From: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v4 08/16] xprtrdma: Account for RPC/RDMA header size when deciding to inline
Date: Mon, 03 Aug 2015 13:03:49 -0400 [thread overview]
Message-ID: <20150803170349.9115.26879.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20150803165807.9115.23842.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
When the size of the RPC message is near the inline threshold (1KB),
the client would allow messages to be sent that were a few bytes too
large.
When marshaling RPC/RDMA requests, ensure the combined size of
RPC/RDMA header and RPC header do not exceed the inline threshold.
Endpoints typically reject RPC/RDMA messages that exceed the size
of their receive buffers.
The two server implementations I test with (Linux and Solaris) use
receive buffers that are larger than the client’s inline threshold.
Thus so far this has been benign, observed only by code inspection.
Signed-off-by: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Devesh Sharma <devesh.sharma-1wcpHE2jlwO1Z/+hSey0Gg@public.gmane.org>
Tested-by: Devesh Sharma <devesh.sharma-1wcpHE2jlwO1Z/+hSey0Gg@public.gmane.org>
---
net/sunrpc/xprtrdma/rpc_rdma.c | 29 +++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index 8e9c564..950b654 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -71,6 +71,31 @@ static const char transfertypes[][12] = {
};
#endif
+/* The client can send a request inline as long as the RPCRDMA header
+ * plus the RPC call fit under the transport's inline limit. If the
+ * combined call message size exceeds that limit, the client must use
+ * the read chunk list for this operation.
+ */
+static bool rpcrdma_args_inline(struct rpc_rqst *rqst)
+{
+ unsigned int callsize = RPCRDMA_HDRLEN_MIN + rqst->rq_snd_buf.len;
+
+ return callsize <= RPCRDMA_INLINE_WRITE_THRESHOLD(rqst);
+}
+
+/* The client can't know how large the actual reply will be. Thus it
+ * plans for the largest possible reply for that particular ULP
+ * operation. If the maximum combined reply message size exceeds that
+ * limit, the client must provide a write list or a reply chunk for
+ * this request.
+ */
+static bool rpcrdma_results_inline(struct rpc_rqst *rqst)
+{
+ unsigned int repsize = RPCRDMA_HDRLEN_MIN + rqst->rq_rcv_buf.buflen;
+
+ return repsize <= RPCRDMA_INLINE_READ_THRESHOLD(rqst);
+}
+
/*
* Chunk assembly from upper layer xdr_buf.
*
@@ -409,7 +434,7 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
* a READ, then use write chunks to separate the file data
* into pages; otherwise use reply chunks.
*/
- if (rqst->rq_rcv_buf.buflen <= RPCRDMA_INLINE_READ_THRESHOLD(rqst))
+ if (rpcrdma_results_inline(rqst))
wtype = rpcrdma_noch;
else if (rqst->rq_rcv_buf.page_len == 0)
wtype = rpcrdma_replych;
@@ -432,7 +457,7 @@ rpcrdma_marshal_req(struct rpc_rqst *rqst)
* implies the op is a write.
* TBD check NFSv4 setacl
*/
- if (rqst->rq_snd_buf.len <= RPCRDMA_INLINE_WRITE_THRESHOLD(rqst))
+ if (rpcrdma_args_inline(rqst))
rtype = rpcrdma_noch;
else if (rqst->rq_snd_buf.page_len == 0)
rtype = rpcrdma_areadch;
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-08-03 17:03 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 17:02 [PATCH v4 00/16] NFS/RDMA client side for Linux 4.3 Chuck Lever
[not found] ` <20150803165807.9115.23842.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-08-03 17:02 ` [PATCH v4 01/16] xprtrdma: Make xprt_setup_rdma() agnostic to family of server address Chuck Lever
2015-08-03 17:02 ` [PATCH v4 02/16] xprtrdma: Raise maximum payload size to one megabyte Chuck Lever
2015-08-03 17:02 ` [PATCH v4 03/16] xprtrdma: Increase default credit limit Chuck Lever
2015-08-03 17:03 ` [PATCH v4 04/16] xprtrdma: Don't fall back to PHYSICAL memory registration Chuck Lever
2015-08-03 17:03 ` [PATCH v4 05/16] xprtrdma: Remove last ib_reg_phys_mr() call site Chuck Lever
2015-08-03 17:03 ` [PATCH v4 06/16] xprtrdma: Clean up rpcrdma_ia_open() Chuck Lever
2015-08-03 17:03 ` [PATCH v4 07/16] xprtrdma: Remove logic that constructs RDMA_MSGP type calls Chuck Lever
2015-08-03 17:03 ` Chuck Lever [this message]
2015-08-03 17:03 ` [PATCH v4 09/16] xprtrdma: Always provide a write list when sending NFS READ Chuck Lever
2015-08-03 17:04 ` [PATCH v4 10/16] xprtrdma: Don't provide a reply chunk when expecting a short reply Chuck Lever
2015-08-03 17:04 ` [PATCH v4 11/16] xprtrdma: Fix XDR tail buffer marshalling Chuck Lever
2015-08-03 17:04 ` [PATCH v4 12/16] xprtrdma: Fix large NFS SYMLINK calls Chuck Lever
2015-08-03 17:04 ` [PATCH v4 13/16] xprtrdma: Clean up xprt_rdma_print_stats() Chuck Lever
2015-08-03 17:04 ` [PATCH v4 14/16] xprtrdma: Count RDMA_NOMSG type calls Chuck Lever
2015-08-03 17:04 ` [PATCH v4 15/16] core: Remove the ib_reg_phys_mr() and ib_rereg_phys_mr() verbs Chuck Lever
2015-08-03 17:05 ` [PATCH v4 16/16] xprtrdma: take HCA driver refcount at client Chuck Lever
[not found] ` <20150803170504.9115.48166.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-08-03 17:07 ` Chuck Lever
2015-08-06 14:28 ` [PATCH v4 00/16] NFS/RDMA client side for Linux 4.3 Anna Schumaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150803170349.9115.26879.stgit@manet.1015granger.net \
--to=chuck.lever-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).