From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mike Marciniszyn
<mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Jianxin Xiong
<jianxin.xiong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 04/13] IB/hfi1: Increase default settings of max_cqes and max_qps
Date: Sun, 25 Sep 2016 07:41:18 -0700 [thread overview]
Message-ID: <20160925144116.10261.70434.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20160925143656.10261.85231.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Jianxin Xiong <jianxin.xiong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
The ib_write_bw test allows using up to 16384 QPs. When a relatively
large number of QPs (within that range) is used, the test can fail
because the number of CQ entries needed exceeds the limit set by the
driver.
This patch increases the default setting of max_cqes from 0x2FFFF
(196607) to 0x2FFFFF(3145727), which is sufficient to cover the
maximum number needed by the ib_write_bw test (2097152). The default
setting of max_qps is also increased from 16384 to 32768 to allow
the test to run successfully with 16383 or 16384 QPs.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jianxin Xiong <jianxin.xiong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/verbs.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/verbs.c b/drivers/infiniband/hw/hfi1/verbs.c
index 0a0e93e..1f19334 100644
--- a/drivers/infiniband/hw/hfi1/verbs.c
+++ b/drivers/infiniband/hw/hfi1/verbs.c
@@ -76,7 +76,7 @@ static unsigned int hfi1_max_ahs = 0xFFFF;
module_param_named(max_ahs, hfi1_max_ahs, uint, S_IRUGO);
MODULE_PARM_DESC(max_ahs, "Maximum number of address handles to support");
-unsigned int hfi1_max_cqes = 0x2FFFF;
+unsigned int hfi1_max_cqes = 0x2FFFFF;
module_param_named(max_cqes, hfi1_max_cqes, uint, S_IRUGO);
MODULE_PARM_DESC(max_cqes,
"Maximum number of completion queue entries to support");
@@ -89,7 +89,7 @@ unsigned int hfi1_max_qp_wrs = 0x3FFF;
module_param_named(max_qp_wrs, hfi1_max_qp_wrs, uint, S_IRUGO);
MODULE_PARM_DESC(max_qp_wrs, "Maximum number of QP WRs to support");
-unsigned int hfi1_max_qps = 16384;
+unsigned int hfi1_max_qps = 32768;
module_param_named(max_qps, hfi1_max_qps, uint, S_IRUGO);
MODULE_PARM_DESC(max_qps, "Maximum number of QPs to support");
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-09-25 14:41 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-25 14:40 [PATCH 00/13] IB/hfi1,qib: Round 2 of hfi1/qib fixes for 4.9 Dennis Dalessandro
[not found] ` <20160925143656.10261.85231.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-09-25 14:40 ` [PATCH 01/13] IB/hfi1: Consolidate pio control masks into single definition Dennis Dalessandro
2016-09-25 14:41 ` [PATCH 02/13] IB/qib: Remove qpt_mask global Dennis Dalessandro
2016-09-25 14:41 ` [PATCH 03/13] IB/hfi1: Remove filtering of Set(PkeyTable) in HFI SMA Dennis Dalessandro
2016-09-25 14:41 ` Dennis Dalessandro [this message]
2016-09-25 14:41 ` [PATCH 05/13] IB/hfi1: Extend i2c timeout Dennis Dalessandro
2016-09-25 14:41 ` [PATCH 06/13] IB/hfi1: Do not read more than a SGE length Dennis Dalessandro
2016-09-25 14:41 ` [PATCH 07/13] IB/hfi1: Combine shift copy and byte copy for SGE reads Dennis Dalessandro
2016-09-25 14:41 ` [PATCH 08/13] IB/hfi1: Fix defered ack race with qp destroy Dennis Dalessandro
2016-09-25 14:41 ` [PATCH 09/13] IB/hfi1: Act on external device timeout Dennis Dalessandro
2016-09-25 14:42 ` [PATCH 10/13] IB/hfi1: Adjust hardware buffering parameter Dennis Dalessandro
2016-09-25 14:42 ` [PATCH 11/13] IB/hfi1: Cleanup tasklet refs in comments Dennis Dalessandro
2016-09-25 14:42 ` [PATCH 12/13] IB/hfi1: Remove unused variable from devdata Dennis Dalessandro
2016-09-25 14:42 ` [PATCH 13/13] IB/hfi1: Fix resource release in context allocation Dennis Dalessandro
2016-10-02 13:29 ` [PATCH 00/13] IB/hfi1,qib: Round 2 of hfi1/qib fixes for 4.9 Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160925144116.10261.70434.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=jianxin.xiong-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox