[PATCH 22/37] IB/rdmavt: Add queue pair data structure to rdmavt

[Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>]

Add queue pair data structure as well as supporting structures to rdmavt.

Reviewed-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/infiniband/sw/rdmavt/qp.h |    5 -
 include/rdma/rdma_vt.h            |  233 +++++++++++++++++++++++++++++++++++++
 2 files changed, 233 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/sw/rdmavt/qp.h b/drivers/infiniband/sw/rdmavt/qp.h
index 4e4709f..c80d326 100644
--- a/drivers/infiniband/sw/rdmavt/qp.h
+++ b/drivers/infiniband/sw/rdmavt/qp.h
@@ -53,11 +53,6 @@
 
 #include <rdma/rdma_vt.h>
 
-struct rvt_qp {
-	struct ib_qp *ibqp;
-	/* Other stuff */
-};
-
 struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
 			    struct ib_qp_init_attr *init_attr,
 			    struct ib_udata *udata);
diff --git a/include/rdma/rdma_vt.h b/include/rdma/rdma_vt.h
index 39a0737..8d3a41a 100644
--- a/include/rdma/rdma_vt.h
+++ b/include/rdma/rdma_vt.h
@@ -109,6 +109,239 @@ struct rvt_lkey_table {
 /* End Memmory Region */
 
 /*
+ * Things needed for the Queue Pair definition. Like the MR stuff above the
+ * following should probably get moved to qp.h once drivers stop trying to make
+ * and manipulate thier own QPs. For the few instnaces where a driver may need
+ * to look into a queue pair there should be a pointer to a driver priavte data
+ * structure that they can look at.
+ */
+
+/*
+ * These keep track of the copy progress within a memory region.
+ * Used by the verbs layer.
+ */
+struct rvt_sge {
+	struct rvt_mregion *mr;
+	void *vaddr;            /* kernel virtual address of segment */
+	u32 sge_length;         /* length of the SGE */
+	u32 length;             /* remaining length of the segment */
+	u16 m;                  /* current index: mr->map[m] */
+	u16 n;                  /* current index: mr->map[m]->segs[n] */
+};
+
+/*
+ * Send work request queue entry.
+ * The size of the sg_list is determined when the QP is created and stored
+ * in qp->s_max_sge.
+ */
+struct rvt_swqe {
+	union {
+		struct ib_send_wr wr;   /* don't use wr.sg_list */
+		struct ib_ud_wr ud_wr;
+		struct ib_reg_wr reg_wr;
+		struct ib_rdma_wr rdma_wr;
+		struct ib_atomic_wr atomic_wr;
+	};
+	u32 psn;                /* first packet sequence number */
+	u32 lpsn;               /* last packet sequence number */
+	u32 ssn;                /* send sequence number */
+	u32 length;             /* total length of data in sg_list */
+	struct rvt_sge sg_list[0];
+};
+
+/*
+ * Receive work request queue entry.
+ * The size of the sg_list is determined when the QP (or SRQ) is created
+ * and stored in qp->r_rq.max_sge (or srq->rq.max_sge).
+ */
+struct rvt_rwqe {
+	u64 wr_id;
+	u8 num_sge;
+	struct ib_sge sg_list[0];
+};
+
+/*
+ * This structure is used to contain the head pointer, tail pointer,
+ * and receive work queue entries as a single memory allocation so
+ * it can be mmap'ed into user space.
+ * Note that the wq array elements are variable size so you can't
+ * just index into the array to get the N'th element;
+ * use get_rwqe_ptr() instead.
+ */
+struct rvt_rwq {
+	u32 head;               /* new work requests posted to the head */
+	u32 tail;               /* receives pull requests from here. */
+	struct rvt_rwqe wq[0];
+};
+
+struct rvt_rq {
+	struct rvt_rwq *wq;
+	u32 size;               /* size of RWQE array */
+	u8 max_sge;
+	/* protect changes in this struct */
+	spinlock_t lock ____cacheline_aligned_in_smp;
+};
+
+/*
+ * This structure is used by rvt_mmap() to validate an offset
+ * when an mmap() request is made.  The vm_area_struct then uses
+ * this as its vm_private_data.
+ */
+struct rvt_mmap_info {
+	struct list_head pending_mmaps;
+	struct ib_ucontext *context;
+	void *obj;
+	__u64 offset;
+	struct kref ref;
+	unsigned size;
+};
+
+#define RVT_MAX_RDMA_ATOMIC	16
+
+/*
+ * This structure holds the information that the send tasklet needs
+ * to send a RDMA read response or atomic operation.
+ */
+struct rvt_ack_entry {
+	u8 opcode;
+	u8 sent;
+	u32 psn;
+	u32 lpsn;
+	union {
+		struct rvt_sge rdma_sge;
+		u64 atomic_data;
+	};
+};
+
+struct rvt_sge_state {
+	struct rvt_sge *sg_list;      /* next SGE to be used if any */
+	struct rvt_sge sge;   /* progress state for the current SGE */
+	u32 total_len;
+	u8 num_sge;
+};
+
+/*
+ * Variables prefixed with s_ are for the requester (sender).
+ * Variables prefixed with r_ are for the responder (receiver).
+ * Variables prefixed with ack_ are for responder replies.
+ *
+ * Common variables are protected by both r_rq.lock and s_lock in that order
+ * which only happens in modify_qp() or changing the QP 'state'.
+ */
+struct rvt_qp {
+	struct ib_qp ibqp;
+	void *priv; /* Driver private data */
+	/* read mostly fields above and below */
+	struct ib_ah_attr remote_ah_attr;
+	struct ib_ah_attr alt_ah_attr;
+	struct rvt_qp __rcu *next;           /* link list for QPN hash table */
+	struct rvt_swqe *s_wq;  /* send work queue */
+	struct rvt_mmap_info *ip;
+
+	unsigned long timeout_jiffies;  /* computed from timeout */
+
+	enum ib_mtu path_mtu;
+	int srate_mbps;		/* s_srate (below) converted to Mbit/s */
+	u32 remote_qpn;
+	u32 pmtu;		/* decoded from path_mtu */
+	u32 qkey;               /* QKEY for this QP (for UD or RD) */
+	u32 s_size;             /* send work queue size */
+	u32 s_rnr_timeout;      /* number of milliseconds for RNR timeout */
+	u32 s_ahgpsn;           /* set to the psn in the copy of the header */
+
+	u8 state;               /* QP state */
+	u8 allowed_ops;		/* high order bits of allowed opcodes */
+	u8 qp_access_flags;
+	u8 alt_timeout;         /* Alternate path timeout for this QP */
+	u8 timeout;             /* Timeout for this QP */
+	u8 s_srate;
+	u8 s_mig_state;
+	u8 port_num;
+	u8 s_pkey_index;        /* PKEY index to use */
+	u8 s_alt_pkey_index;    /* Alternate path PKEY index to use */
+	u8 r_max_rd_atomic;     /* max number of RDMA read/atomic to receive */
+	u8 s_max_rd_atomic;     /* max number of RDMA read/atomic to send */
+	u8 s_retry_cnt;         /* number of times to retry */
+	u8 s_rnr_retry_cnt;
+	u8 r_min_rnr_timer;     /* retry timeout value for RNR NAKs */
+	u8 s_max_sge;           /* size of s_wq->sg_list */
+	u8 s_draining;
+
+	/* start of read/write fields */
+	atomic_t refcount ____cacheline_aligned_in_smp;
+	wait_queue_head_t wait;
+
+	struct rvt_ack_entry s_ack_queue[RVT_MAX_RDMA_ATOMIC + 1]
+		____cacheline_aligned_in_smp;
+	struct rvt_sge_state s_rdma_read_sge;
+
+	spinlock_t r_lock ____cacheline_aligned_in_smp;      /* used for APM */
+	unsigned long r_aflags;
+	u64 r_wr_id;            /* ID for current receive WQE */
+	u32 r_ack_psn;          /* PSN for next ACK or atomic ACK */
+	u32 r_len;              /* total length of r_sge */
+	u32 r_rcv_len;          /* receive data len processed */
+	u32 r_psn;              /* expected rcv packet sequence number */
+	u32 r_msn;              /* message sequence number */
+
+	u8 r_state;             /* opcode of last packet received */
+	u8 r_flags;
+	u8 r_head_ack_queue;    /* index into s_ack_queue[] */
+
+	struct list_head rspwait;       /* link for waiting to respond */
+
+	struct rvt_sge_state r_sge;     /* current receive data */
+	struct rvt_rq r_rq;             /* receive work queue */
+
+	spinlock_t s_lock ____cacheline_aligned_in_smp;
+	struct rvt_sge_state *s_cur_sge;
+	u32 s_flags;
+	struct rvt_swqe *s_wqe;
+	struct rvt_sge_state s_sge;     /* current send request data */
+	struct rvt_mregion *s_rdma_mr;
+	struct sdma_engine *s_sde; /* current sde */
+	u32 s_cur_size;         /* size of send packet in bytes */
+	u32 s_len;              /* total length of s_sge */
+	u32 s_rdma_read_len;    /* total length of s_rdma_read_sge */
+	u32 s_next_psn;         /* PSN for next request */
+	u32 s_last_psn;         /* last response PSN processed */
+	u32 s_sending_psn;      /* lowest PSN that is being sent */
+	u32 s_sending_hpsn;     /* highest PSN that is being sent */
+	u32 s_psn;              /* current packet sequence number */
+	u32 s_ack_rdma_psn;     /* PSN for sending RDMA read responses */
+	u32 s_ack_psn;          /* PSN for acking sends and RDMA writes */
+	u32 s_head;             /* new entries added here */
+	u32 s_tail;             /* next entry to process */
+	u32 s_cur;              /* current work queue entry */
+	u32 s_acked;            /* last un-ACK'ed entry */
+	u32 s_last;             /* last completed entry */
+	u32 s_ssn;              /* SSN of tail entry */
+	u32 s_lsn;              /* limit sequence number (credit) */
+	u16 s_hdrwords;         /* size of s_hdr in 32 bit words */
+	u16 s_rdma_ack_cnt;
+	s8 s_ahgidx;
+	u8 s_state;             /* opcode of last packet sent */
+	u8 s_ack_state;         /* opcode of packet to ACK */
+	u8 s_nak_state;         /* non-zero if NAK is pending */
+	u8 r_nak_state;         /* non-zero if NAK is pending */
+	u8 s_retry;             /* requester retry counter */
+	u8 s_rnr_retry;         /* requester RNR retry counter */
+	u8 s_num_rd_atomic;     /* number of RDMA read/atomic pending */
+	u8 s_tail_ack_queue;    /* index into s_ack_queue[] */
+
+	struct rvt_sge_state s_ack_rdma_sge;
+	struct timer_list s_timer;
+
+	/*
+	 * This sge list MUST be last. Do not add anything below here.
+	 */
+	struct rvt_sge r_sg_list[0] /* verified SGEs */
+		____cacheline_aligned_in_smp;
+};
+
+/* End QP section */
+
+/*
  * Things that are driver specific, module parameters in hfi1 and qib
  */
 struct rvt_driver_params {

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html