From: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2 09/13] NFSv4.1: Use seqid returned by EXCHANGE_ID after state migration
Date: Thu, 08 Jun 2017 11:52:52 -0400 [thread overview]
Message-ID: <20170608155252.18945.61089.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20170608154339.18945.5500.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
When CONFIRMED_R is set, the client throws away the sequence ID
returned by the server. During a Transparent State Migration, however
there's no other way for the client to know what sequence ID to use
with a lease that's been migrated.
Therefore, the client must save and use the contrived slot sequence
value returned by the destination server even when CONFIRMED_R is
set.
Note that some servers always return a seqid of 1 after a migration.
Reported-by: Xuan Qi <xuan.qi-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Tested-by: Xuan Qi <xuan.qi-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
---
fs/nfs/nfs4proc.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index c08c46a..04dd718 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7375,12 +7375,11 @@ static void nfs4_exchange_id_done(struct rpc_task *task, void *data)
if (status == 0) {
clp->cl_clientid = cdata->res.clientid;
clp->cl_exchange_flags = cdata->res.flags;
+ clp->cl_seqid = cdata->res.seqid;
/* Client ID is not confirmed */
- if (!(cdata->res.flags & EXCHGID4_FLAG_CONFIRMED_R)) {
+ if (!(cdata->res.flags & EXCHGID4_FLAG_CONFIRMED_R))
clear_bit(NFS4_SESSION_ESTABLISHED,
- &clp->cl_session->session_state);
- clp->cl_seqid = cdata->res.seqid;
- }
+ &clp->cl_session->session_state);
kfree(clp->cl_serverowner);
clp->cl_serverowner = cdata->res.server_owner;
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-06-08 15:52 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 15:51 [PATCH v2 00/13] NFS/RDMA client-side patches proposed for v4.13 Chuck Lever
[not found] ` <20170608154339.18945.5500.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2017-06-08 15:51 ` [PATCH v2 01/13] xprtrdma: On invalidation failure, remove MWs from rl_registered Chuck Lever
2017-06-08 15:51 ` [PATCH v2 02/13] xprtrdma: Pre-mark remotely invalidated MRs Chuck Lever
2017-06-08 15:52 ` [PATCH v2 03/13] xprtrdma: Pass only the list of registered MRs to ro_unmap_sync Chuck Lever
2017-06-08 15:52 ` [PATCH v2 04/13] xprtrdma: Rename rpcrdma_req::rl_free Chuck Lever
[not found] ` <20170608155212.18945.37327.stgit-FYjufvaPoItvLzlybtyyYzGyq/o6K9yX@public.gmane.org>
2017-06-09 18:58 ` Anna Schumaker
[not found] ` <7ee9b1fd-9628-2767-444e-90c6736d63f9-ZwjVKphTwtPQT0dZR+AlfA@public.gmane.org>
2017-06-09 19:03 ` Chuck Lever
[not found] ` <5332A4D9-ADC4-4DA4-A20E-ACC6019F83BF-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2017-06-09 19:12 ` Chuck Lever
[not found] ` <C0C5BD8B-9D97-48F4-A0AD-C7FC17DA9C00-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2017-06-09 19:15 ` Anna Schumaker
2017-06-08 15:52 ` [PATCH v2 05/13] xprtrdma: Fix client lock-up after application signal fires Chuck Lever
2017-06-08 15:52 ` [PATCH v2 06/13] xprtrdma: Fix FRWR invalidation error recovery Chuck Lever
2017-06-08 15:52 ` [PATCH v2 07/13] xprtrdma: Don't defer MR recovery if ro_map fails Chuck Lever
2017-06-08 15:52 ` [PATCH v2 08/13] NFSv4.1: Handle EXCHGID4_FLAG_CONFIRMED_R during NFSv4.1 migration Chuck Lever
2017-06-08 15:52 ` Chuck Lever [this message]
2017-06-08 15:53 ` [PATCH v2 10/13] xprtrdma: Demote "connect" log messages Chuck Lever
2017-06-08 15:53 ` [PATCH v2 11/13] xprtrdma: FMR does not need list_del_init() Chuck Lever
2017-06-08 15:53 ` [PATCH v2 12/13] xprtrdma: Replace PAGE_MASK with offset_in_page() Chuck Lever
2017-06-08 15:53 ` [PATCH v2 13/13] xprtrdma: Fix documenting comments in frwr_ops.c Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170608155252.18945.61089.stgit@manet.1015granger.net \
--to=chuck.lever-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox