From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mike Marciniszyn
<mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH for-next 12/13] IB/rdmavt: Add qp init function
Date: Tue, 06 Sep 2016 04:37:26 -0700 [thread overview]
Message-ID: <20160906113712.27413.71087.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20160906112758.27413.46860.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Add an rvt_qp_init() to initialize specific
common fields as the qp is created or reset.
The routine is shared by the rvt_reset_qp() and
the rvt_create_qp().
The intent is that lock dep assertions will only
appear in the rvt_reset_qp().
Reviewed-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/sw/rdmavt/qp.c | 100 +++++++++++++++++++++----------------
1 files changed, 58 insertions(+), 42 deletions(-)
diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
index 0a29815..673e2f6 100644
--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -493,50 +493,18 @@ static void rvt_remove_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp)
}
/**
- * reset_qp - initialize the QP state to the reset state
- * @qp: the QP to reset
+ * rvt_init_qp - initialize the QP state to the reset state
+ * @qp: the QP to init or reinit
* @type: the QP type
- * r and s lock are required to be held by the caller
+ *
+ * This function is called from both rvt_create_qp() and
+ * rvt_reset_qp(). The difference is that the reset
+ * patch the necessary locks to protect against concurent
+ * access.
*/
-static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp,
- enum ib_qp_type type)
- __must_hold(&qp->r_lock)
- __must_hold(&qp->s_hlock)
- __must_hold(&qp->s_lock)
+static void rvt_init_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp,
+ enum ib_qp_type type)
{
- if (qp->state != IB_QPS_RESET) {
- qp->state = IB_QPS_RESET;
-
- /* Let drivers flush their waitlist */
- rdi->driver_f.flush_qp_waiters(qp);
- qp->s_flags &= ~(RVT_S_TIMER | RVT_S_ANY_WAIT);
- spin_unlock(&qp->s_lock);
- spin_unlock(&qp->s_hlock);
- spin_unlock_irq(&qp->r_lock);
-
- /* Stop the send queue and the retry timer */
- rdi->driver_f.stop_send_queue(qp);
-
- /* Wait for things to stop */
- rdi->driver_f.quiesce_qp(qp);
-
- /* take qp out the hash and wait for it to be unused */
- rvt_remove_qp(rdi, qp);
- wait_event(qp->wait, !atomic_read(&qp->refcount));
-
- /* grab the lock b/c it was locked at call time */
- spin_lock_irq(&qp->r_lock);
- spin_lock(&qp->s_hlock);
- spin_lock(&qp->s_lock);
-
- rvt_clear_mr_refs(qp, 1);
- /*
- * Let the driver do any tear down it needs to for a qp
- * that has been reset
- */
- rdi->driver_f.notify_qp_reset(qp);
- }
-
qp->remote_qpn = 0;
qp->qkey = 0;
qp->qp_access_flags = 0;
@@ -582,6 +550,54 @@ static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp,
}
/**
+ * rvt_reset_qp - initialize the QP state to the reset state
+ * @qp: the QP to reset
+ * @type: the QP type
+ *
+ * r_lock, s_hlock, and s_lock are required to be held by the caller
+ */
+static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp,
+ enum ib_qp_type type)
+ __must_hold(&qp->s_lock)
+ __must_hold(&qp->s_hlock)
+ __must_hold(&qp->r_lock)
+{
+ if (qp->state != IB_QPS_RESET) {
+ qp->state = IB_QPS_RESET;
+
+ /* Let drivers flush their waitlist */
+ rdi->driver_f.flush_qp_waiters(qp);
+ qp->s_flags &= ~(RVT_S_TIMER | RVT_S_ANY_WAIT);
+ spin_unlock(&qp->s_lock);
+ spin_unlock(&qp->s_hlock);
+ spin_unlock_irq(&qp->r_lock);
+
+ /* Stop the send queue and the retry timer */
+ rdi->driver_f.stop_send_queue(qp);
+
+ /* Wait for things to stop */
+ rdi->driver_f.quiesce_qp(qp);
+
+ /* take qp out the hash and wait for it to be unused */
+ rvt_remove_qp(rdi, qp);
+ wait_event(qp->wait, !atomic_read(&qp->refcount));
+
+ /* grab the lock b/c it was locked at call time */
+ spin_lock_irq(&qp->r_lock);
+ spin_lock(&qp->s_hlock);
+ spin_lock(&qp->s_lock);
+
+ rvt_clear_mr_refs(qp, 1);
+ /*
+ * Let the driver do any tear down or re-init it needs to for
+ * a qp that has been reset
+ */
+ rdi->driver_f.notify_qp_reset(qp);
+ }
+ rvt_init_qp(rdi, qp, type);
+}
+
+/**
* rvt_create_qp - create a queue pair for a device
* @ibpd: the protection domain who's device we create the queue pair for
* @init_attr: the attributes of the queue pair
@@ -761,7 +777,7 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
}
qp->ibqp.qp_num = err;
qp->port_num = init_attr->port_num;
- rvt_reset_qp(rdi, qp, init_attr->qp_type);
+ rvt_init_qp(rdi, qp, init_attr->qp_type);
break;
default:
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-09-06 11:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-06 11:33 [PATCH for-next 00/13] IB/rdmavt/qib/hfi1/core: First round for 4.9 Dennis Dalessandro
[not found] ` <20160906112758.27413.46860.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-09-06 11:34 ` [PATCH for-next 01/13] IB/rdmavt: Add functions to get and release QP references Dennis Dalessandro
2016-09-06 11:34 ` [PATCH for-next 02/13] IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines Dennis Dalessandro
2016-09-06 11:34 ` [PATCH for-next 03/13] IB/core: Add ib headers for general use Dennis Dalessandro
2016-09-06 11:35 ` [PATCH for-next 04/13] IB/qib,IB/hfi: Use core common header file Dennis Dalessandro
2016-09-06 11:35 ` [PATCH for-next 05/13] IB/hfi1: Move serdes tune inside link start function Dennis Dalessandro
2016-09-06 11:35 ` [PATCH for-next 06/13] IB/hfi1: Fix the count of user packets submitted to an SDMA engine Dennis Dalessandro
2016-09-06 11:35 ` [PATCH for-next 07/13] IB/hfi1: Fix user-space buffers mapping with IOMMU enabled Dennis Dalessandro
2016-09-06 11:36 ` [PATCH for-next 08/13] IB/hfi1: Fix locking scheme for affinity settings Dennis Dalessandro
2016-09-06 11:36 ` [PATCH for-next 09/13] IB/rdmavt: Correct sparse annotation Dennis Dalessandro
2016-09-06 11:36 ` [PATCH for-next 10/13] IB/hfi1: Move iowait_init() to priv allocate Dennis Dalessandro
2016-09-06 11:37 ` [PATCH for-next 11/13] IB/rdmavt: Move reset calldown to reset path Dennis Dalessandro
2016-09-06 11:37 ` Dennis Dalessandro [this message]
2016-09-06 11:37 ` [PATCH for-next 13/13] IB/rdmavt, IB/hfi1: Add lockdep asserts for lock debug Dennis Dalessandro
2016-09-16 18:32 ` [PATCH for-next 00/13] IB/rdmavt/qib/hfi1/core: First round for 4.9 Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160906113712.27413.71087.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).