From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jakub Pawlak
<jakub.pawlak-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/7] IB/hfi1: Fix status error code for unsupported packets
Date: Tue, 25 Oct 2016 13:12:17 -0700 [thread overview]
Message-ID: <20161025201216.15765.19453.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20161025194241.15765.8903.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Jakub Pawlak <jakub.pawlak-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Set the status code BAD_L2 when unsupported type of packet
is received and dropped.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jakub Pawlak <jakub.pawlak-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/chip.h | 3 +++
drivers/infiniband/hw/hfi1/driver.c | 17 +++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/chip.h b/drivers/infiniband/hw/hfi1/chip.h
index 9234525..043fd21 100644
--- a/drivers/infiniband/hw/hfi1/chip.h
+++ b/drivers/infiniband/hw/hfi1/chip.h
@@ -320,6 +320,9 @@
/* DC_DC8051_CFG_MODE.GENERAL bits */
#define DISABLE_SELF_GUID_CHECK 0x2
+/* Bad L2 frame error code */
+#define BAD_L2_ERR 0x6
+
/*
* Eager buffer minimum and maximum sizes supported by the hardware.
* All power-of-two sizes in between are supported as well.
diff --git a/drivers/infiniband/hw/hfi1/driver.c b/drivers/infiniband/hw/hfi1/driver.c
index 6563e4d..dadd35e 100644
--- a/drivers/infiniband/hw/hfi1/driver.c
+++ b/drivers/infiniband/hw/hfi1/driver.c
@@ -1360,12 +1360,25 @@ int process_receive_ib(struct hfi1_packet *packet)
int process_receive_bypass(struct hfi1_packet *packet)
{
+ struct hfi1_devdata *dd = packet->rcd->dd;
+
if (unlikely(rhf_err_flags(packet->rhf)))
handle_eflags(packet);
- dd_dev_err(packet->rcd->dd,
+ dd_dev_err(dd,
"Bypass packets are not supported in normal operation. Dropping\n");
- incr_cntr64(&packet->rcd->dd->sw_rcv_bypass_packet_errors);
+ incr_cntr64(&dd->sw_rcv_bypass_packet_errors);
+ if (!(dd->err_info_rcvport.status_and_code & OPA_EI_STATUS_SMASK)) {
+ u64 *flits = packet->ebuf;
+
+ if (flits && !(packet->rhf & RHF_LEN_ERR)) {
+ dd->err_info_rcvport.packet_flit1 = flits[0];
+ dd->err_info_rcvport.packet_flit2 =
+ packet->tlen > sizeof(flits[0]) ? flits[1] : 0;
+ }
+ dd->err_info_rcvport.status_and_code |=
+ (OPA_EI_STATUS_SMASK | BAD_L2_ERR);
+ }
return RHF_RCV_CONTINUE;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-10-25 20:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-25 20:12 [PATCH 0/7] IB/hfi1: Another round of fixes Dennis Dalessandro
[not found] ` <20161025194241.15765.8903.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-10-25 20:12 ` [PATCH 1/7] IB/hfi1: Relocate rcvhdrcnt module parameter check Dennis Dalessandro
2016-10-25 20:12 ` Dennis Dalessandro [this message]
2016-10-25 20:12 ` [PATCH 3/7] IB/hfi1: Fix ECN processing in prescan_rxq Dennis Dalessandro
2016-10-25 20:12 ` [PATCH 4/7] IB/hfi1: Get rid of divide in pio buffer allocator Dennis Dalessandro
2016-10-25 20:12 ` [PATCH 5/7] IB/hfi1: Optimize pio_buf and send_context structs Dennis Dalessandro
2016-10-25 20:12 ` [PATCH 6/7] IB/hfi1: Prevent hardware counter names from being cut off Dennis Dalessandro
2016-10-25 20:12 ` [PATCH 7/7] IB/hfi1: Remove incorrect IS_ERR check Dennis Dalessandro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161025201216.15765.19453.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=jakub.pawlak-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).