[PATCH v5 iproute2 0/8] RDMAtool

Leon Romanovsky
2017-08-17T06:37:30Z

This is fifth revision of series implementing the RDAMtool - the tool
to configure RDMA devices.

It looks like everyone who was interested to read cover letter already did it,
so I'll start from the changelog:

Changelog:
v4->v5:
* Rebased to latest net-next branch
* Moved BIT() macro from devlink to general utils.h file - Patch #1.
* Changed the order of patches - moved man pages to be last patch.
* Rewrote all switch->case->return_string constructions to be static
tables with help of David's macro magic. Thanks a lot.
* Dropped dependency on exported device and port properties. Now tool depends
on RDMA netlink only and all needed code is already in Doug's for-next.
* Added two OPA specific physical link states, because their names is
too broad - TEST and OFFLINE, I named it as OPA_TEST and OPA_OFFLINE.
v3->v4:
* Rebased to latest net-next branch
* Added JSON output -j (json) and -p (pretty output)
* Exported and reused kernel UAPIs and defines instead of hard coded
version.
v2->v3:
* Removed MAX()
* Reduced scope of rd_argv_match
* Removed return from rdma_free_devmap
* Added extra break at rdma_send_msg
v1->v2:
* Squashed multiple (and similar) patches to be one patch for dev object
and one patch for link object.
* Removed port_map struct
* Removed global netlink dump during initialization, it removed the need to store
the intermediate variables and reuse ability of netlink to signal if variable
exists or doesn't.
* Added "-d" --details option and put all CAPs under it.

v0->v1:
* Moved hunk with changes in man/Makefile from first patch to the last patch
* Removed the "unknown command" from the examples in commit messages
* Removed special "caps" parsing command and put it to be part of general "show" command
* Changed parsed capability format to be similar to iproute2 suite
* Added FW version as an output of show command.
* Added forgotten CAP_FLAGS to the nla_policy list
RFC->v0:
* Removed everything that is not implemented yet.
* Abandoned sysfs interfaces in favor of netlink.

-----
The initial proposal was sent as RFC [1] and was based on sysfs entries as POC.

The current series was rewritten completely to work with RDMA netlinks as
a source of user<->kernel communications. In order to achieve that, the
RDMA netlinks were extensively refactored and modernized [2, 3, 4 and 5].

The Doug's for-next tag includes most of the needed patches for this tool.

The following is an example of various runs on my machine with 5 devices
(4 in IB mode and one in Ethernet mode).

### Without parameters
$ rdma
Usage: rdma [ OPTIONS ] OBJECT { COMMAND | help }
where OBJECT := { dev | link | help }
OPTIONS := { -V[ersion] | -d[etails] | -j[son] | -p[retty]}

### With unspecified device name
$ rdma dev
1: mlx5_0: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:3457 sys_image_guid 5254:00c0:fe12:3457
2: mlx5_1: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:3458 sys_image_guid 5254:00c0:fe12:3458
3: mlx5_2: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:3459 sys_image_guid 5254:00c0:fe12:3459
4: mlx5_3: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:345a sys_image_guid 5254:00c0:fe12:345a
5: mlx5_4: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:345b sys_image_guid 5254:00c0:fe12:345b

### Detailed mode
$ rdma -d dev
1: mlx5_0: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:3457 sys_image_guid 5254:00c0:fe12:3457
caps: <BAD_PKEY_CNTR, BAD_QKEY_CNTR, CHANGE_PHY_POR, PORT_ACTIVE_EVENT, SYS_IMAGE_GUID, RC_RNR_NAK_GEN, MEM_WINDOW, UD_IP_CSUM, UD_TSO, XRC, MEM_MGT_EXTENSIONS, BLOCK_MULTICAST_LOOPBACK, MEM_WINDOW_TYPE_2B, RAW_IP_CSUM, MANAGED_FLOW_STEERING, RESIZE_MAX_WR>
2: mlx5_1: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:3458 sys_image_guid 5254:00c0:fe12:3458
caps: <BAD_PKEY_CNTR, BAD_QKEY_CNTR, CHANGE_PHY_POR, PORT_ACTIVE_EVENT, SYS_IMAGE_GUID, RC_RNR_NAK_GEN, MEM_WINDOW, UD_IP_CSUM, UD_TSO, XRC, MEM_MGT_EXTENSIONS, BLOCK_MULTICAST_LOOPBACK, MEM_WINDOW_TYPE_2B, RAW_IP_CSUM, MANAGED_FLOW_STEERING, RESIZE_MAX_WR>
3: mlx5_2: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:3459 sys_image_guid 5254:00c0:fe12:3459
caps: <BAD_PKEY_CNTR, BAD_QKEY_CNTR, CHANGE_PHY_POR, PORT_ACTIVE_EVENT, SYS_IMAGE_GUID, RC_RNR_NAK_GEN, MEM_WINDOW, UD_IP_CSUM, UD_TSO, XRC, MEM_MGT_EXTENSIONS, BLOCK_MULTICAST_LOOPBACK, MEM_WINDOW_TYPE_2B, RAW_IP_CSUM, MANAGED_FLOW_STEERING, RESIZE_MAX_WR>
4: mlx5_3: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:345a sys_image_guid 5254:00c0:fe12:345a
caps: <BAD_PKEY_CNTR, BAD_QKEY_CNTR, CHANGE_PHY_POR, PORT_ACTIVE_EVENT, SYS_IMAGE_GUID, RC_RNR_NAK_GEN, MEM_WINDOW, UD_IP_CSUM, UD_TSO, XRC, MEM_MGT_EXTENSIONS, BLOCK_MULTICAST_LOOPBACK, MEM_WINDOW_TYPE_2B, RAW_IP_CSUM, MANAGED_FLOW_STEERING, RESIZE_MAX_WR>
5: mlx5_4: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:345b sys_image_guid 5254:00c0:fe12:345b
caps: <BAD_PKEY_CNTR, BAD_QKEY_CNTR, CHANGE_PHY_POR, PORT_ACTIVE_EVENT, SYS_IMAGE_GUID, RC_RNR_NAK_GEN, MEM_WINDOW, UD_IP_CSUM, UD_TSO, XRC, MEM_MGT_EXTENSIONS, BLOCK_MULTICAST_LOOPBACK, MEM_WINDOW_TYPE_2B, RAW_IP_CSUM, MANAGED_FLOW_STEERING, RESIZE_MAX_WR>

### Specific device
$ rdma dev show mlx5_4
5: mlx5_4: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:345b sys_image_guid 5254:00c0:fe12:345b

### Specific device in detailed mode
$ rdma dev show mlx5_4 -d
5: mlx5_4: node_type ca fw 2.8.9999 node_guid 5254:00c0:fe12:345b sys_image_guid 5254:00c0:fe12:345b
caps: <BAD_PKEY_CNTR, BAD_QKEY_CNTR, CHANGE_PHY_POR, PORT_ACTIVE_EVENT, SYS_IMAGE_GUID, RC_RNR_NAK_GEN, MEM_WINDOW, UD_IP_CSUM, UD_TSO, XRC, MEM_MGT_EXTENSIONS, BLOCK_MULTICAST_LOOPBACK, MEM_WINDOW_TYPE_2B, RAW_IP_CSUM, MANAGED_FLOW_STEERING, RESIZE_MAX_WR>

### Unknown command (caps)
$ rdma dev show mlx5_4 caps
Unknown parameter 'caps'.

### Link properties without device name
$ rdma link
1/1: mlx5_0/1: subnet_prefix fe80:0000:0000:0000 lid 13399 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
2/1: mlx5_1/1: subnet_prefix fe80:0000:0000:0000 lid 13400 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
3/1: mlx5_2/1: subnet_prefix fe80:0000:0000:0000 lid 13401 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
4/1: mlx5_3/1: state DOWN physical_state DISABLED
5/1: mlx5_4/1: subnet_prefix fe80:0000:0000:0000 lid 13403 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP

### Link properties in detailed mode
$ rdma link -d
1/1: mlx5_0/1: subnet_prefix fe80:0000:0000:0000 lid 13399 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
caps: <AUTO_MIGR>
2/1: mlx5_1/1: subnet_prefix fe80:0000:0000:0000 lid 13400 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
caps: <AUTO_MIGR>
3/1: mlx5_2/1: subnet_prefix fe80:0000:0000:0000 lid 13401 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
caps: <AUTO_MIGR>
4/1: mlx5_3/1: state DOWN physical_state DISABLED
caps: <CM, IP_BASED_GIDS>
5/1: mlx5_4/1: subnet_prefix fe80:0000:0000:0000 lid 13403 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
caps: <AUTO_MIGR>

### All links for specific device
$ rdma link show mlx5_3
1/1: mlx5_0/1: subnet_prefix fe80:0000:0000:0000 lid 13399 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP

### Detailed link properties for specific device
$ rdma link -d show mlx5_3
1/1: mlx5_0/1: subnet_prefix fe80:0000:0000:0000 lid 13399 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP
caps: <AUTO_MIGR>

### Specific port for specific device
$ rdma link show mlx5_4/1
1/1: mlx5_0/1: subnet_prefix fe80:0000:0000:0000 lid 13399 sm_lid 49151 lmc 0 state ACTIVE physical_state LINK_UP

### Unknown parameter
$ rdma link show mlx5_4/1 caps
Unknown parameter 'caps'.

Thanks

Available in the "topic/rdmatool-netlink-v5" topic branch of this git repo:
git://git.kernel.org/pub/scm/linux/kernel/git/leon/iproute2.git

Or for browsing:
https://git.kernel.org/cgit/linux/kernel/git/leon/iproute2.git/log/?h=topic/rdmatool-netlink-v5

Thanks

[1] https://www.spinics.net/lists/linux-rdma/msg49575.html
[2] https://patchwork.kernel.org/patch/9752865/
[3] https://www.spinics.net/lists/linux-rdma/msg50827.html
[4] https://www.spinics.net/lists/linux-rdma/msg51210.html
[5] https://patchwork.kernel.org/patch/9811729/ and https://patchwork.kernel.org/patch/9811731/]

Cc: Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Jason Gunthorpe <jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Cc: Jiri Pirko <jiri-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: Ariel Almog <ariela-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: David Laight <David.Laight-ZS65k/vG3HxXrIkS9f7CXA@public.gmane.org>
Cc: Linux Netdev <netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>

Leon Romanovsky (8):
utils: Move BIT macro to common header
rdma: Add basic infrastructure for RDMA tool
rdma: Add dev object
rdma: Add link object
rdma: Add json and pretty outputs
rdma: Implement json output for dev object
rdma: Add json output to link object
rdma: Add initial manual for the tool

Makefile | 2 +-
devlink/devlink.c | 2 +-
include/utils.h | 2 +
man/man8/rdma-dev.8 | 55 +++++++++
man/man8/rdma-link.8 | 55 +++++++++
man/man8/rdma.8 | 102 +++++++++++++++
rdma/.gitignore | 1 +
rdma/Makefile | 22 ++++
rdma/dev.c | 284 ++++++++++++++++++++++++++++++++++++++++++
rdma/link.c | 343 +++++++++++++++++++++++++++++++++++++++++++++++++++
rdma/rdma.c | 143 +++++++++++++++++++++
rdma/rdma.h | 93 ++++++++++++++
rdma/utils.c | 266 +++++++++++++++++++++++++++++++++++++++
13 files changed, 1368 insertions(+), 2 deletions(-)
create mode 100644 man/man8/rdma-dev.8
create mode 100644 man/man8/rdma-link.8
create mode 100644 man/man8/rdma.8
create mode 100644 rdma/.gitignore
create mode 100644 rdma/Makefile
create mode 100644 rdma/dev.c
create mode 100644 rdma/link.c
create mode 100644 rdma/rdma.c
create mode 100644 rdma/rdma.h
create mode 100644 rdma/utils.c