From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Easwar Hariharan
<easwar.hariharan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 10/12] IB/hfi1: Clean up unused argument
Date: Mon, 17 Oct 2016 04:19:58 -0700 [thread overview]
Message-ID: <20161017111957.7934.68488.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20161017103326.7934.21558.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Easwar Hariharan <easwar.hariharan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
hfi1_pcie_ddinit takes the PCI device id as an argument but never
uses it. Clean it up.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Easwar Hariharan <easwar.hariharan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/chip.c | 2 +-
drivers/infiniband/hw/hfi1/hfi.h | 3 +--
drivers/infiniband/hw/hfi1/pcie.c | 3 +--
3 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index bf645e9..3371361 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -14449,7 +14449,7 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
* Any error printing is already done by the init code.
* On return, we have the chip mapped.
*/
- ret = hfi1_pcie_ddinit(dd, pdev, ent);
+ ret = hfi1_pcie_ddinit(dd, pdev);
if (ret < 0)
goto bail_free;
diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h
index 1453c5c..6f05f68 100644
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -1760,8 +1760,7 @@ int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len);
int hfi1_pcie_init(struct pci_dev *, const struct pci_device_id *);
void hfi1_pcie_cleanup(struct pci_dev *);
-int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *,
- const struct pci_device_id *);
+int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *);
void hfi1_pcie_ddcleanup(struct hfi1_devdata *);
void hfi1_pcie_flr(struct hfi1_devdata *);
int pcie_speeds(struct hfi1_devdata *);
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 89c68da..4ac8f33 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -157,8 +157,7 @@ void hfi1_pcie_cleanup(struct pci_dev *pdev)
* fields required to re-initialize after a chip reset, or for
* various other purposes
*/
-int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev,
- const struct pci_device_id *ent)
+int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev)
{
unsigned long len;
resource_size_t addr;
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-10-17 11:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 11:19 [PATCH 00/12] For 4.9 rc Dennis Dalessandro
[not found] ` <20161017103326.7934.21558.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-10-17 11:19 ` [PATCH 01/12] IB/rdmvat: Organize hot path calldowns into a single cacheline Dennis Dalessandro
2016-10-17 11:19 ` [PATCH 02/12] IB/hfi1: Optimize pio cachelines Dennis Dalessandro
2016-10-17 11:19 ` [PATCH 03/12] IB/hfi1: Fix an Oops on pci device force remove Dennis Dalessandro
[not found] ` <20161017111918.7934.72325.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-10-17 16:07 ` Jason Gunthorpe
[not found] ` <20161017160731.GA5679-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-10-19 18:01 ` Tadeusz Struk
2016-10-25 15:57 ` [PATCH v2 " Dennis Dalessandro
[not found] ` <20161025155754.4950.23412.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-10-25 16:48 ` Jason Gunthorpe
[not found] ` <20161025164851.GA28096-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-10-25 17:38 ` Tadeusz Struk
[not found] ` <7f4cbe0c-0c83-48b2-9901-4a5e27b306b4-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-25 18:03 ` Jason Gunthorpe
2016-10-17 11:19 ` [PATCH 04/12] IB/hfi1: Return ENODEV for unsupported PCI device ids Dennis Dalessandro
2016-10-17 11:19 ` [PATCH 05/12] IB/hfi1: Unify access to GUID entries Dennis Dalessandro
2016-10-17 11:19 ` [PATCH 06/12] IB/hfi1: Optimize devdata cachelines Dennis Dalessandro
2016-10-17 11:19 ` [PATCH 07/12] IB/hfi1: Fix a potential memory leak in hfi1_create_ctxts() Dennis Dalessandro
2016-10-17 11:19 ` [PATCH 08/12] IB/hfi1: Add active channel and backplane support for integrated devices Dennis Dalessandro
2016-10-17 11:19 ` [PATCH 09/12] IB/hfi1: Remove leftover snoop references Dennis Dalessandro
2016-10-17 11:19 ` Dennis Dalessandro [this message]
2016-10-17 11:20 ` [PATCH 11/12] IB/hfi1: Delete unused lock Dennis Dalessandro
2016-10-17 11:20 ` [PATCH 12/12] IB/hfi1: Fix rnr_timer addition Dennis Dalessandro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161017111957.7934.68488.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=easwar.hariharan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).