From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Dean Luick <dean.luick-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Sebastian Sanchez
<sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 06/10] IB/hfi1: Update pkey table properly after link down or FM start
Date: Tue, 24 May 2016 12:50:47 -0700 [thread overview]
Message-ID: <20160524195045.19706.93754.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20160524194746.19706.42976.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Sebastian Sanchez <sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
When FM is disabled, and the HFI port on the switch is
changed from MgmtAllowed=YES to MgmtAllowed=NO and the
link is bounced, FULL_MGMT_P_KEY doesn't get cleared
from the pkey table. This also occurs when the QSFP
cable is moved from a switch port with MgmtAllowed=YES
to a MgmtAllowed=NO port. Clear pkey entry properly.
Also, when the driver is loaded and the switch port is
set to MgmtAllowed=NO, FULL_MGMT_P_KEY shouldn't be added
to pkey table after FM is started. Only set FULL_MGMT_P_KEY
in the pkey table if switch port is configured to
MgmtAllowed=YES.
Reviewed-by: Dean Luick <dean.luick-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/chip.c | 9 +++++++++
drivers/infiniband/hw/hfi1/mad.c | 6 ++++++
2 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index d8cc329..3b876da 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -1037,6 +1037,7 @@ static void dc_shutdown(struct hfi1_devdata *);
static void dc_start(struct hfi1_devdata *);
static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp,
unsigned int *np);
+static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd);
/*
* Error interrupt table entry. This is used as input to the interrupt
@@ -6961,6 +6962,8 @@ void handle_link_down(struct work_struct *work)
}
reset_neighbor_info(ppd);
+ if (ppd->mgmt_allowed)
+ remove_full_mgmt_pkey(ppd);
/* disable the port */
clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK);
@@ -7069,6 +7072,12 @@ static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd)
(void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0);
}
+static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd)
+{
+ ppd->pkeys[2] = 0;
+ (void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0);
+}
+
/*
* Convert the given link width to the OPA link width bitmask.
*/
diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c
index 17882dc..2190295 100644
--- a/drivers/infiniband/hw/hfi1/mad.c
+++ b/drivers/infiniband/hw/hfi1/mad.c
@@ -1403,6 +1403,12 @@ static int set_pkeys(struct hfi1_devdata *dd, u8 port, u16 *pkeys)
if (key == okey)
continue;
/*
+ * Don't update pkeys[2], if an HFI port without MgmtAllowed
+ * by neighbor is a switch.
+ */
+ if (i == 2 && !ppd->mgmt_allowed && ppd->neighbor_type == 1)
+ continue;
+ /*
* The SM gives us the complete PKey table. We have
* to ensure that we put the PKeys in the matching
* slots.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-05-24 19:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 19:50 [PATCH 00/10] IB/hfi1,rdmavt: Another set of fixes for 4.7 Dennis Dalessandro
[not found] ` <20160524194746.19706.42976.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-05-24 19:50 ` [PATCH 01/10] IB/hfi1, qib: Add ieth to the packet header definitions Dennis Dalessandro
2016-05-24 19:50 ` [PATCH 02/10] IB/hfi1: Add tracing support for send with invalidate opcode Dennis Dalessandro
2016-05-24 19:50 ` [PATCH 03/10] IB/hfi1: Fix hard lockup due to not using save/restore spin lock Dennis Dalessandro
2016-05-24 19:50 ` [PATCH 04/10] IB/rdmavt: Max atomic value should be a u8 Dennis Dalessandro
2016-05-24 19:50 ` [PATCH 05/10] IB/rdamvt: Fix rdmavt s_ack_queue sizing Dennis Dalessandro
[not found] ` <20160524195039.19706.66866.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-05-25 18:29 ` Leon Romanovsky
[not found] ` <20160525182928.GP25500-2ukJVAZIZ/Y@public.gmane.org>
2016-05-25 19:05 ` Dennis Dalessandro
2016-05-24 19:50 ` Dennis Dalessandro [this message]
2016-05-24 19:50 ` [PATCH 07/10] IB/hfi1: Add a retry for the first-time QSFP access Dennis Dalessandro
[not found] ` <6395227d-617c-bd70-2822-6b53843f8611@redhat.com>
[not found] ` <6395227d-617c-bd70-2822-6b53843f8611-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-05-26 17:39 ` Dennis Dalessandro
2016-05-24 19:51 ` [PATCH 08/10] IB/hfi1: Correct 8051 link parameter settings Dennis Dalessandro
2016-05-24 19:51 ` [PATCH 09/10] IB/hfi1: Fix pio map initialization Dennis Dalessandro
2016-05-24 19:51 ` [PATCH 10/10] IB/hfi1: Fix credit return threshold adjustment Dennis Dalessandro
[not found] ` <20160524195111.19706.76829.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-05-25 13:36 ` Leon Romanovsky
[not found] ` <20160525133613.GN25500-2ukJVAZIZ/Y@public.gmane.org>
2016-05-25 15:27 ` Bart Van Assche
[not found] ` <602d7329-b8ee-0e90-3afb-726ec44fb190-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-05-25 18:52 ` Dennis Dalessandro
2016-05-26 16:25 ` [PATCH 00/10] IB/hfi1,rdmavt: Another set of fixes for 4.7 Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160524195045.19706.93754.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dean.luick-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox