdata *dd;
+	u32 dev_id;
+	int ret = 0;
+
+	/*
+	 * The EPROM is per-device, so use unit 0 as that will always
+	 * exist.
+	 */
+	dd = hfi1_lookup(0);
+	if (!dd) {
+		pr_err("%s: cannot find unit 0!\n", __func__);
+		return -EINVAL;
+	}
+
+	/* lock against other callers touching the ASIC block */
+	mutex_lock(&eprom_mutex);
+
+	/* some platforms do not have an EPROM */
+	if (!eprom_available) {
+		ret = -ENOSYS;
+		goto done_asic;
+	}
+
+	/* lock against the other HFI on another OS */
+	ret = acquire_hw_mutex(dd);
+	if (ret) {
+		dd_dev_err(dd,
+			"%s: unable to acquire hw mutex, no EPROM support\n",
+			__func__);
+		goto done_asic;
+	}
+
+	dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n",
+		__func__, cmd->type, cmd->len, cmd->addr);
+
+	switch (cmd->type) {
+	case HFI1_CMD_EP_INFO:
+		if (cmd->len != sizeof(u32)) {
+			ret = -ERANGE;
+			break;
+		}
+		dev_id = read_device_id(dd);
+		/* addr points to a u32 user buffer */
+		if (copy_to_user((void __user *)cmd->addr, &dev_id,
+								sizeof(u32)))
+			ret = -EFAULT;
+		break;
+	case HFI1_CMD_EP_ERASE_CHIP:
+		ret = erase_chip(dd);
+		break;
+	case HFI1_CMD_EP_ERASE_P0:
+		if (cmd->len != P0_SIZE) {
+			ret = -ERANGE;
+			break;
+		}
+		ret = erase_32kb_range(dd, 0, cmd->len);
+		break;
+	case HFI1_CMD_EP_ERASE_P1:
+		/* check for overflow */
+		if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) {
+			ret = -ERANGE;
+			break;
+		}
+		ret = erase_32kb_range(dd, P1_START, P1_START + cmd->len);
+		break;
+	case HFI1_CMD_EP_READ_P0:
+		if (cmd->len != P0_SIZE) {
+			ret = -ERANGE;
+			break;
+		}
+		ret = read_length(dd, 0, cmd->len, cmd->addr);
+		break;
+	case HFI1_CMD_EP_READ_P1:
+		/* check for overflow */
+		if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) {
+			ret = -ERANGE;
+			break;
+		}
+		ret = read_length(dd, P1_START, cmd->len, cmd->addr);
+		break;
+	case HFI1_CMD_EP_WRITE_P0:
+		if (cmd->len > P0_SIZE) {
+			ret = -ERANGE;
+			break;
+		}
+		ret = write_length(dd, 0, cmd->len, cmd->addr);
+		break;
+	case HFI1_CMD_EP_WRITE_P1:
+		/* check for overflow */
+		if (P1_START + cmd->len > ASIC_EEP_ADDR_CMD_EP_ADDR_MASK) {
+			ret = -ERANGE;
+			break;
+		}
+		ret = write_length(dd, P1_START, cmd->len, cmd->addr);
+		break;
+	default:
+		dd_dev_err(dd, "%s: unexpected command %d\n",
+			__func__, cmd->type);
+		ret = -EINVAL;
+		break;
+	}
+
+	release_hw_mutex(dd);
+done_asic:
+	mutex_unlock(&eprom_mutex);
+	return ret;
+}
+
+/*
+ * Initialize the EPROM handler.
+ */
+int eprom_init(struct hfi1_devdata *dd)
+{
+	int ret = 0;
+
+	/* only the discrete chip has an EPROM, nothing to do */
+	if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0)
+		return 0;
+
+	/* lock against other callers */
+	mutex_lock(&eprom_mutex);
+	if (eprom_available)	/* already initialized */
+		goto done_asic;
+
+	/*
+	 * Lock against the other HFI on another OS - the mutex above
+	 * would have caught anything in this driver.  It is OK if
+	 * both OSes reset the EPROM - as long as they don't do it at
+	 * the same time.
+	 */
+	ret = acquire_hw_mutex(dd);
+	if (ret) {
+		dd_dev_err(dd,
+			"%s: unable to acquire hw mutex, no EPROM support\n",
+			__func__);
+		goto done_asic;
+	}
+
+	/* reset EPROM to be sure it is in a good state */
+
+	/* set reset */
+	write_csr(dd, ASIC_EEP_CTL_STAT,
+					ASIC_EEP_CTL_STAT_EP_RESET_SMASK);
+	/* clear reset, set speed */
+	write_csr(dd, ASIC_EEP_CTL_STAT,
+			EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT);
+
+	/* wake the device with command "release powerdown NoID" */
+	write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID);
+
+	eprom_available = 1;
+	release_hw_mutex(dd);
+done_asic:
+	mutex_unlock(&eprom_mutex);
+	return ret;
+}
diff --git a/drivers/infiniband/hw/hfi1/eprom.h b/drivers/infiniband/hw/hfi1/eprom.h
new file mode 100644
index 0000000..64a6427
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/eprom.h
@@ -0,0 +1,55 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+struct hfi1_cmd;
+struct hfi1_devdata;
+
+int eprom_init(struct hfi1_devdata *dd);
+int handle_eprom_command(const struct hfi1_cmd *cmd);

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html