From: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Don Hiatt <don.hiatt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: linux-rdma <linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] rdma-next v3-v5: Add OPA extended LID support
Date: Fri, 11 Aug 2017 21:20:07 +0300 [thread overview]
Message-ID: <20170811182007.GJ24282@mtr-leonro.local> (raw)
In-Reply-To: <1502473595-8143-1-git-send-email-don.hiatt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 12416 bytes --]
On Fri, Aug 11, 2017 at 01:46:35PM -0400, Don Hiatt wrote:
> This is an incremental patch to move from v3 of the 'Add OPA
> extended LID support' to v5 of the series.
>
> This patch series primarily increases sizes of variables that hold
> lid values from 16 to 32 bits. Additionally, it adds a check in
> the IB mad stack to verify a properly formatted MAD when OPA
> extended LIDs are used.
>
It should be after "---" and put "rdma-next v3-v5" after PATCH and not
as part of subject line.
> Changes from v4:
> ---------------
> * Add comment for function usage and a warning to catch bad flows.
You also changed all users of ib_slid_cpu16 to be ib_lid_cpu16
>
> Changes from v3:
> ---------------
> * Add 'IB/core: Add functions to convert 32 bit lids to 16 bits' and
> use them in place of casts.
>
> Signed-off-by: Don Hiatt <don.hiatt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Reviewed-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> ---
> drivers/infiniband/core/cm.c | 4 ++--
> drivers/infiniband/core/user_mad.c | 2 +-
> drivers/infiniband/core/uverbs_cmd.c | 11 ++++++-----
> drivers/infiniband/hw/hfi1/mad.c | 2 +-
> drivers/infiniband/hw/mlx4/alias_GUID.c | 2 +-
> drivers/infiniband/hw/mlx4/mad.c | 8 ++++----
> drivers/infiniband/hw/mlx5/mad.c | 2 +-
> drivers/infiniband/hw/mthca/mthca_cmd.c | 4 ++--
> drivers/infiniband/hw/mthca/mthca_mad.c | 4 ++--
> drivers/infiniband/sw/rdmavt/cq.c | 2 +-
> include/rdma/ib_verbs.h | 26 ++++++++++++++++++++------
> 11 files changed, 41 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
> index d5ca101..8bb7aea 100644
> --- a/drivers/infiniband/core/cm.c
> +++ b/drivers/infiniband/core/cm.c
> @@ -1770,7 +1770,7 @@ static void cm_process_routed_req(struct cm_req_msg *req_msg, struct ib_wc *wc)
> {
> if (!cm_req_get_primary_subnet_local(req_msg)) {
> if (req_msg->primary_local_lid == IB_LID_PERMISSIVE) {
> - req_msg->primary_local_lid = ib_slid_be16(wc->slid);
> + req_msg->primary_local_lid = ib_lid_be16(wc->slid);
> cm_req_set_primary_sl(req_msg, wc->sl);
> }
>
> @@ -1780,7 +1780,7 @@ static void cm_process_routed_req(struct cm_req_msg *req_msg, struct ib_wc *wc)
>
> if (!cm_req_get_alt_subnet_local(req_msg)) {
> if (req_msg->alt_local_lid == IB_LID_PERMISSIVE) {
> - req_msg->alt_local_lid = ib_slid_be16(wc->slid);
> + req_msg->alt_local_lid = ib_lid_be16(wc->slid);
> cm_req_set_alt_sl(req_msg, wc->sl);
> }
>
> diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
> index ff3c67a..c1696e6 100644
> --- a/drivers/infiniband/core/user_mad.c
> +++ b/drivers/infiniband/core/user_mad.c
> @@ -229,7 +229,7 @@ static void recv_handler(struct ib_mad_agent *agent,
> packet->mad.hdr.status = 0;
> packet->mad.hdr.length = hdr_size(file) + mad_recv_wc->mad_len;
> packet->mad.hdr.qpn = cpu_to_be32(mad_recv_wc->wc->src_qp);
> - packet->mad.hdr.lid = ib_slid_be16(mad_recv_wc->wc->slid);
> + packet->mad.hdr.lid = ib_lid_be16(mad_recv_wc->wc->slid);
> packet->mad.hdr.sl = mad_recv_wc->wc->sl;
> packet->mad.hdr.path_bits = mad_recv_wc->wc->dlid_path_bits;
> packet->mad.hdr.pkey_index = mad_recv_wc->wc->pkey_index;
> diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
> index eb0da37..0eed250 100644
> --- a/drivers/infiniband/core/uverbs_cmd.c
> +++ b/drivers/infiniband/core/uverbs_cmd.c
> @@ -275,12 +275,13 @@ ssize_t ib_uverbs_query_port(struct ib_uverbs_file *file,
> resp.bad_pkey_cntr = attr.bad_pkey_cntr;
> resp.qkey_viol_cntr = attr.qkey_viol_cntr;
> resp.pkey_tbl_len = attr.pkey_tbl_len;
> +
> if (rdma_cap_opa_ah(ib_dev, cmd.port_num)) {
> - resp.lid = OPA_TO_IB_UCAST_LID(attr.lid);
> + resp.lid = OPA_TO_IB_UCAST_LID(attr.lid);
> resp.sm_lid = OPA_TO_IB_UCAST_LID(attr.sm_lid);
> } else {
> - resp.lid = (u16)attr.lid;
> - resp.sm_lid = (u16)attr.sm_lid;
> + resp.lid = ib_lid_cpu16(attr.lid);
> + resp.sm_lid = ib_lid_cpu16(attr.sm_lid);
> }
> resp.lmc = attr.lmc;
> resp.max_vl_num = attr.max_vl_num;
> @@ -1206,9 +1207,9 @@ static int copy_wc_to_user(struct ib_device *ib_dev, void __user *dest,
> tmp.wc_flags = wc->wc_flags;
> tmp.pkey_index = wc->pkey_index;
> if (rdma_cap_opa_ah(ib_dev, wc->port_num))
> - tmp.slid = OPA_TO_IB_UCAST_LID(wc->slid);
> + tmp.slid = OPA_TO_IB_UCAST_LID(wc->slid);
> else
> - tmp.slid = ib_slid_cpu16(wc->slid);
> + tmp.slid = ib_lid_cpu16(wc->slid);
> tmp.sl = wc->sl;
> tmp.dlid_path_bits = wc->dlid_path_bits;
> tmp.port_num = wc->port_num;
> diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c
> index 00ebc26..8d1aa34 100644
> --- a/drivers/infiniband/hw/hfi1/mad.c
> +++ b/drivers/infiniband/hw/hfi1/mad.c
> @@ -3958,7 +3958,7 @@ static int opa_local_smp_check(struct hfi1_ibport *ibp,
> const struct ib_wc *in_wc)
> {
> struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
> - u16 slid = ib_slid_cpu16(in_wc->slid);
> + u16 slid = ib_lid_cpu16(in_wc->slid);
> u16 pkey;
>
> if (in_wc->pkey_index >= ARRAY_SIZE(ppd->pkeys))
> diff --git a/drivers/infiniband/hw/mlx4/alias_GUID.c b/drivers/infiniband/hw/mlx4/alias_GUID.c
> index 5a897b0..0e4f60c 100644
> --- a/drivers/infiniband/hw/mlx4/alias_GUID.c
> +++ b/drivers/infiniband/hw/mlx4/alias_GUID.c
> @@ -528,7 +528,7 @@ static int set_guid_rec(struct ib_device *ibdev,
>
> memset(&guid_info_rec, 0, sizeof (struct ib_sa_guidinfo_rec));
>
> - guid_info_rec.lid = cpu_to_be16((u16)attr.lid);
> + guid_info_rec.lid = ib_lid_be16(attr.lid);
> guid_info_rec.block_num = index;
>
> memcpy(guid_info_rec.guid_info_list, rec_det->all_recs,
> diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
> index 04fb44e..0793a21 100644
> --- a/drivers/infiniband/hw/mlx4/mad.c
> +++ b/drivers/infiniband/hw/mlx4/mad.c
> @@ -169,7 +169,7 @@ int mlx4_MAD_IFC(struct mlx4_ib_dev *dev, int mad_ifc_flags,
>
> op_modifier |= 0x4;
>
> - in_modifier |= ib_slid_cpu16(in_wc->slid) << 16;
> + in_modifier |= ib_lid_cpu16(in_wc->slid) << 16;
> }
>
> err = mlx4_cmd_box(dev->dev, inmailbox->dma, outmailbox->dma, in_modifier,
> @@ -625,7 +625,7 @@ int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port,
> memcpy((char *)&tun_mad->hdr.slid_mac_47_32, &(wc->smac[4]), 2);
> } else {
> tun_mad->hdr.sl_vid = cpu_to_be16(((u16)(wc->sl)) << 12);
> - tun_mad->hdr.slid_mac_47_32 = ib_slid_be16(wc->slid);
> + tun_mad->hdr.slid_mac_47_32 = ib_lid_be16(wc->slid);
> }
>
> ib_dma_sync_single_for_device(&dev->ib_dev,
> @@ -826,7 +826,7 @@ static int ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
> }
> }
>
> - slid = in_wc ? ib_slid_cpu16(in_wc->slid) : be16_to_cpu(IB_LID_PERMISSIVE);
> + slid = in_wc ? ib_lid_cpu16(in_wc->slid) : be16_to_cpu(IB_LID_PERMISSIVE);
>
> if (in_mad->mad_hdr.method == IB_MGMT_METHOD_TRAP && slid == 0) {
> forward_trap(to_mdev(ibdev), port_num, in_mad);
> @@ -860,7 +860,7 @@ static int ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
> in_mad->mad_hdr.method == IB_MGMT_METHOD_SET &&
> in_mad->mad_hdr.attr_id == IB_SMP_ATTR_PORT_INFO &&
> !ib_query_port(ibdev, port_num, &pattr))
> - prev_lid = (u16)pattr.lid;
> + prev_lid = ib_lid_cpu16(pattr.lid);
>
> err = mlx4_MAD_IFC(to_mdev(ibdev),
> (mad_flags & IB_MAD_IGNORE_MKEY ? MLX4_MAD_IFC_IGNORE_MKEY : 0) |
> diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c
> index cd2264a..18cfe5b 100644
> --- a/drivers/infiniband/hw/mlx5/mad.c
> +++ b/drivers/infiniband/hw/mlx5/mad.c
> @@ -78,7 +78,7 @@ static int process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
> u16 slid;
> int err;
>
> - slid = in_wc ? ib_slid_cpu16(in_wc->slid) : be16_to_cpu(IB_LID_PERMISSIVE);
> + slid = in_wc ? ib_lid_cpu16(in_wc->slid) : be16_to_cpu(IB_LID_PERMISSIVE);
>
> if (in_mad->mad_hdr.method == IB_MGMT_METHOD_TRAP && slid == 0)
> return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
> diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
> index e19ae0b..d0f062f 100644
> --- a/drivers/infiniband/hw/mthca/mthca_cmd.c
> +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
> @@ -1921,7 +1921,7 @@ int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int ignore_bkey,
> (in_wc->wc_flags & IB_WC_GRH ? 0x80 : 0);
> MTHCA_PUT(inbox, val, MAD_IFC_G_PATH_OFFSET);
>
> - MTHCA_PUT(inbox, ib_slid_cpu16(in_wc->slid), MAD_IFC_RLID_OFFSET);
> + MTHCA_PUT(inbox, ib_lid_cpu16(in_wc->slid), MAD_IFC_RLID_OFFSET);
> MTHCA_PUT(inbox, in_wc->pkey_index, MAD_IFC_PKEY_OFFSET);
>
> if (in_grh)
> @@ -1929,7 +1929,7 @@ int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int ignore_bkey,
>
> op_modifier |= 0x4;
>
> - in_modifier |= ib_slid_cpu16(in_wc->slid) << 16;
> + in_modifier |= ib_lid_cpu16(in_wc->slid) << 16;
> }
>
> err = mthca_cmd_box(dev, inmailbox->dma, outmailbox->dma,
> diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
> index a9caada..093f775 100644
> --- a/drivers/infiniband/hw/mthca/mthca_mad.c
> +++ b/drivers/infiniband/hw/mthca/mthca_mad.c
> @@ -205,7 +205,7 @@ int mthca_process_mad(struct ib_device *ibdev,
> u16 *out_mad_pkey_index)
> {
> int err;
> - u16 slid = in_wc ? ib_slid_cpu16(in_wc->slid) : be16_to_cpu(IB_LID_PERMISSIVE);
> + u16 slid = in_wc ? ib_lid_cpu16(in_wc->slid) : be16_to_cpu(IB_LID_PERMISSIVE);
> u16 prev_lid = 0;
> struct ib_port_attr pattr;
> const struct ib_mad *in_mad = (const struct ib_mad *)in;
> @@ -256,7 +256,7 @@ int mthca_process_mad(struct ib_device *ibdev,
> in_mad->mad_hdr.method == IB_MGMT_METHOD_SET &&
> in_mad->mad_hdr.attr_id == IB_SMP_ATTR_PORT_INFO &&
> !ib_query_port(ibdev, port_num, &pattr))
> - prev_lid = (u16)pattr.lid;
> + prev_lid = ib_lid_cpu16(pattr.lid);
>
> err = mthca_MAD_IFC(to_mdev(ibdev),
> mad_flags & IB_MAD_IGNORE_MKEY,
> diff --git a/drivers/infiniband/sw/rdmavt/cq.c b/drivers/infiniband/sw/rdmavt/cq.c
> index 0335a3d..97d71e4 100644
> --- a/drivers/infiniband/sw/rdmavt/cq.c
> +++ b/drivers/infiniband/sw/rdmavt/cq.c
> @@ -107,7 +107,7 @@ void rvt_cq_enter(struct rvt_cq *cq, struct ib_wc *entry, bool solicited)
> wc->uqueue[head].src_qp = entry->src_qp;
> wc->uqueue[head].wc_flags = entry->wc_flags;
> wc->uqueue[head].pkey_index = entry->pkey_index;
> - wc->uqueue[head].slid = ib_slid_cpu16(entry->slid);
> + wc->uqueue[head].slid = ib_lid_cpu16(entry->slid);
> wc->uqueue[head].sl = entry->sl;
> wc->uqueue[head].dlid_path_bits = entry->dlid_path_bits;
> wc->uqueue[head].port_num = entry->port_num;
> diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
> index 7eaf7d2..941f1a19 100644
> --- a/include/rdma/ib_verbs.h
> +++ b/include/rdma/ib_verbs.h
> @@ -3707,15 +3707,29 @@ static inline enum rdma_ah_attr_type rdma_ah_find_type(struct ib_device *dev,
> return RDMA_AH_ATTR_TYPE_IB;
> }
>
> -/* Return slid in 16bit CPU encoding */
> -static inline u16 ib_slid_cpu16(u32 slid)
> +/**
> + * ib_lid_cpu16 - Return lid in 16bit CPU encoding.
> + * In the current implementation the only way to get
> + * get the 32bit lid is from other sources for OPA.
> + * For IB, lids will always be 16bits so cast the
> + * value accordingly.
> + *
> + * @lid: A 32bit LID
> + */
> +static inline u16 ib_lid_cpu16(u32 lid)
> {
> - return (u16)slid;
> + WARN_ON_ONCE(lid && 0xFFFF0000);
> + return (u16)lid;
> }
>
> -/* Return slid in 16bit BE encoding */
> -static inline u16 ib_slid_be16(u32 slid)
> +/**
> + * ib_lid_be16 - Return lid in 16bit BE encoding.
> + *
> + * @lid: A 32bit LID
> + */
> +static inline u16 ib_lid_be16(u32 lid)
It should return be16 and not u16.
> {
> - return cpu_to_be16((u16)slid);
> + WARN_ON_ONCE(lid && 0xFFFF0000);
> + return cpu_to_be16((u16)lid);
> }
> #endif /* IB_VERBS_H */
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2017-08-11 18:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 17:46 [PATCH] rdma-next v3-v5: Add OPA extended LID support Don Hiatt
[not found] ` <1502473595-8143-1-git-send-email-don.hiatt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2017-08-11 18:20 ` Leon Romanovsky [this message]
[not found] ` <20170811182007.GJ24282-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-08-11 18:36 ` Don Hiatt
[not found] ` <b9d6d2cd-e62d-371d-2c69-69f48533fb99-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2017-08-12 6:26 ` Leon Romanovsky
-- strict thread matches above, loose matches on Subject: below --
2017-08-11 18:35 [PATCH rdma-next v3-v5] " Don Hiatt
[not found] ` <1502476546-9367-1-git-send-email-don.hiatt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2017-08-12 6:29 ` Leon Romanovsky
[not found] ` <20170812062941.GL24282-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-08-14 7:37 ` Leon Romanovsky
[not found] ` <20170814073706.GD24282-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-08-14 16:18 ` Don Hiatt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170811182007.GJ24282@mtr-leonro.local \
--to=leon-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=don.hiatt-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox