From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mike Marciniszyn
<mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Sebastian Sanchez
<sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 16/23] IB/hfi1: Use reference count wrapper for MRs
Date: Wed, 07 Dec 2016 19:33:53 -0800 [thread overview]
Message-ID: <20161208033351.21135.25392.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20161208032312.21135.66056.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Sebastian Sanchez <sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Some parts of the code don't use the standard driver
wrapper for memory region reference counters. Use the
standard driver wrapper throughout the code.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/sw/rdmavt/mr.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/sw/rdmavt/mr.c b/drivers/infiniband/sw/rdmavt/mr.c
index 562cf78..52fd152 100644
--- a/drivers/infiniband/sw/rdmavt/mr.c
+++ b/drivers/infiniband/sw/rdmavt/mr.c
@@ -793,7 +793,7 @@ int rvt_lkey_ok(struct rvt_lkey_table *rkt, struct rvt_pd *pd,
mr = rcu_dereference(dev->dma_mr);
if (!mr)
goto bail;
- atomic_inc(&mr->refcount);
+ rvt_get_mr(mr);
rcu_read_unlock();
isge->mr = mr;
@@ -814,7 +814,7 @@ int rvt_lkey_ok(struct rvt_lkey_table *rkt, struct rvt_pd *pd,
off + sge->length > mr->length ||
(mr->access_flags & acc) != acc))
goto bail;
- atomic_inc(&mr->refcount);
+ rvt_get_mr(mr);
rcu_read_unlock();
off += mr->offset;
@@ -892,7 +892,7 @@ int rvt_rkey_ok(struct rvt_qp *qp, struct rvt_sge *sge,
mr = rcu_dereference(rdi->dma_mr);
if (!mr)
goto bail;
- atomic_inc(&mr->refcount);
+ rvt_get_mr(mr);
rcu_read_unlock();
sge->mr = mr;
@@ -913,7 +913,7 @@ int rvt_rkey_ok(struct rvt_qp *qp, struct rvt_sge *sge,
if (unlikely(vaddr < mr->iova || off + len > mr->length ||
(mr->access_flags & acc) == 0))
goto bail;
- atomic_inc(&mr->refcount);
+ rvt_get_mr(mr);
rcu_read_unlock();
off += mr->offset;
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-12-08 3:33 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-08 3:32 [PATCH 00/23] IB/hfi1,qib,rdmavt: Patches for 4.10 Dennis Dalessandro
[not found] ` <20161208032312.21135.66056.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-12-08 3:32 ` [PATCH 01/23] IB/hfi1: Read new EPROM format Dennis Dalessandro
2016-12-08 3:32 ` [PATCH 02/23] IB/hfi1: Fix dc8051 multiple qword memory reads Dennis Dalessandro
2016-12-08 3:32 ` [PATCH 03/23] IB/hfi1: Use non-atomic __test_and_clear_bit in hot path Dennis Dalessandro
2016-12-08 3:32 ` [PATCH 04/23] IB/hfi1: Export 8051 memory and LCB registers via debugfs Dennis Dalessandro
2016-12-08 3:32 ` [PATCH 05/23] IB/hfi1: Disable header suppression for short packets Dennis Dalessandro
2016-12-08 3:32 ` [PATCH 06/23] IB/rdmavt: Fix trace hierarchy Dennis Dalessandro
2016-12-08 3:32 ` [PATCH 07/23] IB/hfi1: Show statistics counters under IB stats interface Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 08/23] IB/hfi1: Remove dependence on qp->s_cur_size Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 09/23] IB/hfi1: Remove definition of unused hfi1_affinity struct Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 10/23] IB/hfi1: Add special setting for low power AOC Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 11/23] IB/rdmavt: Add trace of MR segs Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 12/23] IB/hfi1: Remove usage of qp->s_cur_sge Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 13/23] IB/hfi1: Remove critical section gap in sc_buffer_alloc() Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 14/23] IB/hfi1: Preserve external device completed bit Dennis Dalessandro
2016-12-08 3:33 ` [PATCH 15/23] IB/hfi1: Replace qp->refcount release code with standard driver wrapper Dennis Dalessandro
2016-12-08 3:33 ` Dennis Dalessandro [this message]
2016-12-08 3:34 ` [PATCH 17/23] IB/qib: Use standard refcount wrapper for QPs Dennis Dalessandro
2016-12-08 3:34 ` [PATCH 18/23] IB/rdmavt: Add a send completion helper Dennis Dalessandro
2016-12-08 3:34 ` [PATCH 19/23] IB/hfi1,IB/qib: Use new " Dennis Dalessandro
2016-12-08 3:34 ` [PATCH 20/23] IB/hfi1: Avoid credit return allocation for cpu-less NUMA nodes Dennis Dalessandro
2016-12-08 3:34 ` [PATCH 21/23] IB/rdmavt: Add swqe mr deref helper Dennis Dalessandro
2016-12-08 3:34 ` [PATCH 22/23] IB/hfi1,IB/qib: use rvt " Dennis Dalessandro
2016-12-08 3:34 ` [PATCH 23/23] IB/rdmavt, IB/hfi1, IB/qib: Add inlines for mtu division Dennis Dalessandro
2016-12-12 20:18 ` [PATCH 00/23] IB/hfi1,qib,rdmavt: Patches for 4.10 Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161208033351.21135.25392.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=sebastian.sanchez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox