From: Yuval Shaia <yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: Adit Ranadive <aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
Cc: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pv-drivers-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org,
jhansen-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org,
asarwade-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org,
georgezhang-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org,
bryantan-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH v6 12/16] IB/pvrdma: Add Queue Pair support
Date: Fri, 2 Dec 2016 12:35:43 +0200 [thread overview]
Message-ID: <20161202103542.GA3663@yuval-lap> (raw)
In-Reply-To: <6a643e92376856394d45638d80a90619d3abac37.1475458407.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
On Sun, Oct 02, 2016 at 07:10:32PM -0700, Adit Ranadive wrote:
+
> +/**
> + * pvrdma_create_qp - create queue pair
> + * @pd: protection domain
> + * @init_attr: queue pair attributes
> + * @udata: user data
> + *
> + * @return: the ib_qp pointer on success, otherwise returns an errno.
> + */
> +struct ib_qp *pvrdma_create_qp(struct ib_pd *pd,
> + struct ib_qp_init_attr *init_attr,
> + struct ib_udata *udata)
> +{
> + struct pvrdma_qp *qp = NULL;
> + struct pvrdma_dev *dev = to_vdev(pd->device);
> + union pvrdma_cmd_req req;
> + union pvrdma_cmd_resp rsp;
> + struct pvrdma_cmd_create_qp *cmd = &req.create_qp;
> + struct pvrdma_cmd_create_qp_resp *resp = &rsp.create_qp_resp;
> + struct pvrdma_create_qp ucmd;
> + unsigned long flags;
> + int ret;
> +
> + if (init_attr->create_flags) {
> + dev_warn(&dev->pdev->dev,
> + "invalid create queuepair flags %#x\n",
> + init_attr->create_flags);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (init_attr->qp_type != IB_QPT_RC &&
> + init_attr->qp_type != IB_QPT_UD &&
> + init_attr->qp_type != IB_QPT_GSI) {
> + dev_warn(&dev->pdev->dev, "queuepair type %d not supported\n",
> + init_attr->qp_type);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + if (!atomic_add_unless(&dev->num_qps, 1, dev->dsr->caps.max_qp))
> + return ERR_PTR(-ENOMEM);
> +
> + switch (init_attr->qp_type) {
> + case IB_QPT_GSI:
> + if (init_attr->port_num == 0 ||
> + init_attr->port_num > pd->device->phys_port_cnt ||
> + udata) {
> + dev_warn(&dev->pdev->dev, "invalid queuepair attrs\n");
> + ret = -EINVAL;
> + goto err_qp;
> + }
> + /* fall through */
> + case IB_QPT_RC:
> + case IB_QPT_UD:
> + qp = kzalloc(sizeof(*qp), GFP_KERNEL);
> + if (!qp) {
> + ret = -ENOMEM;
> + goto err_qp;
> + }
> +
> + spin_lock_init(&qp->sq.lock);
> + spin_lock_init(&qp->rq.lock);
> + mutex_init(&qp->mutex);
> + atomic_set(&qp->refcnt, 1);
> + init_waitqueue_head(&qp->wait);
> +
> + qp->state = IB_QPS_RESET;
> +
> + if (pd->uobject && udata) {
> + dev_dbg(&dev->pdev->dev,
> + "create queuepair from user space\n");
> +
> + if (ib_copy_from_udata(&ucmd, udata, sizeof(ucmd))) {
> + ret = -EFAULT;
> + goto err_qp;
> + }
> +
> + /* set qp->sq.wqe_cnt, shift, buf_size.. */
> + qp->rumem = ib_umem_get(pd->uobject->context,
> + ucmd.rbuf_addr,
> + ucmd.rbuf_size, 0, 0);
> + if (IS_ERR(qp->rumem)) {
> + ret = PTR_ERR(qp->rumem);
> + goto err_qp;
> + }
> +
> + qp->sumem = ib_umem_get(pd->uobject->context,
> + ucmd.sbuf_addr,
> + ucmd.sbuf_size, 0, 0);
> + if (IS_ERR(qp->sumem)) {
> + ib_umem_release(qp->rumem);
> + ret = PTR_ERR(qp->sumem);
> + goto err_qp;
> + }
> +
> + qp->npages_send = ib_umem_page_count(qp->sumem);
> + qp->npages_recv = ib_umem_page_count(qp->rumem);
> + qp->npages = qp->npages_send + qp->npages_recv;
> + } else {
> + qp->is_kernel = true;
> +
> + ret = pvrdma_set_sq_size(to_vdev(pd->device),
> + &init_attr->cap,
> + init_attr->qp_type, qp);
> + if (ret)
> + goto err_qp;
> +
> + ret = pvrdma_set_rq_size(to_vdev(pd->device),
> + &init_attr->cap, qp);
> + if (ret)
> + goto err_qp;
> +
> + qp->npages = qp->npages_send + qp->npages_recv;
> +
> + /* Skip header page. */
> + qp->sq.offset = PAGE_SIZE;
> +
> + /* Recv queue pages are after send pages. */
> + qp->rq.offset = qp->npages_send * PAGE_SIZE;
> + }
> +
> + if (qp->npages < 0 || qp->npages > PVRDMA_PAGE_DIR_MAX_PAGES) {
> + dev_warn(&dev->pdev->dev,
> + "overflow pages in queuepair\n");
> + ret = -EINVAL;
> + goto err_umem;
> + }
> +
> + ret = pvrdma_page_dir_init(dev, &qp->pdir, qp->npages,
> + qp->is_kernel);
> + if (ret) {
> + dev_warn(&dev->pdev->dev,
> + "could not allocate page directory\n");
> + goto err_umem;
> + }
> +
> + if (!qp->is_kernel) {
> + pvrdma_page_dir_insert_umem(&qp->pdir, qp->sumem, 0);
> + pvrdma_page_dir_insert_umem(&qp->pdir, qp->rumem,
> + qp->npages_send);
> + } else {
> + /* Ring state is always the first page. */
> + qp->sq.ring = qp->pdir.pages[0];
> + qp->rq.ring = &qp->sq.ring[1];
> + }
> + break;
> + default:
> + ret = -EINVAL;
> + goto err_qp;
> + }
> +
> + /* Not supported */
> + init_attr->cap.max_inline_data = 0;
> +
> + memset(cmd, 0, sizeof(*cmd));
> + cmd->hdr.cmd = PVRDMA_CMD_CREATE_QP;
> + cmd->pd_handle = to_vpd(pd)->pd_handle;
> + cmd->send_cq_handle = to_vcq(init_attr->send_cq)->cq_handle;
> + cmd->recv_cq_handle = to_vcq(init_attr->recv_cq)->cq_handle;
> + cmd->max_send_wr = init_attr->cap.max_send_wr;
> + cmd->max_recv_wr = init_attr->cap.max_recv_wr;
> + cmd->max_send_sge = init_attr->cap.max_send_sge;
> + cmd->max_recv_sge = init_attr->cap.max_recv_sge;
> + cmd->max_inline_data = init_attr->cap.max_inline_data;
> + cmd->sq_sig_all = (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR) ? 1 : 0;
> + cmd->qp_type = ib_qp_type_to_pvrdma(init_attr->qp_type);
> + cmd->access_flags = IB_ACCESS_LOCAL_WRITE;
> + cmd->total_chunks = qp->npages;
> + cmd->send_chunks = qp->npages_send - 1;
> + cmd->pdir_dma = qp->pdir.dir_dma;
> +
> + dev_dbg(&dev->pdev->dev, "create queuepair with %d, %d, %d, %d\n",
> + cmd->max_send_wr, cmd->max_recv_wr, cmd->max_send_sge,
> + cmd->max_recv_sge);
> +
> + ret = pvrdma_cmd_post(dev, &req, &rsp, PVRDMA_CMD_CREATE_QP_RESP);
Warning: rsp is not in use so either use NULL or actually check response.
> + if (ret < 0) {
> + dev_warn(&dev->pdev->dev,
> + "could not create queuepair, error: %d\n", ret);
> + goto err_pdir;
> + }
> +
> + /* max_send_wr/_recv_wr/_send_sge/_recv_sge/_inline_data */
> + qp->qp_handle = resp->qpn;
> + qp->port = init_attr->port_num;
> + qp->ibqp.qp_num = resp->qpn;
> + spin_lock_irqsave(&dev->qp_tbl_lock, flags);
> + dev->qp_tbl[qp->qp_handle % dev->dsr->caps.max_qp] = qp;
> + spin_unlock_irqrestore(&dev->qp_tbl_lock, flags);
> +
> + return &qp->ibqp;
> +
> +err_pdir:
> + pvrdma_page_dir_cleanup(dev, &qp->pdir);
> +err_umem:
> + if (pd->uobject && udata) {
> + if (qp->rumem)
> + ib_umem_release(qp->rumem);
> + if (qp->sumem)
> + ib_umem_release(qp->sumem);
> + }
> +err_qp:
> + kfree(qp);
> + atomic_dec(&dev->num_qps);
> +
> + return ERR_PTR(ret);
> +}
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-12-02 10:35 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-03 2:10 [PATCH v6 00/16] Add Paravirtual RDMA Driver Adit Ranadive
[not found] ` <cover.1475458407.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2016-10-03 2:10 ` [PATCH v6 01/16] vmxnet3: Move PCI Id to pci_ids.h Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 02/16] IB/pvrdma: Add user-level shared functions Adit Ranadive
[not found] ` <515c704574423b16feb4c3d97847156623a8d042.1475458407.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2016-10-05 13:42 ` Leon Romanovsky
[not found] ` <20161005134254.GH9282-2ukJVAZIZ/Y@public.gmane.org>
2016-10-05 17:43 ` Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 03/16] IB/pvrdma: Add functions for ring traversal Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 04/16] IB/pvrdma: Add the paravirtual RDMA device specification Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 05/16] IB/pvrdma: Add functions for Verbs support Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 06/16] IB/pvrdma: Add paravirtual rdma device Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 07/16] IB/pvrdma: Add helper functions Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 08/16] IB/pvrdma: Add device command support Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 09/16] IB/pvrdma: Add support for Completion Queues Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 10/16] IB/pvrdma: Add UAR support Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 11/16] IB/pvrdma: Add support for memory regions Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 12/16] IB/pvrdma: Add Queue Pair support Adit Ranadive
[not found] ` <6a643e92376856394d45638d80a90619d3abac37.1475458407.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2016-11-14 11:34 ` Yuval Shaia
[not found] ` <20161114113403.GA11338-Hxa29pjIrERMGUUWBy6pNA@public.gmane.org>
2016-12-02 15:37 ` Adit Ranadive
2016-11-21 15:51 ` Yuval Shaia
2016-12-02 15:18 ` Adit Ranadive
2016-12-02 10:35 ` Yuval Shaia [this message]
2016-12-02 13:43 ` Yuval Shaia
2016-12-02 13:07 ` Yuval Shaia
2016-12-02 14:36 ` Adit Ranadive
2016-12-05 17:25 ` Yuval Shaia
2016-12-05 21:21 ` Adit Ranadive
[not found] ` <76188e1e-9b9b-07d6-febd-41827a049837-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2016-12-06 8:00 ` Yuval Shaia
2016-12-11 21:13 ` Yuval Shaia
2016-10-03 2:10 ` [PATCH v6 13/16] IB/pvrdma: Add the main driver module for PVRDMA Adit Ranadive
[not found] ` <d52d003f8befeb883a05b5234a90e7d6430218f2.1475458407.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2016-12-08 12:23 ` Yuval Shaia
2016-12-29 22:31 ` Adit Ranadive
[not found] ` <eb847a54-6319-66a8-3703-bf942cb29084-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2017-01-02 8:50 ` Yuval Shaia
2016-10-03 2:10 ` [PATCH v6 14/16] IB/pvrdma: Add Kconfig and Makefile Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 15/16] IB: Add PVRDMA driver Adit Ranadive
2016-10-03 2:10 ` [PATCH v6 16/16] MAINTAINERS: Update for " Adit Ranadive
2016-10-05 13:44 ` [PATCH v6 00/16] Add Paravirtual RDMA Driver Leon Romanovsky
[not found] ` <20161005134421.GI9282-2ukJVAZIZ/Y@public.gmane.org>
2016-10-21 17:49 ` Adit Ranadive
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161202103542.GA3663@yuval-lap \
--to=yuval.shaia-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
--cc=asarwade-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
--cc=bryantan-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=georgezhang-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
--cc=jhansen-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pv-drivers-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).