From: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: anna.schumaker-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v3 03/11] xprtrdma: Disable RPC/RDMA backchannel debugging messages
Date: Mon, 14 Dec 2015 16:18:03 -0500 [thread overview]
Message-ID: <20151214211802.16295.77428.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20151214211317.16295.70115.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
Clean up.
Fixes: 63cae47005af ('xprtrdma: Handle incoming backward direction')
Signed-off-by: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
---
net/sunrpc/xprtrdma/backchannel.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/net/sunrpc/xprtrdma/backchannel.c b/net/sunrpc/xprtrdma/backchannel.c
index 11d2cfb..cd31181 100644
--- a/net/sunrpc/xprtrdma/backchannel.c
+++ b/net/sunrpc/xprtrdma/backchannel.c
@@ -15,7 +15,7 @@
# define RPCDBG_FACILITY RPCDBG_TRANS
#endif
-#define RPCRDMA_BACKCHANNEL_DEBUG
+#undef RPCRDMA_BACKCHANNEL_DEBUG
static void rpcrdma_bc_free_rqst(struct rpcrdma_xprt *r_xprt,
struct rpc_rqst *rqst)
@@ -136,6 +136,7 @@ int xprt_rdma_bc_setup(struct rpc_xprt *xprt, unsigned int reqs)
__func__);
goto out_free;
}
+ dprintk("RPC: %s: new rqst %p\n", __func__, rqst);
rqst->rq_xprt = &r_xprt->rx_xprt;
INIT_LIST_HEAD(&rqst->rq_list);
@@ -216,12 +217,14 @@ int rpcrdma_bc_marshal_reply(struct rpc_rqst *rqst)
rpclen = rqst->rq_svec[0].iov_len;
+#ifdef RPCRDMA_BACKCHANNEL_DEBUG
pr_info("RPC: %s: rpclen %zd headerp 0x%p lkey 0x%x\n",
__func__, rpclen, headerp, rdmab_lkey(req->rl_rdmabuf));
pr_info("RPC: %s: RPC/RDMA: %*ph\n",
__func__, (int)RPCRDMA_HDRLEN_MIN, headerp);
pr_info("RPC: %s: RPC: %*ph\n",
__func__, (int)rpclen, rqst->rq_svec[0].iov_base);
+#endif
req->rl_send_iov[0].addr = rdmab_addr(req->rl_rdmabuf);
req->rl_send_iov[0].length = RPCRDMA_HDRLEN_MIN;
@@ -265,6 +268,9 @@ void xprt_rdma_bc_free_rqst(struct rpc_rqst *rqst)
{
struct rpc_xprt *xprt = rqst->rq_xprt;
+ dprintk("RPC: %s: freeing rqst %p (req %p)\n",
+ __func__, rqst, rpcr_to_rdmar(rqst));
+
smp_mb__before_atomic();
WARN_ON_ONCE(!test_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state));
clear_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state);
@@ -329,9 +335,7 @@ void rpcrdma_bc_receive_call(struct rpcrdma_xprt *r_xprt,
struct rpc_rqst, rq_bc_pa_list);
list_del(&rqst->rq_bc_pa_list);
spin_unlock(&xprt->bc_pa_lock);
-#ifdef RPCRDMA_BACKCHANNEL_DEBUG
- pr_info("RPC: %s: using rqst %p\n", __func__, rqst);
-#endif
+ dprintk("RPC: %s: using rqst %p\n", __func__, rqst);
/* Prepare rqst */
rqst->rq_reply_bytes_recvd = 0;
@@ -351,10 +355,8 @@ void rpcrdma_bc_receive_call(struct rpcrdma_xprt *r_xprt,
* direction reply.
*/
req = rpcr_to_rdmar(rqst);
-#ifdef RPCRDMA_BACKCHANNEL_DEBUG
- pr_info("RPC: %s: attaching rep %p to req %p\n",
+ dprintk("RPC: %s: attaching rep %p to req %p\n",
__func__, rep, req);
-#endif
req->rl_reply = rep;
/* Defeat the retransmit detection logic in send_request */
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-14 21:18 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-14 21:17 [PATCH v3 00/11] NFS/RDMA client patches for 4.5 Chuck Lever
[not found] ` <20151214211317.16295.70115.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-12-14 21:17 ` [PATCH v3 01/11] xprtrdma: Fix additional uses of spin_lock_irqsave(rb_lock) Chuck Lever
2015-12-14 21:17 ` [PATCH v3 02/11] xprtrdma: xprt_rdma_free() must not release backchannel reqs Chuck Lever
2015-12-14 21:18 ` Chuck Lever [this message]
2015-12-14 21:18 ` [PATCH v3 04/11] xprtrdma: Move struct ib_send_wr off the stack Chuck Lever
[not found] ` <20151214211811.16295.47695.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-12-16 14:00 ` Sagi Grimberg
[not found] ` <56716E6C.4020604-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-12-16 15:06 ` Chuck Lever
[not found] ` <F2E992ED-2698-43DE-B7C5-4F02DA75AE42-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2015-12-16 15:11 ` Christoph Hellwig
[not found] ` <20151216151115.GA16905-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2015-12-16 15:13 ` Chuck Lever
[not found] ` <D5B6F9FD-FF8F-4F37-A3E5-B287B91B1EA4-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2015-12-16 15:17 ` Christoph Hellwig
2015-12-14 21:18 ` [PATCH v3 05/11] xprtrdma: Introduce ro_unmap_sync method Chuck Lever
2015-12-14 21:18 ` [PATCH v3 06/11] xprtrdma: Add ro_unmap_sync method for FRWR Chuck Lever
[not found] ` <20151214211827.16295.76338.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-12-16 13:57 ` Sagi Grimberg
[not found] ` <56716DE4.8080403-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-12-16 15:09 ` Chuck Lever
2015-12-14 21:18 ` [PATCH v3 07/11] xprtrdma: Add ro_unmap_sync method for FMR Chuck Lever
2015-12-14 21:19 ` [PATCH v3 08/11] xprtrdma: Add ro_unmap_sync method for all-physical registration Chuck Lever
2015-12-14 21:19 ` [PATCH v3 09/11] SUNRPC: Introduce xprt_commit_rqst() Chuck Lever
[not found] ` <20151214211915.16295.30339.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2015-12-16 13:48 ` Anna Schumaker
[not found] ` <56716BB4.8080500-ZwjVKphTwtPQT0dZR+AlfA@public.gmane.org>
2015-12-16 15:12 ` Chuck Lever
2015-12-14 21:19 ` [PATCH v3 10/11] xprtrdma: Invalidate in the RPC reply handler Chuck Lever
2015-12-14 21:19 ` [PATCH v3 11/11] xprtrdma: Revert commit e7104a2a9606 ('xprtrdma: Cap req_cqinit') Chuck Lever
2015-12-15 19:37 ` [PATCH v3 00/11] NFS/RDMA client patches for 4.5 Anna Schumaker
[not found] ` <56706BE0.7010609-ZwjVKphTwtPQT0dZR+AlfA@public.gmane.org>
2015-12-16 12:11 ` Devesh Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151214211802.16295.77428.stgit@manet.1015granger.net \
--to=chuck.lever-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=anna.schumaker-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org \
--cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox