From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: Harish Chegondi
<harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mitko Haralanov
<mitko.haralanov-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Jubin John <jubin.john-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Dan Carpenter
<dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 2/5] IB/hfi1: Fix AHG KDETH Intr shift
Date: Wed, 31 Aug 2016 07:24:27 -0700 [thread overview]
Message-ID: <20160831142425.27232.97663.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20160831141841.27232.61621.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
In the set_txreq_header_ahg(), The KDETH Intr bit is obtained from the
header in the user sdma request using a KDETH_GET shift and mask macro.
This value is then futher right shifted by 16 causing us to lose the
value i.e it is shifted to zero, leading to the following
smatch warning:
drivers/infiniband/hw/hfi1/user_sdma.c:1482 set_txreq_header_ahg()
warn: mask and shift to zero
The Intr bit should be left shifted into its correct position in the
KDETH header before the AHG update.
Reported-by: Dan Carpenter <dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Mitko Haralanov <mitko.haralanov-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Reviewed-by: Harish Chegondi <harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jubin John <jubin.john-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/user_sdma.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c
index 0ecf279..1694037 100644
--- a/drivers/infiniband/hw/hfi1/user_sdma.c
+++ b/drivers/infiniband/hw/hfi1/user_sdma.c
@@ -114,6 +114,8 @@ MODULE_PARM_DESC(sdma_comp_size, "Size of User SDMA completion ring. Default: 12
#define KDETH_HCRC_LOWER_SHIFT 24
#define KDETH_HCRC_LOWER_MASK 0xff
+#define AHG_KDETH_INTR_SHIFT 12
+
#define PBC2LRH(x) ((((x) & 0xfff) << 2) - 4)
#define LRH2PBC(x) ((((x) >> 2) + 1) & 0xfff)
@@ -1480,7 +1482,8 @@ static int set_txreq_header_ahg(struct user_sdma_request *req,
/* Clear KDETH.SH on last packet */
if (unlikely(tx->flags & TXREQ_FLAGS_REQ_LAST_PKT)) {
val |= cpu_to_le16(KDETH_GET(hdr->kdeth.ver_tid_offset,
- INTR) >> 16);
+ INTR) <<
+ AHG_KDETH_INTR_SHIFT);
val &= cpu_to_le16(~(1U << 13));
AHG_HEADER_SET(req->ahg, diff, 7, 16, 14, val);
} else {
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-31 14:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-31 14:24 [PATCH 0/5] IB/hfi1: For 4.8 rc 5 Dennis Dalessandro
[not found] ` <20160831141841.27232.61621.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-08-31 14:24 ` [PATCH 1/5] IB/hfi1: Fix SGE length for misaligned PIO copy Dennis Dalessandro
2016-08-31 14:24 ` Dennis Dalessandro [this message]
[not found] ` <20160831142425.27232.97663.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-08-31 15:26 ` [PATCH 2/5] IB/hfi1: Fix AHG KDETH Intr shift Dalessandro, Dennis
2016-08-31 14:24 ` [PATCH 3/5] IB/hfi1: Add QSFP sanity pre-check Dennis Dalessandro
2016-08-31 14:24 ` [PATCH 4/5] IB/hfi1: Make n_krcvqs be an unsigned long integer Dennis Dalessandro
2016-08-31 14:24 ` [PATCH 5/5] IB/hfi1: Rework debugfs to use SRCU Dennis Dalessandro
2016-09-02 18:33 ` [PATCH 0/5] IB/hfi1: For 4.8 rc 5 Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160831142425.27232.97663.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=jubin.john-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mitko.haralanov-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox