From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: Harish Chegondi
<harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
"Michael J. Ruhl"
<michael.j.ruhl-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Mike Marciniszyn
<mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Jakub Byczkowski
<jakub.byczkowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH for-rc 7/7] IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load
Date: Tue, 26 Sep 2017 06:06:34 -0700 [thread overview]
Message-ID: <20170926130633.31476.28127.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20170926130434.31476.81826.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Harish Chegondi <harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.
This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.
Fixes: c53df62c7a9a ("IB/hfi1: Check return values from PCI config API calls")
Fixes: bf70a7757736 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Harish Chegondi <harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/pcie.c | 50 ++++++++++++++++---------------------
1 files changed, 21 insertions(+), 29 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 82447b7..09e50fd 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -68,7 +68,7 @@
/*
* Code to adjust PCIe capabilities.
*/
-static int tune_pcie_caps(struct hfi1_devdata *);
+static void tune_pcie_caps(struct hfi1_devdata *);
/*
* Do all the common PCIe setup and initialization.
@@ -351,7 +351,7 @@ int pcie_speeds(struct hfi1_devdata *dd)
*/
int request_msix(struct hfi1_devdata *dd, u32 msireq)
{
- int nvec, ret;
+ int nvec;
nvec = pci_alloc_irq_vectors(dd->pcidev, 1, msireq,
PCI_IRQ_MSIX | PCI_IRQ_LEGACY);
@@ -360,12 +360,7 @@ int request_msix(struct hfi1_devdata *dd, u32 msireq)
return nvec;
}
- ret = tune_pcie_caps(dd);
- if (ret) {
- dd_dev_err(dd, "tune_pcie_caps() failed: %d\n", ret);
- pci_free_irq_vectors(dd->pcidev);
- return ret;
- }
+ tune_pcie_caps(dd);
/* check for legacy IRQ */
if (nvec == 1 && !dd->pcidev->msix_enabled)
@@ -502,7 +497,7 @@ int save_pci_variables(struct hfi1_devdata *dd)
module_param_named(aspm, aspm_mode, uint, S_IRUGO);
MODULE_PARM_DESC(aspm, "PCIe ASPM: 0: disable, 1: enable, 2: dynamic");
-static int tune_pcie_caps(struct hfi1_devdata *dd)
+static void tune_pcie_caps(struct hfi1_devdata *dd)
{
struct pci_dev *parent;
u16 rc_mpss, rc_mps, ep_mpss, ep_mps;
@@ -513,22 +508,14 @@ static int tune_pcie_caps(struct hfi1_devdata *dd)
* Turn on extended tags in DevCtl in case the BIOS has turned it off
* to improve WFR SDMA bandwidth
*/
- ret = pcie_capability_read_word(dd->pcidev,
- PCI_EXP_DEVCTL, &ectl);
- if (ret) {
- dd_dev_err(dd, "Unable to read from PCI config\n");
- return ret;
- }
-
- if (!(ectl & PCI_EXP_DEVCTL_EXT_TAG)) {
+ ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVCTL, &ectl);
+ if ((!ret) && !(ectl & PCI_EXP_DEVCTL_EXT_TAG)) {
dd_dev_info(dd, "Enabling PCIe extended tags\n");
ectl |= PCI_EXP_DEVCTL_EXT_TAG;
ret = pcie_capability_write_word(dd->pcidev,
PCI_EXP_DEVCTL, ectl);
- if (ret) {
- dd_dev_err(dd, "Unable to write to PCI config\n");
- return ret;
- }
+ if (ret)
+ dd_dev_info(dd, "Unable to write to PCI config\n");
}
/* Find out supported and configured values for parent (root) */
parent = dd->pcidev->bus->self;
@@ -536,15 +523,22 @@ static int tune_pcie_caps(struct hfi1_devdata *dd)
* The driver cannot perform the tuning if it does not have
* access to the upstream component.
*/
- if (!parent)
- return -EINVAL;
+ if (!parent) {
+ dd_dev_info(dd, "Parent not found\n");
+ return;
+ }
if (!pci_is_root_bus(parent->bus)) {
dd_dev_info(dd, "Parent not root\n");
- return -EINVAL;
+ return;
+ }
+ if (!pci_is_pcie(parent)) {
+ dd_dev_info(dd, "Parent is not PCI Express capable\n");
+ return;
+ }
+ if (!pci_is_pcie(dd->pcidev)) {
+ dd_dev_info(dd, "PCI device is not PCI Express capable\n");
+ return;
}
-
- if (!pci_is_pcie(parent) || !pci_is_pcie(dd->pcidev))
- return -EINVAL;
rc_mpss = parent->pcie_mpss;
rc_mps = ffs(pcie_get_mps(parent)) - 8;
/* Find out supported and configured values for endpoint (us) */
@@ -590,8 +584,6 @@ static int tune_pcie_caps(struct hfi1_devdata *dd)
ep_mrrs = max_mrrs;
pcie_set_readrq(dd->pcidev, ep_mrrs);
}
-
- return 0;
}
/* End of PCIe capability tuning */
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-09-26 13:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 13:05 [PATCH for-rc 0/7] IB/hfi1: Fixes for RC Dennis Dalessandro
2017-09-26 13:06 ` [PATCH for-rc 5/7] Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0" Dennis Dalessandro
[not found] ` <20170926130620.31476.82301.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2017-09-26 16:27 ` Leon Romanovsky
[not found] ` <20170926130434.31476.81826.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2017-09-26 13:05 ` [PATCH for-rc 1/7] IB/hfi1: Turn off AOC TX after offline substates Dennis Dalessandro
2017-09-26 13:06 ` [PATCH for-rc 2/7] IB/hfi1: Only reset QSFP after link up and turn off AOC TX Dennis Dalessandro
2017-09-26 13:06 ` [PATCH for-rc 3/7] IB/hfi1: Check eeprom config partition validity Dennis Dalessandro
2017-09-26 13:06 ` [PATCH for-rc 4/7] IB/hfi1: Return correct value in general interrupt handler Dennis Dalessandro
2017-09-26 13:06 ` [PATCH for-rc 6/7] IB/hfi1: On error, fix use after free during user context setup Dennis Dalessandro
2017-09-26 13:06 ` Dennis Dalessandro [this message]
2017-09-27 15:15 ` [PATCH for-rc 0/7] IB/hfi1: Fixes for RC Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170926130633.31476.28127.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=harish.chegondi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=jakub.byczkowski-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=michael.j.ruhl-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox