From: Yuval Shaia <yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: Moni Shoua <monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Sean Hefty <sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Hal Rosenstock
<hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
selvin.xavier-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
devesh.sharma-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
Somnath Kotur
<somnath.kotur-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
sriharsha.basavapatna-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
benve-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org,
dgoodell-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org,
Leon Romanovsky <leonro-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
"Weiny, Ira" <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
sagi-TmH2Wj2nsNJBDLzU/O5InQ@public.gmane.org,
dasaratharaman.chandramouli-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
Yishai Hadas <yishaih-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
Bart Van Assche
<bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>,
linux-rdma <linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v2] IB/core: Add generic function to extract IB speed from netdev
Date: Thu, 8 Jun 2017 18:03:47 +0300 [thread overview]
Message-ID: <20170608150346.GA12171@yuvallap> (raw)
In-Reply-To: <CAG9sBKMqZK+WaDFYMdz5coCM_F_E4bAVuww1VTr-b+maHdzz=A@mail.gmail.com>
On Thu, Jun 08, 2017 at 05:21:50PM +0300, Moni Shoua wrote:
> On Thu, Jun 8, 2017 at 4:56 PM, Yuval Shaia <yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote:
> > Logic of retrieving netdev speed from net_device and translating it to IB
> > speed is implemented in rxe, in usnic and in bnxt drivers.
> >
> > Define new function which merges all.
> >
> > Signed-off-by: Yuval Shaia <yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
> > ---
> > v0 -> v1:
> > * Invite usnic to the party.
> > v1 -> v2:
> > * Utilize __ethtool_get_link_ksettings
> > * Rename to ib_get_eth_speed
> > * Add some validation checks
> > * Implement get_netdev in usnic
> > ---
> > drivers/infiniband/core/verbs.c | 55 ++++++++++++++++++++++++++++
> > drivers/infiniband/hw/bnxt_re/ib_verbs.c | 49 ++-----------------------
> > drivers/infiniband/hw/usnic/usnic_ib_main.c | 1 +
> > drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 43 +++++++++-------------
> > drivers/infiniband/hw/usnic/usnic_ib_verbs.h | 1 +
> > drivers/infiniband/sw/rxe/rxe_verbs.c | 53 +++------------------------
> > include/rdma/ib_verbs.h | 1 +
> > 7 files changed, 85 insertions(+), 118 deletions(-)
> >
> > diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
> > index 4792f52..19e6b78 100644
> > --- a/drivers/infiniband/core/verbs.c
> > +++ b/drivers/infiniband/core/verbs.c
> > @@ -1253,6 +1253,61 @@ int ib_resolve_eth_dmac(struct ib_device *device,
> > }
> > EXPORT_SYMBOL(ib_resolve_eth_dmac);
> >
> > +int ib_get_eth_speed(struct ib_device *dev, u8 port_num, u8 *speed, u8 *width)
> > +{
> > + int rc;
> > + u32 netdev_speed;
> > + struct net_device *netdev;
> > + struct ethtool_link_ksettings lksettings;
> > +
> > + if (rdma_port_get_link_layer(dev, port_num) != IB_LINK_LAYER_ETHERNET)
> > + return -EINVAL;
> > +
> > + if (!dev->get_netdev)
> > + return -EINVAL;
> > +
> > + netdev = dev->get_netdev(dev, port_num);
> > + if (!netdev)
> > + return -EINVAL;
> > +
> > + rtnl_lock();
> > + rc = __ethtool_get_link_ksettings(netdev, &lksettings);
> > + rtnl_unlock();
> > +
> > + dev_put(netdev);
> > +
> > + if (!rc) {
> > + netdev_speed = lksettings.base.speed;
> > + } else {
> > + netdev_speed = SPEED_1000;
> > + pr_warn("%s speed is unknown, defaulting to %d\n", netdev->name,
> > + netdev_speed);
> Why did you drop the block that did ethtool_ops->get_settings(netdev, &cmd)?
The entire block was replaced by single call to
__ethtool_get_link_ksettings which take care of fall-backing to
ethtool_ops->get_settings.
> > + }
> > +
> > + if (netdev_speed <= SPEED_1000) {
> > + *width = IB_WIDTH_1X;
> > + *speed = IB_SPEED_SDR;
> > + } else if (netdev_speed <= SPEED_10000) {
> > + *width = IB_WIDTH_1X;
> > + *speed = IB_SPEED_FDR10;
> > + } else if (netdev_speed <= SPEED_20000) {
> > + *width = IB_WIDTH_4X;
> > + *speed = IB_SPEED_DDR;
> > + } else if (netdev_speed <= SPEED_25000) {
> > + *width = IB_WIDTH_1X;
> > + *speed = IB_SPEED_EDR;
> > + } else if (netdev_speed <= SPEED_40000) {
> > + *width = IB_WIDTH_4X;
> > + *speed = IB_SPEED_FDR10;
> > + } else {
> > + *width = IB_WIDTH_4X;
> > + *speed = IB_SPEED_EDR;
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(ib_get_eth_speed);
> > +
> > int ib_modify_qp(struct ib_qp *qp,
> > struct ib_qp_attr *qp_attr,
> > int qp_attr_mask)
> > diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
> > index 7ba9e69..d0e0f90 100644
> > --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
> > +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
> > @@ -181,50 +181,6 @@ int bnxt_re_modify_device(struct ib_device *ibdev,
> > return 0;
> > }
> >
> > -static void __to_ib_speed_width(struct net_device *netdev, u8 *speed, u8 *width)
> > -{
> > - struct ethtool_link_ksettings lksettings;
> > - u32 espeed;
> > -
> > - if (netdev->ethtool_ops && netdev->ethtool_ops->get_link_ksettings) {
> > - memset(&lksettings, 0, sizeof(lksettings));
> > - rtnl_lock();
> > - netdev->ethtool_ops->get_link_ksettings(netdev, &lksettings);
> > - rtnl_unlock();
> > - espeed = lksettings.base.speed;
> > - } else {
> > - espeed = SPEED_UNKNOWN;
> > - }
> > - switch (espeed) {
> > - case SPEED_1000:
> > - *speed = IB_SPEED_SDR;
> > - *width = IB_WIDTH_1X;
> > - break;
> > - case SPEED_10000:
> > - *speed = IB_SPEED_QDR;
> > - *width = IB_WIDTH_1X;
> > - break;
> > - case SPEED_20000:
> > - *speed = IB_SPEED_DDR;
> > - *width = IB_WIDTH_4X;
> > - break;
> > - case SPEED_25000:
> > - *speed = IB_SPEED_EDR;
> > - *width = IB_WIDTH_1X;
> > - break;
> > - case SPEED_40000:
> > - *speed = IB_SPEED_QDR;
> > - *width = IB_WIDTH_4X;
> > - break;
> > - case SPEED_50000:
> > - break;
> > - default:
> > - *speed = IB_SPEED_SDR;
> > - *width = IB_WIDTH_1X;
> > - break;
> > - }
> > -}
> > -
> > /* Port */
> > int bnxt_re_query_port(struct ib_device *ibdev, u8 port_num,
> > struct ib_port_attr *port_attr)
> > @@ -266,8 +222,9 @@ int bnxt_re_query_port(struct ib_device *ibdev, u8 port_num,
> > * IB stack to avoid race in the NETDEV_UNREG path
> > */
> > if (test_bit(BNXT_RE_FLAG_IBDEV_REGISTERED, &rdev->flags))
> > - __to_ib_speed_width(rdev->netdev, &port_attr->active_speed,
> > - &port_attr->active_width);
> > + if (!ib_get_eth_speed(ibdev, port_num, &port_attr->active_speed,
> > + &port_attr->active_width))
> > + return -EINVAL;
> > return 0;
> > }
> >
> > diff --git a/drivers/infiniband/hw/usnic/usnic_ib_main.c b/drivers/infiniband/hw/usnic/usnic_ib_main.c
> > index c0c1e8b..80577b9 100644
> > --- a/drivers/infiniband/hw/usnic/usnic_ib_main.c
> > +++ b/drivers/infiniband/hw/usnic/usnic_ib_main.c
> > @@ -409,6 +409,7 @@ static void *usnic_ib_device_add(struct pci_dev *dev)
> > us_ibdev->ib_dev.query_port = usnic_ib_query_port;
> > us_ibdev->ib_dev.query_pkey = usnic_ib_query_pkey;
> > us_ibdev->ib_dev.query_gid = usnic_ib_query_gid;
> > + us_ibdev->ib_dev.get_netdev = usnic_get_netdev;
> > us_ibdev->ib_dev.get_link_layer = usnic_ib_port_link_layer;
> > us_ibdev->ib_dev.alloc_pd = usnic_ib_alloc_pd;
> > us_ibdev->ib_dev.dealloc_pd = usnic_ib_dealloc_pd;
> > diff --git a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
> > index 4996984..a71aea5 100644
> > --- a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
> > +++ b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
> > @@ -226,27 +226,6 @@ static void qp_grp_destroy(struct usnic_ib_qp_grp *qp_grp)
> > spin_unlock(&vf->lock);
> > }
> >
> > -static void eth_speed_to_ib_speed(int speed, u8 *active_speed,
> > - u8 *active_width)
> > -{
> > - if (speed <= 10000) {
> > - *active_width = IB_WIDTH_1X;
> > - *active_speed = IB_SPEED_FDR10;
> > - } else if (speed <= 20000) {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_DDR;
> > - } else if (speed <= 30000) {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_QDR;
> > - } else if (speed <= 40000) {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_FDR10;
> > - } else {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_EDR;
> > - }
> > -}
> > -
> > static int create_qp_validate_user_data(struct usnic_ib_create_qp_cmd cmd)
> > {
> > if (cmd.spec.trans_type <= USNIC_TRANSPORT_UNKNOWN ||
> > @@ -326,12 +305,16 @@ int usnic_ib_query_port(struct ib_device *ibdev, u8 port,
> > struct ib_port_attr *props)
> > {
> > struct usnic_ib_dev *us_ibdev = to_usdev(ibdev);
> > - struct ethtool_link_ksettings cmd;
> >
> > usnic_dbg("\n");
> >
> > mutex_lock(&us_ibdev->usdev_lock);
> > - __ethtool_get_link_ksettings(us_ibdev->netdev, &cmd);
> > + if (!ib_get_eth_speed(ibdev, port, &props->active_speed,
> > + &props->active_width)) {
> > + mutex_unlock(&us_ibdev->usdev_lock);
> > + return -EINVAL;
> > + }
> > +
> > /* props being zeroed by the caller, avoid zeroing it here */
> >
> > props->lid = 0;
> > @@ -355,8 +338,6 @@ int usnic_ib_query_port(struct ib_device *ibdev, u8 port,
> > props->pkey_tbl_len = 1;
> > props->bad_pkey_cntr = 0;
> > props->qkey_viol_cntr = 0;
> > - eth_speed_to_ib_speed(cmd.base.speed, &props->active_speed,
> > - &props->active_width);
> > props->max_mtu = IB_MTU_4096;
> > props->active_mtu = iboe_get_mtu(us_ibdev->ufdev->mtu);
> > /* Userspace will adjust for hdrs */
> > @@ -424,6 +405,18 @@ int usnic_ib_query_gid(struct ib_device *ibdev, u8 port, int index,
> > return 0;
> > }
> >
> > +struct net_device *usnic_get_netdev(struct ib_device *device, u8 port_num)
> > +{
> > + struct usnic_ib_dev *us_ibdev = to_usdev(device);
> > +
> > + if (us_ibdev->netdev) {
> > + dev_hold(us_ibdev->netdev);
> > + return us_ibdev->netdev;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> I think that this belongs to a separate patch (you should split)
I see, make sense.
>
> > int usnic_ib_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
> > u16 *pkey)
> > {
> > diff --git a/drivers/infiniband/hw/usnic/usnic_ib_verbs.h b/drivers/infiniband/hw/usnic/usnic_ib_verbs.h
> > index 172e43b..1fda944 100644
> > --- a/drivers/infiniband/hw/usnic/usnic_ib_verbs.h
> > +++ b/drivers/infiniband/hw/usnic/usnic_ib_verbs.h
> > @@ -48,6 +48,7 @@ int usnic_ib_query_qp(struct ib_qp *qp, struct ib_qp_attr *qp_attr,
> > struct ib_qp_init_attr *qp_init_attr);
> > int usnic_ib_query_gid(struct ib_device *ibdev, u8 port, int index,
> > union ib_gid *gid);
> > +struct net_device *usnic_get_netdev(struct ib_device *device, u8 port_num);
> > int usnic_ib_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
> > u16 *pkey);
> > struct ib_pd *usnic_ib_alloc_pd(struct ib_device *ibdev,
> > diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
> > index 83d709e..4570f04 100644
> > --- a/drivers/infiniband/sw/rxe/rxe_verbs.c
> > +++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
> > @@ -51,40 +51,16 @@ static int rxe_query_device(struct ib_device *dev,
> > return 0;
> > }
> >
> > -static void rxe_eth_speed_to_ib_speed(int speed, u8 *active_speed,
> > - u8 *active_width)
> > -{
> > - if (speed <= 1000) {
> > - *active_width = IB_WIDTH_1X;
> > - *active_speed = IB_SPEED_SDR;
> > - } else if (speed <= 10000) {
> > - *active_width = IB_WIDTH_1X;
> > - *active_speed = IB_SPEED_FDR10;
> > - } else if (speed <= 20000) {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_DDR;
> > - } else if (speed <= 30000) {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_QDR;
> > - } else if (speed <= 40000) {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_FDR10;
> > - } else {
> > - *active_width = IB_WIDTH_4X;
> > - *active_speed = IB_SPEED_EDR;
> > - }
> > -}
> > -
> > static int rxe_query_port(struct ib_device *dev,
> > u8 port_num, struct ib_port_attr *attr)
> > {
> > struct rxe_dev *rxe = to_rdev(dev);
> > struct rxe_port *port;
> > - u32 speed;
> > + int rc = -EINVAL;
> >
> > if (unlikely(port_num != 1)) {
> > pr_warn("invalid port_number %d\n", port_num);
> > - goto err1;
> > + goto out;
> > }
> >
> > port = &rxe->port;
> > @@ -93,29 +69,12 @@ static int rxe_query_port(struct ib_device *dev,
> > *attr = port->attr;
> >
> > mutex_lock(&rxe->usdev_lock);
> > - if (rxe->ndev->ethtool_ops->get_link_ksettings) {
> > - struct ethtool_link_ksettings ks;
> > -
> > - rxe->ndev->ethtool_ops->get_link_ksettings(rxe->ndev, &ks);
> > - speed = ks.base.speed;
> > - } else if (rxe->ndev->ethtool_ops->get_settings) {
> > - struct ethtool_cmd cmd;
> > -
> > - rxe->ndev->ethtool_ops->get_settings(rxe->ndev, &cmd);
> > - speed = cmd.speed;
> > - } else {
> > - pr_warn("%s speed is unknown, defaulting to 1000\n",
> > - rxe->ndev->name);
> > - speed = 1000;
> > - }
> > - rxe_eth_speed_to_ib_speed(speed, &attr->active_speed,
> > - &attr->active_width);
> > + rc = ib_get_eth_speed(dev, port_num, &attr->active_speed,
> > + &attr->active_width);
> > mutex_unlock(&rxe->usdev_lock);
> >
> > - return 0;
> > -
> > -err1:
> > - return -EINVAL;
> > +out:
> > + return rc;
> > }
> >
> > static int rxe_query_gid(struct ib_device *device,
> > diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
> > index ba8314e..860cb30 100644
> > --- a/include/rdma/ib_verbs.h
> > +++ b/include/rdma/ib_verbs.h
> > @@ -3488,6 +3488,7 @@ void ib_drain_qp(struct ib_qp *qp);
> >
> > int ib_resolve_eth_dmac(struct ib_device *device,
> > struct rdma_ah_attr *ah_attr);
> > +int ib_get_eth_speed(struct ib_device *dev, u8 port_num, u8 *speed, u8 *width);
> >
> > static inline u8 *rdma_ah_retrieve_dmac(struct rdma_ah_attr *attr)
> > {
> > --
> > 2.9.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2017-06-08 15:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 13:56 [PATCH v2] IB/core: Add generic function to extract IB speed from netdev Yuval Shaia
[not found] ` <20170608135655.12079-1-yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2017-06-08 14:21 ` Moni Shoua
2017-06-08 15:03 ` Yuval Shaia [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170608150346.GA12171@yuvallap \
--to=yuval.shaia-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org \
--cc=benve-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
--cc=dasaratharaman.chandramouli-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=devesh.sharma-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=dgoodell-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=leonro-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=monis-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=sagi-TmH2Wj2nsNJBDLzU/O5InQ@public.gmane.org \
--cc=sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=selvin.xavier-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=somnath.kotur-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=sriharsha.basavapatna-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=yishaih-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox