From: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Moni Shoua <monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Subject: [PATCH rdma-next] IB/cma: Allow port reuse for rdma_id
Date: Thu, 5 Jan 2017 16:16:36 +0200 [thread overview]
Message-ID: <20170105141636.23284-2-leon@kernel.org> (raw)
In-Reply-To: <20170105141636.23284-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
From: Moni Shoua <monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
When allocating a port number for binding to a rdma_id, assuming the
allocation is not for a specific port, the rule is to allow only ports
that were not in use before by any other rdma_id.
This condition is too strong to achieve the goal of a unique 5 tuple
rdma_id. Instead, we can compare current rdma_id with other rdma_id for
difference in one of destination port, source address and destination
address to allow port reuse.
Signed-off-by: Moni Shoua <monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Signed-off-by: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
drivers/infiniband/core/cma.c | 67 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 60 insertions(+), 7 deletions(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 847c5ad..bd8d051 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2843,20 +2843,26 @@ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
int ret;
id_priv = container_of(id, struct rdma_id_private, id);
+ memcpy(cma_dst_addr(id_priv), dst_addr, rdma_addr_size(dst_addr));
if (id_priv->state == RDMA_CM_IDLE) {
ret = cma_bind_addr(id, src_addr, dst_addr);
- if (ret)
+ if (ret) {
+ memset(cma_dst_addr(id_priv), 0, rdma_addr_size(dst_addr));
return ret;
+ }
}
- if (cma_family(id_priv) != dst_addr->sa_family)
+ if (cma_family(id_priv) != dst_addr->sa_family) {
+ memset(cma_dst_addr(id_priv), 0, rdma_addr_size(dst_addr));
return -EINVAL;
+ }
- if (!cma_comp_exch(id_priv, RDMA_CM_ADDR_BOUND, RDMA_CM_ADDR_QUERY))
+ if (!cma_comp_exch(id_priv, RDMA_CM_ADDR_BOUND, RDMA_CM_ADDR_QUERY)) {
+ memset(cma_dst_addr(id_priv), 0, rdma_addr_size(dst_addr));
return -EINVAL;
+ }
atomic_inc(&id_priv->refcount);
- memcpy(cma_dst_addr(id_priv), dst_addr, rdma_addr_size(dst_addr));
if (cma_any_addr(dst_addr)) {
ret = cma_resolve_loopback(id_priv);
} else {
@@ -2972,6 +2978,43 @@ static int cma_alloc_port(enum rdma_port_space ps,
return ret == -ENOSPC ? -EADDRNOTAVAIL : ret;
}
+static int cma_port_is_unique(struct rdma_bind_list *bind_list,
+ struct rdma_id_private *id_priv)
+{
+ struct rdma_id_private *cur_id;
+ struct sockaddr *daddr = cma_dst_addr(id_priv);
+ struct sockaddr *saddr = cma_src_addr(id_priv);
+ __be16 dport = cma_port(daddr);
+
+ hlist_for_each_entry(cur_id, &bind_list->owners, node) {
+ struct sockaddr *cur_daddr = cma_dst_addr(cur_id);
+ struct sockaddr *cur_saddr = cma_src_addr(cur_id);
+ __be16 cur_dport = cma_port(cur_daddr);
+
+ if (id_priv == cur_id)
+ continue;
+
+ /* different dest port -> unique */
+ if (!cma_any_port(cur_daddr) &&
+ (dport != cur_dport))
+ continue;
+
+ /* different src address -> unique */
+ if (!cma_any_addr(saddr) &&
+ !cma_any_addr(cur_saddr) &&
+ cma_addr_cmp(saddr, cur_saddr))
+ continue;
+
+ /* different dst address -> unique */
+ if (!cma_any_addr(cur_daddr) &&
+ cma_addr_cmp(daddr, cur_daddr))
+ continue;
+
+ return -EADDRNOTAVAIL;
+ }
+ return 0;
+}
+
static int cma_alloc_any_port(enum rdma_port_space ps,
struct rdma_id_private *id_priv)
{
@@ -2984,9 +3027,19 @@ static int cma_alloc_any_port(enum rdma_port_space ps,
remaining = (high - low) + 1;
rover = prandom_u32() % remaining + low;
retry:
- if (last_used_port != rover &&
- !cma_ps_find(net, ps, (unsigned short)rover)) {
- int ret = cma_alloc_port(ps, id_priv, rover);
+ if (last_used_port != rover) {
+ struct rdma_bind_list *bind_list;
+ int ret;
+
+ bind_list = cma_ps_find(net, ps, (unsigned short)rover);
+
+ if (!bind_list) {
+ ret = cma_alloc_port(ps, id_priv, rover);
+ } else {
+ ret = cma_port_is_unique(bind_list, id_priv);
+ if (!ret)
+ cma_bind_port(bind_list, id_priv);
+ }
/*
* Remember previously used port number in order to avoid
* re-using same port immediately after it is closed.
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-01-05 14:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-05 14:16 [PATCH rdma-next] IB/cma: Add debug messages to error flows Leon Romanovsky
[not found] ` <20170105141636.23284-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-01-05 14:16 ` Leon Romanovsky [this message]
[not found] ` <20170105141636.23284-2-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-01-05 18:40 ` [PATCH rdma-next] IB/cma: Allow port reuse for rdma_id Hefty, Sean
[not found] ` <1828884A29C6694DAF28B7E6B8A82373AB0D7F68-P5GAC/sN6hkd3b2yrw5b5LfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2017-01-05 19:33 ` Leon Romanovsky
2017-01-24 21:32 ` Doug Ledford
2017-01-24 21:32 ` [PATCH rdma-next] IB/cma: Add debug messages to error flows Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170105141636.23284-2-leon@kernel.org \
--to=leon-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).