public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Jack Morgenstein
	<jackm-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
Subject: Re: [PATCH rdma-rc 4/7] IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets
Date: Sun, 18 Sep 2016 09:53:56 +0300	[thread overview]
Message-ID: <20160918065356.GA2923@leon.nu> (raw)
In-Reply-To: <4ad7c7fb-71a4-8ac4-f3a2-d0b4f2001385-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 2816 bytes --]

On Fri, Sep 16, 2016 at 02:01:57PM -0400, Doug Ledford wrote:
> On 9/12/2016 12:16 PM, Leon Romanovsky wrote:
> > From: Jack Morgenstein <jackm-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
> >
> > In MLX qp packets, the LRH (built by the driver) has both a VL field
> > and an SL field. When building a QP1 packet, the VL field should
> > reflect the SLtoVL mapping and not arbitrarily contain zero (as is
> > done now). This bug causes credit problems in IB switches at
> > high rates of QP1 packets.
> >
> > The fix is to cache the SL to VL mapping in the driver, and look up
> > the VL mapped to the SL provided in the send request when sending
> > QP1 packets.
> >
> > For FW versions which support generating a port_management_config_change
> > event with subtype sl-to-vl-table-change, the driver uses that event
> > to update its sl-to-vl mapping cache.  Otherwise, the driver snoops
> > incoming SMP mads to update the cache.
> >
> > There remains the case where the FW is running in secure-host mode
> > (so no QP0 packets are delivered to the driver), and the FW does not
> > generate the sl2vl mapping change event. To support this case, the
> > driver updates (via querying the FW) its sl2vl mapping cache when
> > running in secure-host mode when it receives either a Port Up event
> > or a client-reregister event (where the port is still up, but there
> > may have been an opensm failover).
> > OpenSM modifies the sl2vl mapping before Port Up and Client-reregister
> > events occur, so if there is a mapping change the driver's cache will
> > be properly updated.
> >
> > Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
> > Signed-off-by: Jack Morgenstein <jackm-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
> > Signed-off-by: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> > ---
> >  drivers/infiniband/hw/mlx4/mad.c        |  64 ++++++++++++++++++-
> >  drivers/infiniband/hw/mlx4/main.c       | 110 +++++++++++++++++++++++++++++++-
> >  drivers/infiniband/hw/mlx4/mlx4_ib.h    |   7 ++
> >  drivers/infiniband/hw/mlx4/qp.c         |  23 ++++++-
> >  drivers/net/ethernet/mellanox/mlx4/fw.c |  13 ++--
> >  include/linux/mlx4/device.h             |  13 +++-
> >  6 files changed, 220 insertions(+), 10 deletions(-)
>
> That's a lot more code churn than I would like to see in a late RC.  I'm
> going to drop this patch and move it to 4.9 instead.  If this fixed an
> oops or something like that, I would be more open to taking it now, but
> the problem being resolved is credits on a switch.  That isn't the sort
> of showstopper issue that would justify this large of a patch this late
> in the cycle.

No problem, Thanks.

>
>
> --
> Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>     GPG Key ID: 0E572FDD
>




[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  parent reply	other threads:[~2016-09-18  6:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-12 16:16 [PATCH rdma-rc 0/7] Second round of mlx4/mlx5 fixes for 4.8 Leon Romanovsky
     [not found] ` <1473696984-6161-1-git-send-email-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-09-12 16:16   ` [PATCH rdma-rc 1/7] IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV Leon Romanovsky
2016-09-12 16:16   ` [PATCH rdma-rc 2/7] IB/mlx4: Fix code indentation in QP1 MAD flow Leon Romanovsky
2016-09-12 16:16   ` [PATCH rdma-rc 3/7] IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV Leon Romanovsky
2016-09-12 16:16   ` [PATCH rdma-rc 4/7] IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets Leon Romanovsky
     [not found]     ` <1473696984-6161-5-git-send-email-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-09-16 18:01       ` Doug Ledford
     [not found]         ` <4ad7c7fb-71a4-8ac4-f3a2-d0b4f2001385-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-09-18  6:53           ` Leon Romanovsky [this message]
     [not found]             ` <20160918065356.GA2923-2ukJVAZIZ/Y@public.gmane.org>
2016-09-23 16:48               ` Doug Ledford
2016-09-12 16:16   ` [PATCH rdma-rc 5/7] IB/mlx4: Diagnostic HW counters are not supported in slave mode Leon Romanovsky
2016-09-12 16:16   ` [PATCH rdma-rc 6/7] IB/mlx5: Enable MAD_IFC commands for IB ports only Leon Romanovsky
     [not found]     ` <1473696984-6161-7-git-send-email-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-09-13  5:43       ` Leon Romanovsky
2016-09-12 16:16   ` [PATCH rdma-rc 7/7] IB/mlx5: Set source mac address in FTE Leon Romanovsky
2016-09-16 18:02   ` [PATCH rdma-rc 0/7] Second round of mlx4/mlx5 fixes for 4.8 Doug Ledford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160918065356.GA2923@leon.nu \
    --to=leon-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=jackm-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox