From: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Jason Gunthorpe <jgg-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Daniel Jurgens <danielj-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
Parav Pandit <parav-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Subject: [PATCH rdma-next 02/15] net/mlx5: Set software owner ID during init HCA
Date: Sun, 24 Dec 2017 14:57:28 +0200 [thread overview]
Message-ID: <20171224125741.25464-3-leon@kernel.org> (raw)
In-Reply-To: <20171224125741.25464-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
From: Daniel Jurgens <danielj-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Generate a unique 128bit identifier for each host and pass that value to
firmware in the INIT_HCA command if it reports the sw_owner_id
capo ability. This value is used by FW to determine if functions are in
use by the same host.
Signed-off-by: Daniel Jurgens <danielj-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Reviewed-by: Parav Pandit <parav-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Signed-off-by: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
drivers/net/ethernet/mellanox/mlx5/core/fw.c | 10 +++++++++-
drivers/net/ethernet/mellanox/mlx5/core/main.c | 6 +++++-
drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h | 2 +-
include/linux/mlx5/device.h | 5 +++++
include/linux/mlx5/mlx5_ifc.h | 5 ++++-
5 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
index 5ef1b56b6a96..9d11e92fb541 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
@@ -195,12 +195,20 @@ int mlx5_query_hca_caps(struct mlx5_core_dev *dev)
return 0;
}
-int mlx5_cmd_init_hca(struct mlx5_core_dev *dev)
+int mlx5_cmd_init_hca(struct mlx5_core_dev *dev, uint32_t *sw_owner_id)
{
u32 out[MLX5_ST_SZ_DW(init_hca_out)] = {0};
u32 in[MLX5_ST_SZ_DW(init_hca_in)] = {0};
+ int i;
MLX5_SET(init_hca_in, in, opcode, MLX5_CMD_OP_INIT_HCA);
+
+ if (MLX5_CAP_GEN(dev, sw_owner_id)) {
+ for (i = 0; i < 4; i++)
+ MLX5_ARRAY_SET(init_hca_in, in, sw_owner_id, i,
+ sw_owner_id[i]);
+ }
+
return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 5f323442cc5a..5f3dc0ede917 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -75,6 +75,8 @@ static unsigned int prof_sel = MLX5_DEFAULT_PROF;
module_param_named(prof_sel, prof_sel, uint, 0444);
MODULE_PARM_DESC(prof_sel, "profile selector. Valid range 0 - 2");
+static u32 sw_owner_id[4];
+
enum {
MLX5_ATOMIC_REQ_MODE_BE = 0x0,
MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS = 0x1,
@@ -1052,7 +1054,7 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv,
goto reclaim_boot_pages;
}
- err = mlx5_cmd_init_hca(dev);
+ err = mlx5_cmd_init_hca(dev, sw_owner_id);
if (err) {
dev_err(&pdev->dev, "init hca failed\n");
goto err_pagealloc_stop;
@@ -1574,6 +1576,8 @@ static int __init init(void)
{
int err;
+ get_random_bytes(&sw_owner_id, sizeof(sw_owner_id));
+
mlx5_core_verify_params();
mlx5_register_debugfs();
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index ff4a0b889a6f..b05868728da7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -86,7 +86,7 @@ enum {
int mlx5_query_hca_caps(struct mlx5_core_dev *dev);
int mlx5_query_board_id(struct mlx5_core_dev *dev);
-int mlx5_cmd_init_hca(struct mlx5_core_dev *dev);
+int mlx5_cmd_init_hca(struct mlx5_core_dev *dev, uint32_t *sw_owner_id);
int mlx5_cmd_teardown_hca(struct mlx5_core_dev *dev);
int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev);
void mlx5_core_event(struct mlx5_core_dev *dev, enum mlx5_dev_event event,
diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 409ffb14298a..18c041966ab8 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -79,6 +79,11 @@
<< __mlx5_dw_bit_off(typ, fld))); \
} while (0)
+#define MLX5_ARRAY_SET(typ, p, fld, idx, v) do { \
+ BUILD_BUG_ON(__mlx5_bit_off(typ, fld) % 32); \
+ MLX5_SET(typ, p, fld[idx], v); \
+} while (0)
+
#define MLX5_SET_TO_ONES(typ, p, fld) do { \
BUILD_BUG_ON(__mlx5_st_sz_bits(typ) % 32); \
*((__be32 *)(p) + __mlx5_dw_off(typ, fld)) = \
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 38a7577a9ce7..b1c81d7a86cb 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -1066,7 +1066,9 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 reserved_at_5f8[0x3];
u8 log_max_xrq[0x5];
- u8 reserved_at_600[0x200];
+ u8 reserved_at_600[0x1e];
+ u8 sw_owner_id;
+ u8 reserved_at_61f[0x1e1];
};
enum mlx5_flow_destination_type {
@@ -5531,6 +5533,7 @@ struct mlx5_ifc_init_hca_in_bits {
u8 op_mod[0x10];
u8 reserved_at_40[0x40];
+ u8 sw_owner_id[4][0x20];
};
struct mlx5_ifc_init2rtr_qp_out_bits {
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-24 12:57 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-24 12:57 [PATCH rdma-next 00/15] Dual Port mlx5 IB Device for RoCE Leon Romanovsky
[not found] ` <20171224125741.25464-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-24 12:57 ` [PATCH rdma-next 01/15] net/mlx5: Fix race for multiple RoCE enable Leon Romanovsky
[not found] ` <20171224125741.25464-2-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-24 21:53 ` Or Gerlitz
[not found] ` <CAJ3xEMg8U_4DpYEWa8t1QpccNzjU6f0shEtQ7fRWg-EtGupy+w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-25 5:59 ` Leon Romanovsky
[not found] ` <20171225055916.GU2942-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-12-25 9:21 ` Or Gerlitz
2017-12-24 12:57 ` Leon Romanovsky [this message]
[not found] ` <20171224125741.25464-3-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-24 22:00 ` [PATCH rdma-next 02/15] net/mlx5: Set software owner ID during init HCA Or Gerlitz
[not found] ` <CAJ3xEMiq-4DGFW-Z3hX3NfsSGXD6bm_uarGF_cm6K7+YuutJBQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-25 5:35 ` Leon Romanovsky
[not found] ` <20171225053534.GT2942-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-12-27 21:28 ` Or Gerlitz
2017-12-27 15:27 ` Daniel Jurgens
[not found] ` <b329f348-2462-2bf4-ee06-064e798c9b86-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-12-27 17:52 ` Jason Gunthorpe
[not found] ` <20171227175208.GD31310-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-12-27 18:06 ` Daniel Jurgens
[not found] ` <37588052-e7cd-b2ad-b2e0-91e03a9401d1-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-12-27 18:10 ` Jason Gunthorpe
2018-01-02 9:34 ` Or Gerlitz
[not found] ` <CAJ3xEMixQ-Tw9gUYYPhNLvrEbntNTQBvLcVUe+x130hkEq15Bg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-02 10:10 ` Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 03/15] IB/core: Change roce_rescan_device to return void Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 04/15] IB/mlx5: Reduce the use of num_port capability Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 05/15] IB/mlx5: Make netdev notifications multiport capable Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 06/15] {net,IB}/mlx5: Manage port association for multiport RoCE Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 07/15] IB/mlx5: Move IB event processing onto a workqueue Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 08/15] IB/mlx5: Implement dual port functionality in query routines Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 09/15] IB/mlx5: Change debugfs to have per port contents Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 10/15] IB/mlx5: Update counter implementation for dual port RoCE Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 11/15] {net,IB}/mlx5: Change set_roce_gid to take a port number Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 12/15] IB/mlx5: Route MADs for dual port RoCE Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 13/15] IB/mlx5: Use correct mdev for vport queries in ib_virt Leon Romanovsky
[not found] ` <20171224125741.25464-14-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-24 22:14 ` Or Gerlitz
[not found] ` <CAJ3xEMgyD693JPtu_vag-q3kVP=Nyag=dPEp15AZcyX62FwkPw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-25 7:25 ` Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 14/15] IB/mlx5: Don't advertise RAW QP support in dual port mode Leon Romanovsky
[not found] ` <20171224125741.25464-15-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-12-24 22:16 ` Or Gerlitz
[not found] ` <CAJ3xEMgAtd1PKN2h1NFj=Mt72msuU5bpFy0jO4KFXxXxGRf7hA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-25 7:16 ` Leon Romanovsky
[not found] ` <20171225071613.GW2942-U/DQcQFIOTAAJjI8aNfphQ@public.gmane.org>
2017-12-25 9:17 ` Or Gerlitz
[not found] ` <CAJ3xEMhtssDWuu8JAB_jhyofKbkeo4vYTLixLeta6vPzKQOp+A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-03 20:35 ` Daniel Jurgens
[not found] ` <ab3fb697-7b2c-685c-2151-5f48d5d7270a-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2018-01-03 20:39 ` Or Gerlitz
[not found] ` <CAJ3xEMimYj8=USqjHEF_uiwJCNoeT5qpbNMYTWUX7EgTVSeuuw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-03 20:43 ` Daniel Jurgens
[not found] ` <6f114e3c-2e16-f7ce-2e60-d06113afc9b8-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2018-01-03 20:47 ` Or Gerlitz
[not found] ` <CAJ3xEMjZfTJP1fi=VosXL_v=AUueWZc54iOsXz1ynikYm-jcjA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-04 5:21 ` Leon Romanovsky
2017-12-24 12:57 ` [PATCH rdma-next 15/15] net/mlx5: Set num_vhca_ports capability Leon Romanovsky
2017-12-24 21:48 ` [PATCH rdma-next 00/15] Dual Port mlx5 IB Device for RoCE Or Gerlitz
[not found] ` <CAJ3xEMhZgEee+VLpV4bV150siOdXwpcp64AGqeqr5Y2o--WRdw@mail.gmail.com>
[not found] ` <CAJ3xEMhZgEee+VLpV4bV150siOdXwpcp64AGqeqr5Y2o--WRdw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-25 9:24 ` Or Gerlitz
[not found] ` <CAJ3xEMgpP0Sbj4vY3_pJDjrDqHLHmkaTSGLyVuBY+aoC6VUnHA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-03 18:58 ` Daniel Jurgens
2017-12-27 15:22 ` Daniel Jurgens
[not found] ` <382ba516-bf7b-0a0b-7a9f-604cbf805c80-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-12-27 21:22 ` Or Gerlitz
[not found] ` <CAJ3xEMi3CvATj-vpfy8E89=ZoPL1mmoiu8HWea_NEwfV2++ZpQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-27 23:20 ` Daniel Jurgens
[not found] ` <a3cf271c-f66c-074a-88bd-b48b39959e6b-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-12-29 18:03 ` Jason Gunthorpe
[not found] ` <20171229180313.GD6513-uk2M96/98Pc@public.gmane.org>
2017-12-29 20:52 ` Daniel Jurgens
[not found] ` <9d102fb2-122c-d7e9-2521-cf61b708d8c0-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2017-12-29 21:27 ` Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171224125741.25464-3-leon@kernel.org \
--to=leon-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=danielj-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=jgg-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=parav-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox