* [PATCH] IB/rdmavt: Convert timers to use timer_setup()
@ 2017-10-16 22:51 Kees Cook
2017-10-18 15:49 ` Doug Ledford
0 siblings, 1 reply; 2+ messages in thread
From: Kees Cook @ 2017-10-16 22:51 UTC (permalink / raw)
To: Doug Ledford
Cc: Dennis Dalessandro, Sean Hefty, Hal Rosenstock, linux-rdma,
linux-kernel
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
setup_timer() was already being called before the open-coded init_timer()
and .data assignment. These are removed as well.
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
---
drivers/infiniband/sw/rdmavt/qp.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
index b8e904905f47..af3967f7d1b5 100644
--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -57,7 +57,7 @@
#include "vt.h"
#include "trace.h"
-static void rvt_rc_timeout(unsigned long arg);
+static void rvt_rc_timeout(struct timer_list *t);
/*
* Convert the AETH RNR timeout code into the number of microseconds.
@@ -845,7 +845,7 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
goto bail_qp;
}
/* initialize timers needed for rc qp */
- setup_timer(&qp->s_timer, rvt_rc_timeout, (unsigned long)qp);
+ timer_setup(&qp->s_timer, rvt_rc_timeout, 0);
hrtimer_init(&qp->s_rnr_timer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
qp->s_rnr_timer.function = rvt_rc_rnr_retry;
@@ -894,8 +894,6 @@ struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
atomic_set(&qp->refcount, 0);
atomic_set(&qp->local_ops_pending, 0);
init_waitqueue_head(&qp->wait);
- init_timer(&qp->s_timer);
- qp->s_timer.data = (unsigned long)qp;
INIT_LIST_HEAD(&qp->rspwait);
qp->state = IB_QPS_RESET;
qp->s_wq = swq;
@@ -2132,9 +2130,9 @@ EXPORT_SYMBOL(rvt_del_timers_sync);
/**
* This is called from s_timer for missing responses.
*/
-static void rvt_rc_timeout(unsigned long arg)
+static void rvt_rc_timeout(struct timer_list *t)
{
- struct rvt_qp *qp = (struct rvt_qp *)arg;
+ struct rvt_qp *qp = from_timer(qp, t, s_timer);
struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
unsigned long flags;
--
2.7.4
--
Kees Cook
Pixel Security
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] IB/rdmavt: Convert timers to use timer_setup()
2017-10-16 22:51 [PATCH] IB/rdmavt: Convert timers to use timer_setup() Kees Cook
@ 2017-10-18 15:49 ` Doug Ledford
0 siblings, 0 replies; 2+ messages in thread
From: Doug Ledford @ 2017-10-18 15:49 UTC (permalink / raw)
To: Kees Cook
Cc: Dennis Dalessandro, Sean Hefty, Hal Rosenstock, linux-rdma,
linux-kernel
On Mon, 2017-10-16 at 15:51 -0700, Kees Cook wrote:
> In preparation for unconditionally passing the struct timer_list
> pointer to
> all timer callbacks, switch to using the new timer_setup() and
> from_timer()
> to pass the timer pointer explicitly.
>
> setup_timer() was already being called before the open-coded
> init_timer()
> and .data assignment. These are removed as well.
>
> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
> Cc: Doug Ledford <dledford@redhat.com>
> Cc: Sean Hefty <sean.hefty@intel.com>
> Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
> Cc: linux-rdma@vger.kernel.org
> Signed-off-by: Kees Cook <keescook@chromium.org>
Thanks, applied.
--
Doug Ledford <dledford@redhat.com>
GPG KeyID: B826A3330E572FDD
Key fingerprint = AE6B 1BDA 122B 23B4 265B 1274 B826 A333 0E57 2FDD
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-18 15:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-16 22:51 [PATCH] IB/rdmavt: Convert timers to use timer_setup() Kees Cook
2017-10-18 15:49 ` Doug Ledford
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).