From: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: Anna.Schumaker-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v4 11/16] xprtrdma: Pre-allocate Work Requests for backchannel
Date: Sat, 24 Oct 2015 17:27:51 -0400 [thread overview]
Message-ID: <20151024212751.4715.63525.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20151024211707.4715.61650.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
Pre-allocate extra send and receive Work Requests needed to handle
backchannel receives and sends.
The transport doesn't know how many extra WRs to pre-allocate until
the xprt_setup_backchannel() call, but that's long after the WRs are
allocated during forechannel setup.
So, use a fixed value for now.
Signed-off-by: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Sagi Grimberg <sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Tested-By: Devesh Sharma <devesh.sharma-1wcpHE2jlwO1Z/+hSey0Gg@public.gmane.org>
---
net/sunrpc/xprtrdma/backchannel.c | 4 ++++
net/sunrpc/xprtrdma/verbs.c | 14 ++++++++++++--
net/sunrpc/xprtrdma/xprt_rdma.h | 10 ++++++++++
3 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/xprtrdma/backchannel.c b/net/sunrpc/xprtrdma/backchannel.c
index 3d01b32..3165ed6 100644
--- a/net/sunrpc/xprtrdma/backchannel.c
+++ b/net/sunrpc/xprtrdma/backchannel.c
@@ -125,6 +125,9 @@ int xprt_rdma_bc_setup(struct rpc_xprt *xprt, unsigned int reqs)
* Twice as many rpc_rqsts are prepared to ensure there is
* always an rpc_rqst available as soon as a reply is sent.
*/
+ if (reqs > RPCRDMA_BACKWARD_WRS >> 1)
+ goto out_err;
+
for (i = 0; i < (reqs << 1); i++) {
rqst = kzalloc(sizeof(*rqst), GFP_KERNEL);
if (!rqst) {
@@ -161,6 +164,7 @@ int xprt_rdma_bc_setup(struct rpc_xprt *xprt, unsigned int reqs)
out_free:
xprt_rdma_bc_destroy(xprt, reqs);
+out_err:
pr_err("RPC: %s: setup backchannel transport failed\n", __func__);
return -ENOMEM;
}
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 7f0ed30..93883ff 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -568,6 +568,7 @@ rpcrdma_ep_create(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia,
struct ib_device_attr *devattr = &ia->ri_devattr;
struct ib_cq *sendcq, *recvcq;
struct ib_cq_init_attr cq_attr = {};
+ unsigned int max_qp_wr;
int rc, err;
if (devattr->max_sge < RPCRDMA_MAX_IOVS) {
@@ -576,18 +577,27 @@ rpcrdma_ep_create(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia,
return -ENOMEM;
}
+ if (devattr->max_qp_wr <= RPCRDMA_BACKWARD_WRS) {
+ dprintk("RPC: %s: insufficient wqe's available\n",
+ __func__);
+ return -ENOMEM;
+ }
+ max_qp_wr = devattr->max_qp_wr - RPCRDMA_BACKWARD_WRS;
+
/* check provider's send/recv wr limits */
- if (cdata->max_requests > devattr->max_qp_wr)
- cdata->max_requests = devattr->max_qp_wr;
+ if (cdata->max_requests > max_qp_wr)
+ cdata->max_requests = max_qp_wr;
ep->rep_attr.event_handler = rpcrdma_qp_async_error_upcall;
ep->rep_attr.qp_context = ep;
ep->rep_attr.srq = NULL;
ep->rep_attr.cap.max_send_wr = cdata->max_requests;
+ ep->rep_attr.cap.max_send_wr += RPCRDMA_BACKWARD_WRS;
rc = ia->ri_ops->ro_open(ia, ep, cdata);
if (rc)
return rc;
ep->rep_attr.cap.max_recv_wr = cdata->max_requests;
+ ep->rep_attr.cap.max_recv_wr += RPCRDMA_BACKWARD_WRS;
ep->rep_attr.cap.max_send_sge = RPCRDMA_MAX_IOVS;
ep->rep_attr.cap.max_recv_sge = 1;
ep->rep_attr.cap.max_inline_data = 0;
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index 1eb86c79f..55d2660 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -101,6 +101,16 @@ struct rpcrdma_ep {
*/
#define RPCRDMA_IGNORE_COMPLETION (0ULL)
+/* Pre-allocate extra Work Requests for handling backward receives
+ * and sends. This is a fixed value because the Work Queues are
+ * allocated when the forward channel is set up.
+ */
+#if defined(CONFIG_SUNRPC_BACKCHANNEL)
+#define RPCRDMA_BACKWARD_WRS (8)
+#else
+#define RPCRDMA_BACKWARD_WRS (0)
+#endif
+
/* Registered buffer -- registered kmalloc'd memory for RDMA SEND/RECV
*
* The below structure appears at the front of a large region of kmalloc'd
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-24 21:27 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-24 21:26 [PATCH v4 00/16] NFS/RDMA patches for merging into v4.4 Chuck Lever
[not found] ` <20151024211707.4715.61650.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-10-24 21:26 ` [PATCH v4 01/16] xprtrdma: Enable swap-on-NFS/RDMA Chuck Lever
2015-10-24 21:26 ` [PATCH v4 02/16] xprtrdma: Re-arm after missed events Chuck Lever
2015-10-24 21:26 ` [PATCH v4 03/16] xprtrdma: Prevent loss of completion signals Chuck Lever
2015-10-24 21:26 ` [PATCH v4 04/16] xprtrdma: Refactor reply handler error handling Chuck Lever
2015-10-24 21:27 ` [PATCH v4 05/16] xprtrdma: Replace send and receive arrays Chuck Lever
2015-10-24 21:27 ` [PATCH v4 06/16] xprtrdma: Use workqueue to process RPC/RDMA replies Chuck Lever
2015-10-24 21:27 ` [PATCH v4 07/16] xprtrdma: Remove reply tasklet Chuck Lever
2015-10-24 21:27 ` [PATCH v4 08/16] xprtrdma: Saving IRQs no longer needed for rb_lock Chuck Lever
2015-10-24 21:27 ` [PATCH v4 09/16] SUNRPC: Abstract backchannel operations Chuck Lever
2015-10-24 21:27 ` [PATCH v4 10/16] xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers Chuck Lever
2015-10-24 21:27 ` Chuck Lever [this message]
2015-10-24 21:27 ` [PATCH v4 12/16] xprtrdma: Add support for sending backward direction RPC replies Chuck Lever
2015-10-24 21:28 ` [PATCH v4 13/16] xprtrdma: Handle incoming backward direction RPC calls Chuck Lever
2015-10-24 21:28 ` [PATCH v4 14/16] svcrdma: Add backward direction service for RPC/RDMA transport Chuck Lever
2015-10-24 21:28 ` [PATCH v4 15/16] SUNRPC: Remove the TCP-only restriction in bc_svc_process() Chuck Lever
2015-10-24 21:28 ` [PATCH v4 16/16] NFS: Enable client side NFSv4.1 backchannel to use other transports Chuck Lever
[not found] ` <20151024212832.4715.39528.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-11-02 20:43 ` Anna Schumaker
[not found] ` <5637CAFC.7070805-ZwjVKphTwtPQT0dZR+AlfA@public.gmane.org>
2015-11-02 21:16 ` Chuck Lever
[not found] ` <920F59C9-B37D-47AA-ADE8-F72B1958FE68-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2015-11-02 21:29 ` Anna Schumaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151024212751.4715.63525.stgit@manet.1015granger.net \
--to=chuck.lever-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=Anna.Schumaker-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org \
--cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).