[infiniband-diags PATCH 4/4] A few typo fixes in the manpages

["Ana Guerrero López" <ana-kLLpUjk7vcnYtjvyW6yDsg@public.gmane.org>]

They have been detected by lintian, the Debian package checker

Signed-off-by: Ana Guerrero López <ana-kLLpUjk7vcnYtjvyW6yDsg@public.gmane.org>
---
 doc/rst/iblinkinfo.8.in.rst       | 4 ++--
 doc/rst/ibqueryerrors.8.in.rst    | 2 +-
 doc/rst/infiniband-diags.8.in.rst | 4 ++--
 doc/rst/rdma-ndd.8.in.rst         | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/doc/rst/iblinkinfo.8.in.rst b/doc/rst/iblinkinfo.8.in.rst
index ee2aefb..5f87f37 100644
--- a/doc/rst/iblinkinfo.8.in.rst
+++ b/doc/rst/iblinkinfo.8.in.rst
@@ -57,7 +57,7 @@ The node to start a partial scan can be specified with the following addresses.
 
 **--switch, -S <port_guid>** same as "-G". (provided only for backward compatibility)
 
-How much of the scan to be printed can be controled with the following.
+How much of the scan to be printed can be controlled with the following.
 
 **--all, -a**
 Print all nodes found in a partial fabric scan.  Normally a
@@ -81,7 +81,7 @@ Filter downports indicated in a ibnetdiscover cache.  If a port was previously
 indicated as down in the specified cache, and is still down, do not output it in the
 resulting output.  This option may be particularly useful for environments
 where switches are not fully populated, thus much of the default iblinkinfo
-info is considered unuseful.  See **ibnetdiscover** for information on caching
+info is considered useless.  See **ibnetdiscover** for information on caching
 ibnetdiscover output.
 
 
diff --git a/doc/rst/ibqueryerrors.8.in.rst b/doc/rst/ibqueryerrors.8.in.rst
index df2901c..0a7992b 100644
--- a/doc/rst/ibqueryerrors.8.in.rst
+++ b/doc/rst/ibqueryerrors.8.in.rst
@@ -63,7 +63,7 @@ using a QoS aware routing engine as it can cause a credit deadlock.
 
 **CAUTION** clearing data or error counters will occur regardless of if they
 are printed or not.  See **--counters** and **--data** for details on
-controling which counters are printed.
+controlling which counters are printed.
 
 **--details** include receive error and transmit discard details
 
diff --git a/doc/rst/infiniband-diags.8.in.rst b/doc/rst/infiniband-diags.8.in.rst
index 7776a30..be77ce3 100644
--- a/doc/rst/infiniband-diags.8.in.rst
+++ b/doc/rst/infiniband-diags.8.in.rst
@@ -120,8 +120,8 @@ Switch Forwarding Table info
 
 	See: ibtracert, ibroute, dump_lfts, dump_mfts, check_lft_balance, ibfindnodesusing
 
-Peformance counters
--------------------
+Performance counters
+--------------------
 
 	See: ibqueryerrors, perfquery
 
diff --git a/doc/rst/rdma-ndd.8.in.rst b/doc/rst/rdma-ndd.8.in.rst
index 708a5ab..1d126db 100644
--- a/doc/rst/rdma-ndd.8.in.rst
+++ b/doc/rst/rdma-ndd.8.in.rst
@@ -27,7 +27,7 @@ those changes.
 DETAILS
 =======
 
-Full operation of this deamon requires kernels which support polling of the
+Full operation of this daemon requires kernels which support polling of the
 procfs hostname file as well as libudev.
 
 If your system does not support either of these features, the daemon will set
@@ -37,7 +37,7 @@ the Node Descriptions at start up and then sleep forever.
 Node Description format
 -----------------------
 
-The deamon uses the nd_format configuration option within the ibdiags.conf
+The daemon uses the nd_format configuration option within the ibdiags.conf
 file.  %h and %d can be used as wildcards in that string to specify the dynamic
 use of <hostname> and <device> respectively.
 
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html