From: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3 25/49] IB/hfi1: add local mad header
Date: Wed, 17 Jun 2015 08:30:50 -0400 [thread overview]
Message-ID: <20150617123050.8744.66380.stgit@phlsvslse11.ph.intel.com> (raw)
In-Reply-To: <20150617122755.8744.44665.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
Signed-off-by: Andrew Friedley <andrew.friedley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Arthur Kepner <arthur.kepner-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Brendan Cunningham <brendan.cunningham-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Brian Welty <brian.welty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Caz Yokoyama <caz.yokoyama-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dean Luick <dean.luick-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Easwar Hariharan <easwar.hariharan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Harish Chegondi <harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jim Snow <jim.m.snow-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: John Gregor <john.a.gregor-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jubin John <jubin.john-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Kaike Wan <kaike.wan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Kevin Pine <kevin.pine-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Kyle Liddell <kyle.liddell-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mitko Haralanov <mitko.haralanov-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Ravi Krishnaswamy <ravi.krishnaswamy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sadanand Warrier <sadanand.warrier-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sanath Kumar <sanath.s.kumar-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sudeep Dutt <sudeep.dutt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Vlad Danushevsky <vladimir.danusevsky-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/mad.h | 285 ++++++++++++++++++++++++++++++++++++++
1 file changed, 285 insertions(+)
create mode 100644 drivers/infiniband/hw/hfi1/mad.h
diff --git a/drivers/infiniband/hw/hfi1/mad.h b/drivers/infiniband/hw/hfi1/mad.h
new file mode 100644
index 0000000..220be48
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/mad.h
@@ -0,0 +1,285 @@
+/*
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _HFI1_MAD_H
+#define _HFI1_MAD_H
+
+#include <rdma/ib_pma.h>
+#define USE_PI_LED_ENABLE 1 /* use led enabled bit in struct
+ * opa_port_states, if available */
+#include <rdma/opa_smi.h>
+#include <rdma/opa_port_info.h>
+#ifndef PI_LED_ENABLE_SUP
+#define PI_LED_ENABLE_SUP 0
+#endif
+#include "opa_compat.h"
+
+#define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004)
+#define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008)
+#define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C)
+#define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C)
+
+#define OPA_MAX_PREEMPT_CAP 32
+#define OPA_VLARB_LOW_ELEMENTS 0
+#define OPA_VLARB_HIGH_ELEMENTS 1
+#define OPA_VLARB_PREEMPT_ELEMENTS 2
+#define OPA_VLARB_PREEMPT_MATRIX 3
+
+#define HFI1_XMIT_RATE_UNSUPPORTED 0x0
+#define HFI1_XMIT_RATE_PICO 0x7
+/* number of 4nsec cycles equaling 2secs */
+#define HFI1_CONG_TIMER_PSINTERVAL 0x1DCD64EC
+
+#define IB_CC_SVCTYPE_RC 0x0
+#define IB_CC_SVCTYPE_UC 0x1
+#define IB_CC_SVCTYPE_RD 0x2
+#define IB_CC_SVCTYPE_UD 0x3
+
+
+/*
+ * There should be an equivalent IB #define for the following, but
+ * I cannot find it.
+ */
+#define OPA_CC_LOG_TYPE_HFI 2
+
+struct opa_hfi1_cong_log_event_internal {
+ u32 lqpn;
+ u32 rqpn;
+ u8 sl;
+ u8 svc_type;
+ u32 rlid;
+ s64 timestamp; /* wider than 32 bits to detect 32 bit rollover */
+};
+
+struct opa_hfi1_cong_log_event {
+ u8 local_qp_cn_entry[3];
+ u8 remote_qp_number_cn_entry[3];
+ u8 sl_svc_type_cn_entry; /* 5 bits SL, 3 bits svc type */
+ u8 reserved;
+ __be32 remote_lid_cn_entry;
+ __be32 timestamp_cn_entry;
+} __packed;
+
+#define OPA_CONG_LOG_ELEMS 96
+
+struct opa_hfi1_cong_log {
+ u8 log_type;
+ u8 congestion_flags;
+ __be16 threshold_event_counter;
+ __be32 current_time_stamp;
+ u8 threshold_cong_event_map[OPA_MAX_SLS/8];
+ struct opa_hfi1_cong_log_event events[OPA_CONG_LOG_ELEMS];
+} __packed;
+
+#define IB_CC_TABLE_CAP_DEFAULT 31
+
+/* Port control flags */
+#define IB_CC_CCS_PC_SL_BASED 0x01
+
+struct opa_congestion_setting_entry {
+ u8 ccti_increase;
+ u8 reserved;
+ __be16 ccti_timer;
+ u8 trigger_threshold;
+ u8 ccti_min; /* min CCTI for cc table */
+} __packed;
+
+struct opa_congestion_setting_entry_shadow {
+ u8 ccti_increase;
+ u8 reserved;
+ u16 ccti_timer;
+ u8 trigger_threshold;
+ u8 ccti_min; /* min CCTI for cc table */
+} __packed;
+
+struct opa_congestion_setting_attr {
+ __be32 control_map;
+ __be16 port_control;
+ struct opa_congestion_setting_entry entries[OPA_MAX_SLS];
+} __packed;
+
+struct opa_congestion_setting_attr_shadow {
+ u32 control_map;
+ u16 port_control;
+ struct opa_congestion_setting_entry_shadow entries[OPA_MAX_SLS];
+} __packed;
+
+#define IB_CC_TABLE_ENTRY_INCREASE_DEFAULT 1
+#define IB_CC_TABLE_ENTRY_TIMER_DEFAULT 1
+
+/* 64 Congestion Control table entries in a single MAD */
+#define IB_CCT_ENTRIES 64
+#define IB_CCT_MIN_ENTRIES (IB_CCT_ENTRIES * 2)
+
+struct ib_cc_table_entry {
+ __be16 entry; /* shift:2, multiplier:14 */
+};
+
+struct ib_cc_table_entry_shadow {
+ u16 entry; /* shift:2, multiplier:14 */
+};
+
+struct ib_cc_table_attr {
+ __be16 ccti_limit; /* max CCTI for cc table */
+ struct ib_cc_table_entry ccti_entries[IB_CCT_ENTRIES];
+} __packed;
+
+struct ib_cc_table_attr_shadow {
+ u16 ccti_limit; /* max CCTI for cc table */
+ struct ib_cc_table_entry_shadow ccti_entries[IB_CCT_ENTRIES];
+} __packed;
+
+#define CC_TABLE_SHADOW_MAX \
+ (IB_CC_TABLE_CAP_DEFAULT * IB_CCT_ENTRIES)
+
+struct cc_table_shadow {
+ u16 ccti_limit; /* max CCTI for cc table */
+ struct ib_cc_table_entry_shadow entries[CC_TABLE_SHADOW_MAX];
+} __packed;
+
+/*
+ * struct cc_state combines the (active) per-port congestion control
+ * table, and the (active) per-SL congestion settings. cc_state data
+ * may need to be read in code paths that we want to be fast, so it
+ * is an RCU protected structure.
+ */
+struct cc_state {
+ struct rcu_head rcu;
+ struct cc_table_shadow cct;
+ struct opa_congestion_setting_attr_shadow cong_setting;
+};
+
+/*
+ * OPA BufferControl MAD
+ */
+
+/* attribute modifier macros */
+#define OPA_AM_NPORT_SHIFT 24
+#define OPA_AM_NPORT_MASK 0xff
+#define OPA_AM_NPORT_SMASK (OPA_AM_NPORT_MASK << OPA_AM_NPORT_SHIFT)
+#define OPA_AM_NPORT(am) (((am) >> OPA_AM_NPORT_SHIFT) & \
+ OPA_AM_NPORT_MASK)
+
+#define OPA_AM_NBLK_SHIFT 24
+#define OPA_AM_NBLK_MASK 0xff
+#define OPA_AM_NBLK_SMASK (OPA_AM_NBLK_MASK << OPA_AM_NBLK_SHIFT)
+#define OPA_AM_NBLK(am) (((am) >> OPA_AM_NBLK_SHIFT) & \
+ OPA_AM_NBLK_MASK)
+
+#define OPA_AM_START_BLK_SHIFT 0
+#define OPA_AM_START_BLK_MASK 0xff
+#define OPA_AM_START_BLK_SMASK (OPA_AM_START_BLK_MASK << \
+ OPA_AM_START_BLK_SHIFT)
+#define OPA_AM_START_BLK(am) (((am) >> OPA_AM_START_BLK_SHIFT) & \
+ OPA_AM_START_BLK_MASK)
+
+#define OPA_AM_PORTNUM_SHIFT 0
+#define OPA_AM_PORTNUM_MASK 0xff
+#define OPA_AM_PORTNUM_SMASK (OPA_AM_PORTNUM_MASK << OPA_AM_PORTNUM_SHIFT)
+#define OPA_AM_PORTNUM(am) (((am) >> OPA_AM_PORTNUM_SHIFT) & \
+ OPA_AM_PORTNUM_MASK)
+
+#define OPA_AM_ASYNC_SHIFT 12
+#define OPA_AM_ASYNC_MASK 0x1
+#define OPA_AM_ASYNC_SMASK (OPA_AM_ASYNC_MASK << OPA_AM_ASYNC_SHIFT)
+#define OPA_AM_ASYNC(am) (((am) >> OPA_AM_ASYNC_SHIFT) & \
+ OPA_AM_ASYNC_MASK)
+
+#define OPA_AM_START_SM_CFG_SHIFT 9
+#define OPA_AM_START_SM_CFG_MASK 0x1
+#define OPA_AM_START_SM_CFG_SMASK (OPA_AM_START_SM_CFG_MASK << \
+ OPA_AM_START_SM_CFG_SHIFT)
+#define OPA_AM_START_SM_CFG(am) (((am) >> OPA_AM_START_SM_CFG_SHIFT) \
+ & OPA_AM_START_SM_CFG_MASK)
+
+#define OPA_AM_CI_ADDR_SHIFT 19
+#define OPA_AM_CI_ADDR_MASK 0xfff
+#define OPA_AM_CI_ADDR_SMASK (OPA_AM_CI_ADDR_MASK << OPA_CI_ADDR_SHIFT)
+#define OPA_AM_CI_ADDR(am) (((am) >> OPA_AM_CI_ADDR_SHIFT) & \
+ OPA_AM_CI_ADDR_MASK)
+
+#define OPA_AM_CI_LEN_SHIFT 13
+#define OPA_AM_CI_LEN_MASK 0x3f
+#define OPA_AM_CI_LEN_SMASK (OPA_AM_CI_LEN_MASK << OPA_CI_LEN_SHIFT)
+#define OPA_AM_CI_LEN(am) (((am) >> OPA_AM_CI_LEN_SHIFT) & \
+ OPA_AM_CI_LEN_MASK)
+
+/* error info macros */
+#define OPA_EI_STATUS_SMASK 0x80
+#define OPA_EI_CODE_SMASK 0x0f
+
+struct vl_limit {
+ __be16 dedicated;
+ __be16 shared;
+};
+
+struct buffer_control {
+ __be16 reserved;
+ __be16 overall_shared_limit;
+ struct vl_limit vl[OPA_MAX_VLS];
+};
+
+struct sc2vlnt {
+ u8 vlnt[32]; /* 5 bit VL, 3 bits reserved */
+};
+
+/*
+ * The PortSamplesControl.CounterMasks field is an array of 3 bit fields
+ * which specify the N'th counter's capabilities. See ch. 16.1.3.2.
+ * We support 5 counters which only count the mandatory quantities.
+ */
+#define COUNTER_MASK(q, n) (q << ((9 - n) * 3))
+#define COUNTER_MASK0_9 \
+ cpu_to_be32(COUNTER_MASK(1, 0) | \
+ COUNTER_MASK(1, 1) | \
+ COUNTER_MASK(1, 2) | \
+ COUNTER_MASK(1, 3) | \
+ COUNTER_MASK(1, 4))
+
+#endif /* _HFI1_MAD_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-17 12:30 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 12:28 [PATCH v3 00/49] Add OPA gen1 driver Mike Marciniszyn
[not found] ` <20150617122755.8744.44665.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
2015-06-17 12:28 ` [PATCH v3 01/49] IB/core: Add header definitions Mike Marciniszyn
[not found] ` <20150617122840.8744.38451.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org>
2015-06-17 14:12 ` Hal Rosenstock
[not found] ` <55818059.90701-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-07-30 20:49 ` Marciniszyn, Mike
2015-08-31 15:40 ` ira.weiny
2015-06-17 12:28 ` [PATCH v3 02/49] IB/hfi1: add chip specific support part1 Mike Marciniszyn
2015-06-17 12:28 ` [PATCH v3 03/49] IB/hfi1: add chip specific support part2 Mike Marciniszyn
2015-06-17 12:28 ` [PATCH v3 04/49] IB/hfi1: add chip specific support part3 Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 05/49] IB/hfi1: add chip specific support part4 Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 06/49] IB/hfi1: add chip register definitions Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 07/49] IB/hfi1: add chip specific headers Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 08/49] IB/hfi1: add common header file definitions Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 09/49] IB/hfi1: add completion queue processing Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 10/49] IB/hfi1: add debugfs handling Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 11/49] IB/hfi1: add char device instantiation code Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 12/49] IB/hfi1: add diagnostic hooks Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 13/49] IB/hfi1: add dma operation hooks Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 14/49] IB/hfi1: add low lower receive functions Mike Marciniszyn
2015-06-17 12:29 ` [PATCH v3 15/49] IB/hfi1: add eeprom hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 16/49] IB/hfi1: add PSM driver control/data path Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 17/49] IB/hfi1: add firmware hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 18/49] IB/hfi1: add general hfi header file Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 19/49] IB/hfi1: add module init hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 20/49] IB/hfi1: add interrupt hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 21/49] IB/hfi1: add progress delay/restart hooks Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 22/49] IB/hfi1: add rkey/lkey validation Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 23/49] IB/hfi1: add OPA mad handling part1 Mike Marciniszyn
2015-06-17 12:30 ` [PATCH v3 24/49] IB/hfi1: add OPA mad handling part2 Mike Marciniszyn
2015-06-17 12:30 ` Mike Marciniszyn [this message]
2015-06-17 12:30 ` [PATCH v3 26/49] IB/hfi1: add user/kernel memory sharing hooks Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 27/49] IB/hfi1: add memory region handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 28/49] IB/hfi1: add misc OPA defines Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 29/49] IB/hfi1: add pcie routines Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 30/49] IB/hfi1: add pio handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 31/49] IB/hfi1: add platform config definitions Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 32/49] IB/hfi1: add qp handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 33/49] IB/hfi1: add qsfp handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 34/49] IB/hfi1: add RC QP handling Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 35/49] IB/hfi1: add routines for RC/UC Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 36/49] IB/hfi1: add sdma routines Mike Marciniszyn
2015-06-17 12:31 ` [PATCH v3 37/49] IB/hfi1: add sdma header file Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 38/49] IB/hfi1: add SRQ handling Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 39/49] IB/hfi1: add sysfs routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 40/49] IB/hfi1: add tracepoint debug routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 41/49] IB/hfi1: add QSFP twsi routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 42/49] IB/hfi1: add UC QP handling Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 43/49] IB/hfi1: add UD " Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 44/49] IB/hfi1: add low level page locking Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 45/49] IB/hfi1: add PSM sdma hooks Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 46/49] IB/hfi1: add general verbs handling Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 47/49] IB/hfi1: add multicast routines Mike Marciniszyn
2015-06-17 12:32 ` [PATCH v3 48/49] IB/hfi1: add driver make/config files Mike Marciniszyn
2015-06-17 12:33 ` [PATCH v3 49/49] IB/core: Add opa driver to kbuild Mike Marciniszyn
2015-06-19 10:55 ` [PATCH v3 00/49] Add OPA gen1 driver Or Gerlitz
[not found] ` <CAJ3xEMiire8aFGr8FkcA_PEELAGpF7fxwWNwS3_L4wvK9s+Pkw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-16 19:36 ` Marciniszyn, Mike
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150617123050.8744.66380.stgit@phlsvslse11.ph.intel.com \
--to=mike.marciniszyn-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).