[PATCH rdma-core 2/2] travis: Upload assets to github release

[Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

Create and upload library source code to the corresponding release.

The upload is triggered for pushed tags which are expected to be
in semantic version format, e.g. v12.7.0.

Signed-off-by: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Sorry for the churn, it was created by "travis setup release" command.
---
 .travis.yml              |  63 ++++++++++++++---------------
 Documentation/release.md | 100 +++++++++++++++++++++++++++++++++++++++++++++++
 buildlib/github-release  |   8 ++++
 3 files changed, 140 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/release.md
 create mode 100755 buildlib/github-release

diff --git a/.travis.yml b/.travis.yml
index c4fa1985..e4d1b983 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -1,39 +1,40 @@
 language: c
-# We need at least cmake 2.12, this means we need to use trusty.
-# Precise's glibc, etc predates what we are willing to support.
-# sudo is required to get the trusty image, and at present to enable llvm 3.9
 sudo: required
 dist: trusty
 addons:
-  # We run our builds sequentially in one VM rather than try and use the
-  # matrix feature. This is because Travis is unreasonably inefficient
-  # doing this APT setup pass.
   apt:
     sources:
-      # sourceline because travis won't white list trusty builds, and hasn't
-      # whitelisted 3.9
-      - sourceline: "deb http://apt.llvm.org/trusty/ llvm-toolchain-trusty-3.9 main"
-        key_url: "http://apt.llvm.org/llvm-snapshot.gpg.key"
-      - ubuntu-toolchain-r-test
+    - sourceline: deb http://apt.llvm.org/trusty/ llvm-toolchain-trusty-3.9 main
+      key_url: http://apt.llvm.org/llvm-snapshot.gpg.key
+    - ubuntu-toolchain-r-test
     packages:
-      - build-essential
-      - clang-3.9
-      - cmake
-      - debhelper
-      - gcc
-      - gcc-6
-      - libnl-3-dev
-      - libnl-route-3-dev
-      - libudev-dev
-      - make
-      - ninja-build
-      - pkg-config
-      - python
-      - valgrind
-
-      # 32 bit support packages
-      - gcc-multilib
-      - lib32gcc-6-dev
-
+    - build-essential
+    - clang-3.9
+    - cmake
+    - debhelper
+    - gcc
+    - gcc-6
+    - libnl-3-dev
+    - libnl-route-3-dev
+    - libudev-dev
+    - make
+    - ninja-build
+    - pkg-config
+    - python
+    - valgrind
+    - gcc-multilib
+    - lib32gcc-6-dev
 script:
-  - buildlib/travis-build
+- buildlib/travis-build
+before_deploy:
+- buildlib/github-release
+deploy:
+  provider: releases
+  api_key:
+    secure: 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
+  file: rdma-core-*.tar.gz
+  file_glob: true
+  skip_cleanup: true
+  on:
+    repo: linux-rdma/rdma-core
+    tags: true
diff --git a/Documentation/release.md b/Documentation/release.md
new file mode 100644
index 00000000..e0f0e814
--- /dev/null
+++ b/Documentation/release.md
@@ -0,0 +1,100 @@
+# Release Process
+
+Release process of rdma-core library consists from three stages
+
+1. Change library version, according to [Overall Pacakge Version](versioning.md) guide.
+2. Push the change above to master branch and ensure that Travis CI reports successful build.
+3. Create local annotated signed tag vX.X.X (`git tag vX.X.X -a -s`).
+4. Issue `git release` command which will push tag, trigger Travis CI to upload
+   release tar.gz file and create release notes based on tag context with release notes in it.
+
+## git release
+
+There are many implmentations of different `git release` commands. We recommend you to use
+the command from [this](https://github.com/mpalmer/github-release) repository due to its simplicity.
+
+---
+Copy&Paste from relevant [README](https://github.com/mpalmer/github-release/blob/master/README.md)
+
+---
+
+This very simple gem provides a `git release` command, which will
+automatically fill out any and all "release tags" into fully-blown "Github
+Releases", complete with release notes, a heading, and all the other good
+things in life.
+
+Using this gem, you can turn the following tag annotation:
+
+    First Release
+
+    It is with much fanfare and blowing of horns that I bequeath the
+    awesomeness of `git release` upon the world.
+
+    Features in this release include:
+
+     * Ability to create a release from a tag annotation or commit message;
+     * Automatically generates an OAuth token if needed;
+     * Feeds your cat while you're hacking(*)
+
+    You should install it now!  `gem install github-release`
+
+Into [this](https://github.com/mpalmer/github-release/releases/tag/v0.1.0)
+simply by running
+
+    git release
+
+
+### Installation
+
+Simply install the gem:
+
+    gem install github-release
+
+
+### Usage
+
+Using `git release` is very simple.  Just make sure that your `origin`
+remote points to your Github repo, and then run `git release`.  All tags
+that look like a "version tag" (see "Configuration", below) will be created
+as Github releases (if they don't already exist) and the message from the
+tag will be used as the release notes.
+
+The format of the release notes is quite straightforward -- the first line
+of the message associated with the commit will be used as the "name" of the
+release, with the rest of the message used as the "body" of the release.
+The body will be interpreted as Github-flavoured markdown, so if you'd like
+to get fancy, go for your life.
+
+The message associated with the "release tag" is either the tag's annotation
+message (if it is an annotated tag) or else the commit log of the commit on
+which the tag is placed.  I *strongly* recommend annotated tags (but then
+again, [I'm biased...](http://theshed.hezmatt.org/git-version-bump))
+
+The first time you use `git release`, it will ask you for your Github
+username and password.  This is used to request an OAuth token to talk to
+the Github API, which is then stored in your global git config.  Hence you
+*shouldn't* be asked for your credentials every time you use `git release`.
+If you need to use multiple github accounts for different repos, you can
+override the `release.api-token` config parameter in your repo configuration
+(but you'll have to get your own OAuth token).
+
+
+### Configuration
+
+There are a few things you can configure to make `git release` work slightly
+differently.  None of them should be required for normal, sane use.
+
+ * `release.remote` (default `origin`) -- The name of the remote which is
+   used to determine what github repository to send release notes to.
+
+ * `release.api-token` (default is runtime generated) -- The OAuth token
+   to use to authenticate access to the Github API.  When you first run `git
+   release`, you'll be prompted for a username and password to use to
+   generate an initial token; if you need to override it on a per-repo
+   basis, this is the key you'll use.
+
+ * `release.tag-regex` (default `v\d+\.\d+(\.\d+)?$`) -- The regular
+   expression to filter which tags denote releases, as opposed to other tags
+   you might have decided to make.  Only tags which match this regular
+   expression will be pushed up by `git release`, and only those tags will
+   be marked as releases.
diff --git a/buildlib/github-release b/buildlib/github-release
new file mode 100755
index 00000000..4c0ffda2
--- /dev/null
+++ b/buildlib/github-release
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+set -e
+
+if [[ $TRAVIS_TAG == v* ]] && [ "$TRAVIS_OS_NAME" = "linux" ]; then
+	# Let's create release for vX tags only.
+	git archive --prefix rdma-core/ --output rdma-core-$TRAVIS_TAG.tar.gz HEAD
+fi
--
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html