From: Yuval Shaia <yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
To: Adit Ranadive <aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
Cc: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pv-drivers-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH for-next v1 2/2] RDMA/vmw_pvrdma: Update device query parameters and port caps
Date: Thu, 24 Aug 2017 17:33:39 +0300 [thread overview]
Message-ID: <20170824143338.GB5128@yuvallap> (raw)
In-Reply-To: <a31ee424df9ad51371ff38e4f8239a390df13947.1503468979.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
On Tue, Aug 22, 2017 at 11:19:01PM -0700, Adit Ranadive wrote:
> Added support for two device caps - max_sge_rd, max_fast_reg_page_list_len
> and the IP_BASED_GIDS port cap flag.
And IB_PORT_CM_SUP
>
> Reviewed-by: Jorgen Hansen <jhansen-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
> Reviewed-by: Bryan Tan <bryantan-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
> Reviewed-by: Aditya Sarwade <asarwade-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Adit Ranadive <aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
> ---
> drivers/infiniband/hw/vmw_pvrdma/pvrdma_dev_api.h | 9 ++++++++-
> drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c | 9 +++++++++
> 2 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_dev_api.h b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_dev_api.h
> index 3a308ff..df0a6b5 100644
> --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_dev_api.h
> +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_dev_api.h
> @@ -149,6 +149,13 @@
> ((_dev->dsr->caps.mode == PVRDMA_DEVICE_MODE_ROCE) && \
> (PVRDMA_IS_VERSION17(_dev) || PVRDMA_IS_VERSION18(_dev)))
>
> +/*
> + * Get capability values based on device version.
> + */
> +
> +#define PVRDMA_GET_CAP(_dev, _old_val, _val) \
> + ((PVRDMA_IS_VERSION18(_dev)) ? _val : _old_val)
> +
> enum pvrdma_pci_resource {
> PVRDMA_PCI_RESOURCE_MSIX, /* BAR0: MSI-X, MMIO. */
> PVRDMA_PCI_RESOURCE_REG, /* BAR1: Registers, MMIO. */
> @@ -251,7 +258,7 @@ struct pvrdma_device_caps {
> u8 atomic_ops; /* PVRDMA_ATOMIC_OP_* bits */
> u8 bmme_flags; /* FRWR Mem Mgmt Extensions */
> u8 gid_types; /* PVRDMA_GID_TYPE_FLAG_ */
> - u8 reserved[4];
> + u32 max_fast_reg_page_list_len;
> };
>
> struct pvrdma_ring_page_info {
> diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c
> index 2851704..48776f5 100644
> --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c
> +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c
> @@ -83,6 +83,8 @@ int pvrdma_query_device(struct ib_device *ibdev,
> props->max_qp_wr = dev->dsr->caps.max_qp_wr;
> props->device_cap_flags = dev->dsr->caps.device_cap_flags;
> props->max_sge = dev->dsr->caps.max_sge;
> + props->max_sge_rd = PVRDMA_GET_CAP(dev, dev->dsr->caps.max_sge,
> + dev->dsr->caps.max_sge_rd);
I tend to agree with Leon on the other thread, i think that the following
code is much more readable:
props->max_sge_rd = dev->dsr->caps.max_sge;
if (PVRDMA_IS_VERSION18(dev))
props->max_sge_rd = dev->dsr->caps.max_sge_rd;
And then in the future add something like this:
if (PVRDMA_IS_VERSION19(dev))
props->max_sge_rd = dev->dsr->caps.max_sge_19;
But it is totally up to you.
> props->max_cq = dev->dsr->caps.max_cq;
> props->max_cqe = dev->dsr->caps.max_cqe;
> props->max_mr = dev->dsr->caps.max_mr;
> @@ -101,8 +103,14 @@ int pvrdma_query_device(struct ib_device *ibdev,
> (dev->dsr->caps.bmme_flags & PVRDMA_BMME_FLAG_REMOTE_INV) &&
> (dev->dsr->caps.bmme_flags & PVRDMA_BMME_FLAG_FAST_REG_WR)) {
> props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
> + props->max_fast_reg_page_list_len = PVRDMA_GET_CAP(dev,
> + PVRDMA_MAX_FAST_REG_PAGES,
> + dev->dsr->caps.max_fast_reg_page_list_len);
> }
>
> + props->device_cap_flags |= IB_DEVICE_PORT_ACTIVE_EVENT |
> + IB_DEVICE_RC_RNR_NAK_GEN;
> +
Is it left over from version 17 or a new HW support?
> return 0;
> }
>
> @@ -143,6 +151,7 @@ int pvrdma_query_port(struct ib_device *ibdev, u8 port,
> props->gid_tbl_len = resp->attrs.gid_tbl_len;
> props->port_cap_flags =
> pvrdma_port_cap_flags_to_ib(resp->attrs.port_cap_flags);
> + props->port_cap_flags |= IB_PORT_CM_SUP | IB_PORT_IP_BASED_GIDS;
Ditto.
> props->max_msg_sz = resp->attrs.max_msg_sz;
> props->bad_pkey_cntr = resp->attrs.bad_pkey_cntr;
> props->qkey_viol_cntr = resp->attrs.qkey_viol_cntr;
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-08-24 14:33 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-23 6:18 [PATCH for-next v1 0/2] RDMA/vmw_pvrdma: Add RoCEv2 support Adit Ranadive
[not found] ` <cover.1503468979.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2017-08-23 6:19 ` [PATCH for-next v1 1/2] " Adit Ranadive
[not found] ` <91bf53451b8618acc731f6b8b4235103abae7687.1503468979.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2017-08-24 4:33 ` Leon Romanovsky
2017-08-24 13:51 ` Yuval Shaia
2017-08-23 6:19 ` [PATCH for-next v1 2/2] RDMA/vmw_pvrdma: Update device query parameters and port caps Adit Ranadive
[not found] ` <a31ee424df9ad51371ff38e4f8239a390df13947.1503468979.git.aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2017-08-23 9:09 ` Leon Romanovsky
[not found] ` <20170823090920.GN1724-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-08-23 18:08 ` Adit Ranadive
[not found] ` <34d28cff-79a5-b604-fc1e-8d083f53225d-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2017-08-23 18:53 ` Leon Romanovsky
[not found] ` <20170823185326.GX1724-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-08-23 19:29 ` Adit Ranadive
[not found] ` <6cffa7b7-63ee-ccd8-558d-af4538012159-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2017-08-24 4:32 ` Leon Romanovsky
2017-08-24 4:32 ` Leon Romanovsky
2017-08-24 14:33 ` Yuval Shaia [this message]
2017-08-24 21:47 ` Adit Ranadive
2017-08-24 21:36 ` [PATCH for-next v1 0/2] RDMA/vmw_pvrdma: Add RoCEv2 support Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170824143338.GB5128@yuvallap \
--to=yuval.shaia-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=aditr-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pv-drivers-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).