From: Long Li <longli-Lp/cVzEoVyZiJJESP9tAQJZ3qXmFLfmx@public.gmane.org>
To: Steve French <sfrench-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>,
linux-cifs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
samba-technical-w/Ol4Ecudpl8XjKLYN78aQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Tom Talpey <ttalpey-0li6OtcxBFHby3iVrkZq2A@public.gmane.org>,
Matthew Wilcox <mawilcox-0li6OtcxBFHby3iVrkZq2A@public.gmane.org>,
Stephen Hemminger
<sthemmin-0li6OtcxBFHby3iVrkZq2A@public.gmane.org>
Cc: Long Li <longli-0li6OtcxBFHby3iVrkZq2A@public.gmane.org>
Subject: [Patch v6 20/22] CIFS: SMBD: Read correct returned data length for RDMA write (SMB read) I/O
Date: Sat, 4 Nov 2017 22:44:02 -0700 [thread overview]
Message-ID: <20171105054404.23886-21-longli@exchange.microsoft.com> (raw)
In-Reply-To: <20171105054404.23886-1-longli-Lp/cVzEoVyZiJJESP9tAQJZ3qXmFLfmx@public.gmane.org>
From: Long Li <longli-0li6OtcxBFHby3iVrkZq2A@public.gmane.org>
This patch is for preparing upper layer doing SMB read via RDMA write.
When RDMA write is used for SMB read, the returned data length is in
DataRemaining in the response packet. Reading it properly by adding a
parameter to specifiy where the returned data length is.
Add the defition for memory registration to wdata and return the correct
length based on if RDMA write is used.
Signed-off-by: Long Li <longli-0li6OtcxBFHby3iVrkZq2A@public.gmane.org>
---
fs/cifs/cifsglob.h | 13 +++++++++++--
fs/cifs/cifssmb.c | 7 ++++++-
fs/cifs/smb1ops.c | 4 +++-
fs/cifs/smb2ops.c | 12 ++++++++++--
4 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 2ae7d02..ddf83d8 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -228,8 +228,14 @@ struct smb_version_operations {
__u64 (*get_next_mid)(struct TCP_Server_Info *);
/* data offset from read response message */
unsigned int (*read_data_offset)(char *);
- /* data length from read response message */
- unsigned int (*read_data_length)(char *);
+ /*
+ * Data length from read response message
+ * When in_remaining is true, the returned data length is in
+ * message field DataRemaining for out-of-band data read (e.g through
+ * Memory Registration RDMA write in SMBD).
+ * Otherwise, the returned data length is in message field DataLength.
+ */
+ unsigned int (*read_data_length)(char *, bool in_remaining);
/* map smb to linux error */
int (*map_error)(char *, bool);
/* find mid corresponding to the response message */
@@ -1148,6 +1154,9 @@ struct cifs_readdata {
struct cifs_readdata *rdata,
struct iov_iter *iter);
struct kvec iov[2];
+#ifdef CONFIG_CIFS_SMB_DIRECT
+ struct smbd_mr *mr;
+#endif
unsigned int pagesz;
unsigned int tailsz;
unsigned int credits;
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 08ff56a..a343db4 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1533,8 +1533,13 @@ cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid)
rdata->iov[0].iov_base, server->total_read);
/* how much data is in the response? */
- data_len = server->ops->read_data_length(buf);
+#ifdef CONFIG_CIFS_SMB_DIRECT
+ data_len = server->ops->read_data_length(buf, rdata->mr);
+ if (!rdata->mr && (data_offset + data_len > buflen)) {
+#else
+ data_len = server->ops->read_data_length(buf, false);
if (data_offset + data_len > buflen) {
+#endif
/* data_len is corrupt -- discard frame */
rdata->result = -EIO;
return cifs_readv_discard(server, mid);
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index a723df3..3d495e4 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -87,9 +87,11 @@ cifs_read_data_offset(char *buf)
}
static unsigned int
-cifs_read_data_length(char *buf)
+cifs_read_data_length(char *buf, bool in_remaining)
{
READ_RSP *rsp = (READ_RSP *)buf;
+ /* It's a bug reading remaining data for SMB1 packets */
+ WARN_ON(in_remaining);
return (le16_to_cpu(rsp->DataLengthHigh) << 16) +
le16_to_cpu(rsp->DataLength);
}
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 25028da..1bbd248 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -938,9 +938,13 @@ smb2_read_data_offset(char *buf)
}
static unsigned int
-smb2_read_data_length(char *buf)
+smb2_read_data_length(char *buf, bool in_remaining)
{
struct smb2_read_rsp *rsp = (struct smb2_read_rsp *)buf;
+
+ if (in_remaining)
+ return le32_to_cpu(rsp->DataRemaining);
+
return le32_to_cpu(rsp->DataLength);
}
@@ -2449,7 +2453,11 @@ handle_read_data(struct TCP_Server_Info *server, struct mid_q_entry *mid,
}
data_offset = server->ops->read_data_offset(buf) + 4;
- data_len = server->ops->read_data_length(buf);
+#ifdef CONFIG_CIFS_SMB_DIRECT
+ data_len = server->ops->read_data_length(buf, rdata->mr);
+#else
+ data_len = server->ops->read_data_length(buf, false);
+#endif
if (data_offset < server->vals->read_rsp_size) {
/*
--
2.7.4
next prev parent reply other threads:[~2017-11-05 5:44 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-05 5:43 [Patch v6 00/22] CIFS: Implement SMB Direct protocol Long Li
2017-11-05 5:43 ` [Patch v6 01/22] CIFS: SMBD: Add parameter rdata to smb2_new_read_req Long Li
2017-11-05 5:43 ` [Patch v6 02/22] CIFS: SMBD: Introduce kernel config option CONFIG_CIFS_SMB_DIRECT Long Li
2017-11-05 5:43 ` [Patch v6 03/22] CIFS: SMBD: Add rdma mount option Long Li
2017-11-05 5:43 ` [Patch v6 04/22] CIFS: SMBD: Add SMB Direct protocol initial values and constants Long Li
[not found] ` <20171105054404.23886-5-longli-Lp/cVzEoVyZiJJESP9tAQJZ3qXmFLfmx@public.gmane.org>
2017-11-20 3:53 ` Steve French
2017-11-05 5:43 ` [Patch v6 09/22] CIFS: SMBD: Implement function to reconnect to a SMB Direct transport Long Li
2017-11-05 5:43 ` [Patch v6 13/22] CIFS: SMBD: Set SMB Direct maximum read or write size for I/O Long Li
[not found] ` <20171105054404.23886-1-longli-Lp/cVzEoVyZiJJESP9tAQJZ3qXmFLfmx@public.gmane.org>
2017-11-05 5:43 ` [Patch v6 05/22] CIFS: SMBD: Establish SMB Direct connection Long Li
2017-11-05 5:43 ` [Patch v6 06/22] CIFS: SMBD: export protocol initial values Long Li
2017-11-05 5:43 ` [Patch v6 07/22] CIFS: SMBD: Implement function to create a SMB Direct connection Long Li
[not found] ` <20171105054404.23886-8-longli-Lp/cVzEoVyZiJJESP9tAQJZ3qXmFLfmx@public.gmane.org>
2017-11-20 7:38 ` Leif Sahlberg
2017-11-20 16:56 ` Steve French
2017-11-05 5:43 ` [Patch v6 08/22] CIFS: SMBD: Upper layer connects to SMBDirect session Long Li
2017-11-05 5:43 ` [Patch v6 10/22] CIFS: SMBD: Upper layer reconnects to SMB Direct session Long Li
2017-11-05 5:43 ` [Patch v6 11/22] CIFS: SMBD: Implement function to destroy a SMB Direct connection Long Li
2017-11-05 5:43 ` [Patch v6 12/22] CIFS: SMBD: Upper layer destroys SMB Direct session on shutdown or umount Long Li
2017-11-05 5:43 ` [Patch v6 14/22] CIFS: SMBD: Implement function to receive data via RDMA receive Long Li
2017-11-05 5:43 ` [Patch v6 15/22] CIFS: SMBD: Upper layer receives " Long Li
2017-11-05 5:43 ` [Patch v6 16/22] CIFS: SMBD: Implement function to send data via RDMA send Long Li
2017-11-05 5:43 ` [Patch v6 17/22] CIFS: SMBD: Upper layer sends " Long Li
2017-11-05 5:44 ` [Patch v6 18/22] CIFS: SMBD: Implement RDMA memory registration Long Li
2017-11-05 5:44 ` [Patch v6 19/22] CIFS: SMBD: Upper layer performs SMB write via RDMA read through " Long Li
2017-11-05 5:44 ` Long Li [this message]
2017-11-05 5:44 ` [Patch v6 21/22] CIFS: SMBD: Upper layer performs SMB read via RDMA write " Long Li
2017-11-05 5:44 ` [Patch v6 22/22] CIFS: SMBD: Add SMB Direct debug counters Long Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171105054404.23886-21-longli@exchange.microsoft.com \
--to=longli-lp/cvzeovyzijjesp9taqjz3qxmflfmx@public.gmane.org \
--cc=hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=linux-cifs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=longli-0li6OtcxBFHby3iVrkZq2A@public.gmane.org \
--cc=mawilcox-0li6OtcxBFHby3iVrkZq2A@public.gmane.org \
--cc=samba-technical-w/Ol4Ecudpl8XjKLYN78aQ@public.gmane.org \
--cc=sfrench-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org \
--cc=sthemmin-0li6OtcxBFHby3iVrkZq2A@public.gmane.org \
--cc=ttalpey-0li6OtcxBFHby3iVrkZq2A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox