From: Steve Wise <swise@opengridcomputing.com>
To: dledford@redhat.com
Cc: infinipath@intel.com, sagig@mellanox.com, ogerlitz@mellanox.com,
roid@mellanox.com, linux-rdma@vger.kernel.org, eli@mellanox.com,
target-devel@vger.kernel.org
Subject: [PATCH V5 5/5] RDMA/isert: Limit read depth based on the device max_sge_rd capability
Date: Sun, 05 Jul 2015 12:45:06 -0500 [thread overview]
Message-ID: <20150705174505.10042.28442.stgit@build2.ogc.int> (raw)
In-Reply-To: <20150705174353.10042.39648.stgit@build2.ogc.int>
Use the device's max_sge_rd capability to compute the target's read sge
depth. Save both the read and write max_sge values in the isert_conn
struct, and use these when creating RDMA_WRITE/READ work requests.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
---
drivers/infiniband/ulp/isert/ib_isert.c | 31 +++++++++++++++++++++++--------
drivers/infiniband/ulp/isert/ib_isert.h | 3 ++-
2 files changed, 25 insertions(+), 9 deletions(-)
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index ee40478..35015c9 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -163,7 +163,9 @@ isert_create_qp(struct isert_conn *isert_conn,
* outgoing control PDU responses.
*/
attr.cap.max_send_sge = max(2, device->dev_attr.max_sge - 2);
- isert_conn->max_sge = attr.cap.max_send_sge;
+ isert_conn->max_write_sge = attr.cap.max_send_sge;
+ isert_conn->max_read_sge = min_t(u32, device->dev_attr.max_sge_rd,
+ attr.cap.max_send_sge);
attr.cap.max_recv_sge = 1;
attr.sq_sig_type = IB_SIGNAL_REQ_WR;
@@ -2395,7 +2397,7 @@ isert_put_text_rsp(struct iscsi_cmd *cmd, struct iscsi_conn *conn)
static int
isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
struct ib_sge *ib_sge, struct ib_send_wr *send_wr,
- u32 data_left, u32 offset)
+ u32 data_left, u32 offset, u32 max_sge)
{
struct iscsi_cmd *cmd = isert_cmd->iscsi_cmd;
struct scatterlist *sg_start, *tmp_sg;
@@ -2406,7 +2408,7 @@ isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
sg_off = offset / PAGE_SIZE;
sg_start = &cmd->se_cmd.t_data_sg[sg_off];
- sg_nents = min(cmd->se_cmd.t_data_nents - sg_off, isert_conn->max_sge);
+ sg_nents = min(cmd->se_cmd.t_data_nents - sg_off, max_sge);
page_off = offset % PAGE_SIZE;
send_wr->sg_list = ib_sge;
@@ -2450,8 +2452,9 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
struct isert_data_buf *data = &wr->data;
struct ib_send_wr *send_wr;
struct ib_sge *ib_sge;
- u32 offset, data_len, data_left, rdma_write_max, va_offset = 0;
+ u32 offset, data_len, data_left, rdma_max_len, va_offset = 0;
int ret = 0, i, ib_sge_cnt;
+ u32 max_sge;
isert_cmd->tx_desc.isert_cmd = isert_cmd;
@@ -2473,7 +2476,12 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
}
wr->ib_sge = ib_sge;
- wr->send_wr_num = DIV_ROUND_UP(data->nents, isert_conn->max_sge);
+ if (wr->iser_ib_op == ISER_IB_RDMA_WRITE)
+ max_sge = isert_conn->max_write_sge;
+ else
+ max_sge = isert_conn->max_read_sge;
+
+ wr->send_wr_num = DIV_ROUND_UP(data->nents, max_sge);
wr->send_wr = kzalloc(sizeof(struct ib_send_wr) * wr->send_wr_num,
GFP_KERNEL);
if (!wr->send_wr) {
@@ -2483,11 +2491,11 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
}
wr->isert_cmd = isert_cmd;
- rdma_write_max = isert_conn->max_sge * PAGE_SIZE;
+ rdma_max_len = max_sge * PAGE_SIZE;
for (i = 0; i < wr->send_wr_num; i++) {
send_wr = &isert_cmd->rdma_wr.send_wr[i];
- data_len = min(data_left, rdma_write_max);
+ data_len = min(data_left, rdma_max_len);
send_wr->send_flags = 0;
if (wr->iser_ib_op == ISER_IB_RDMA_WRITE) {
@@ -2509,7 +2517,7 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
}
ib_sge_cnt = isert_build_rdma_wr(isert_conn, isert_cmd, ib_sge,
- send_wr, data_len, offset);
+ send_wr, data_len, offset, max_sge);
ib_sge += ib_sge_cnt;
offset += data_len;
@@ -2638,6 +2646,13 @@ isert_fast_reg_mr(struct isert_conn *isert_conn,
fr_wr.wr.fast_reg.rkey = mr->rkey;
fr_wr.wr.fast_reg.access_flags = IB_ACCESS_LOCAL_WRITE;
+ /*
+ * IWARP transports need REMOTE_WRITE for MRs used as the target of
+ * an RDMA_READ.
+ */
+ if (rdma_protocol_iwarp(ib_dev, isert_conn->cm_id->port_num))
+ fr_wr.wr.fast_reg.access_flags |= IB_ACCESS_REMOTE_WRITE;
+
if (!wr)
wr = &fr_wr;
else
diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h
index 9ec23a7..29fde27 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.h
+++ b/drivers/infiniband/ulp/isert/ib_isert.h
@@ -152,7 +152,8 @@ struct isert_conn {
u32 responder_resources;
u32 initiator_depth;
bool pi_support;
- u32 max_sge;
+ u32 max_write_sge;
+ u32 max_read_sge;
char *login_buf;
char *login_req_buf;
char *login_rsp_buf;
next prev parent reply other threads:[~2015-07-05 17:45 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-05 17:44 [PATCH V5 0/5] iSER support for iWARP Steve Wise
2015-07-05 17:44 ` [PATCH V5 1/5] mlx4, mlx5, mthca: Expose max_sge_rd correctly Steve Wise
2015-07-05 17:44 ` [PATCH V5 2/5] ipath,qib: " Steve Wise
2015-07-05 17:44 ` [PATCH V5 3/5] RDMA/iser: Limit sg tablesize and max_sectors to device fastreg max depth Steve Wise
[not found] ` <20150705174452.10042.44695.stgit-PBeJgSbIpn97NCTnQtmixQ@public.gmane.org>
2015-07-06 7:50 ` Sagi Grimberg
[not found] ` <559A335A.90506-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-07-06 14:35 ` Steve Wise
2015-07-07 6:26 ` Sagi Grimberg
2015-07-07 13:59 ` Steve Wise
2015-07-07 14:32 ` Or Gerlitz
2015-07-07 15:41 ` Steve Wise
2015-07-07 16:30 ` Sagi Grimberg
2015-07-05 17:45 ` [PATCH V5 4/5] RDMA/isert: Set REMOTE_WRITE on DMA MRs to support iWARP devices Steve Wise
[not found] ` <20150705174459.10042.37298.stgit-PBeJgSbIpn97NCTnQtmixQ@public.gmane.org>
2015-07-06 7:52 ` Sagi Grimberg
2015-07-05 17:45 ` Steve Wise [this message]
[not found] ` <20150705174505.10042.28442.stgit-PBeJgSbIpn97NCTnQtmixQ@public.gmane.org>
2015-07-06 7:52 ` [PATCH V5 5/5] RDMA/isert: Limit read depth based on the device max_sge_rd capability Sagi Grimberg
2015-07-14 8:27 ` Christoph Hellwig
[not found] ` <20150714082721.GA30072-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2015-07-14 14:41 ` Steve Wise
2015-07-14 15:42 ` 'Christoph Hellwig'
[not found] ` <20150714154200.GE11026-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2015-07-14 15:49 ` Steve Wise
2015-07-14 18:47 ` Chuck Lever
2015-07-14 19:11 ` Steve Wise
2015-07-14 19:25 ` Chuck Lever
[not found] ` <20150705174353.10042.39648.stgit-PBeJgSbIpn97NCTnQtmixQ@public.gmane.org>
2015-07-07 0:38 ` [PATCH V5 0/5] iSER support for iWARP Nicholas A. Bellinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150705174505.10042.28442.stgit@build2.ogc.int \
--to=swise@opengridcomputing.com \
--cc=dledford@redhat.com \
--cc=eli@mellanox.com \
--cc=infinipath@intel.com \
--cc=linux-rdma@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=roid@mellanox.com \
--cc=sagig@mellanox.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox