From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mike Marciniszyn
<mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Jianxin Xiong
<jianxin.xiong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH for-next 18/18] IB/rdmavt: Use new driver specific post send table
Date: Fri, 01 Jul 2016 16:02:24 -0700 [thread overview]
Message-ID: <20160701230223.20160.95655.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20160701225824.20160.19055.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Change rvt_post_one_wr to use the new table mechanism for
post send.
Validate that each low level driver specifies the table.
Reviewed-by: Jianxin Xiong <jianxin.xiong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/sw/rdmavt/qp.c | 46 ++++++-------------------------------
drivers/infiniband/sw/rdmavt/vt.c | 3 ++
2 files changed, 10 insertions(+), 39 deletions(-)
diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
index d2b5b54..ebc37f5 100644
--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -1535,6 +1535,7 @@ static int rvt_post_one_wr(struct rvt_qp *qp,
struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
u8 log_pmtu;
int ret;
+ size_t cplen;
BUILD_BUG_ON(IB_QPT_MAX >= (sizeof(u32) * BITS_PER_BYTE));
@@ -1542,32 +1543,11 @@ static int rvt_post_one_wr(struct rvt_qp *qp,
if (unlikely(wr->num_sge > qp->s_max_sge))
return -EINVAL;
- /*
- * Don't allow RDMA reads or atomic operations on UC or
- * undefined operations.
- * Make sure buffer is large enough to hold the result for atomics.
- */
- if (qp->ibqp.qp_type == IB_QPT_UC) {
- if ((unsigned)wr->opcode >= IB_WR_RDMA_READ)
- return -EINVAL;
- } else if (qp->ibqp.qp_type != IB_QPT_RC) {
- /* Check IB_QPT_SMI, IB_QPT_GSI, IB_QPT_UD opcode */
- if (wr->opcode != IB_WR_SEND &&
- wr->opcode != IB_WR_SEND_WITH_IMM)
- return -EINVAL;
- /* Check UD destination address PD */
- if (qp->ibqp.pd != ud_wr(wr)->ah->pd)
- return -EINVAL;
- } else if ((unsigned)wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD) {
- return -EINVAL;
- } else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP &&
- (wr->num_sge == 0 ||
- wr->sg_list[0].length < sizeof(u64) ||
- wr->sg_list[0].addr & (sizeof(u64) - 1))) {
- return -EINVAL;
- } else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic) {
- return -EINVAL;
- }
+ ret = rvt_qp_valid_operation(qp, rdi->post_parms, wr);
+ if (ret < 0)
+ return ret;
+ cplen = ret;
+
/* check for avail */
if (unlikely(!qp->s_avail)) {
qp->s_avail = qp_get_savail(qp);
@@ -1588,18 +1568,8 @@ static int rvt_post_one_wr(struct rvt_qp *qp,
pd = ibpd_to_rvtpd(qp->ibqp.pd);
wqe = rvt_get_swqe_ptr(qp, qp->s_head);
- if (qp->ibqp.qp_type != IB_QPT_UC &&
- qp->ibqp.qp_type != IB_QPT_RC)
- memcpy(&wqe->ud_wr, ud_wr(wr), sizeof(wqe->ud_wr));
- else if (wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM ||
- wr->opcode == IB_WR_RDMA_WRITE ||
- wr->opcode == IB_WR_RDMA_READ)
- memcpy(&wqe->rdma_wr, rdma_wr(wr), sizeof(wqe->rdma_wr));
- else if (wr->opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wr->opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
- memcpy(&wqe->atomic_wr, atomic_wr(wr), sizeof(wqe->atomic_wr));
- else
- memcpy(&wqe->wr, wr, sizeof(wqe->wr));
+ /* cplen has length from above */
+ memcpy(&wqe->wr, wr, cplen);
wqe->length = 0;
j = 0;
diff --git a/drivers/infiniband/sw/rdmavt/vt.c b/drivers/infiniband/sw/rdmavt/vt.c
index 30c4fda..89fe967 100644
--- a/drivers/infiniband/sw/rdmavt/vt.c
+++ b/drivers/infiniband/sw/rdmavt/vt.c
@@ -528,7 +528,8 @@ static noinline int check_support(struct rvt_dev_info *rdi, int verb)
post_send),
rvt_post_send))
if (!rdi->driver_f.schedule_send ||
- !rdi->driver_f.do_send)
+ !rdi->driver_f.do_send ||
+ !rdi->post_parms)
return -EINVAL;
break;
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-07-01 23:02 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-01 23:00 [PATCH for-next 00/18] IB/hfi1, rdmavt, qib: First batch of fixes for 4.8 Dennis Dalessandro
[not found] ` <20160701225824.20160.19055.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-07-01 23:00 ` [PATCH for-next 01/18] IB/hfi1: Clean up port state structure definition Dennis Dalessandro
2016-07-01 23:00 ` [PATCH for-next 02/18] IB/hfi1: Remove unnecessary done label in hfi1_write_iter Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 03/18] IB/hfi1: Fix typo Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 04/18] IB/hfi1: Separate tracepoints into specific headers Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 05/18] IB/hfi1: Fix trace sparse errors Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 06/18] IB/hfi1: Add VL XmitDiscards counters to the opapmaquery Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 07/18] IB/hfi1: Add counter to track unsupported packets drop Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 08/18] IB/hfi1: Add global structure for affinity assignments Dennis Dalessandro
[not found] ` <20160701230127.20160.68709.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-07-25 14:52 ` [PATCH v2] " Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 09/18] IB/hfi1: Reserve and collapse CPU cores for contexts Dennis Dalessandro
[not found] ` <20160701230133.20160.76302.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-07-25 14:54 ` [PATCH v2] " Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 10/18] IB/hfi1: Refine user process affinity algorithm Dennis Dalessandro
[not found] ` <20160701230138.20160.5753.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-07-25 14:54 ` [PATCH v2] " Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 11/18] IB/hfi1: Use built-in i2c bit-shift bus adapter Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 12/18] IB/hfi1: Remove TWSI references Dennis Dalessandro
2016-07-01 23:01 ` [PATCH for-next 13/18] IB/hfi1: Improve SDMA engine assignment for user SDMA Dennis Dalessandro
2016-07-01 23:02 ` [PATCH for-next 14/18] IB/hfi1: Correct receive packet handler assignment Dennis Dalessandro
2016-07-01 23:02 ` [PATCH for-next 15/18] IB/rdmavt: Add data structures and routines for table driven post send Dennis Dalessandro
2016-07-01 23:02 ` [PATCH for-next 16/18] IB/hfi1: Add hfi1 post send tables Dennis Dalessandro
2016-07-01 23:02 ` [PATCH for-next 17/18] IB/qib: Add qib post send table Dennis Dalessandro
2016-07-01 23:02 ` Dennis Dalessandro [this message]
2016-08-02 19:58 ` [PATCH for-next 00/18] IB/hfi1, rdmavt, qib: First batch of fixes for 4.8 Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160701230223.20160.95655.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=jianxin.xiong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox