From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: jgg-uk2M96/98Pc@public.gmane.org,
dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Bartlomiej Dudek
<bartlomiej.dudek-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Patel Jay P <jay.p.patel-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH for-next 01/16] IB/hfi1: Do not override given pcie_pset value
Date: Fri, 26 Jan 2018 06:31:27 -0800 [thread overview]
Message-ID: <20180126143123.6868.86785.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20180126142640.6868.12402.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
From: Bartlomiej Dudek <bartlomiej.dudek-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
During PCIe Gen 3 transistion, pcie_pset is read and might be overridden
to a default value(i.e. 255) in do_pcie_gen3_transition() routine.
If the pcie_pset value is overridden then this new value will be used
during initialization of next adapter on a different card.
Introducing a new local variable to avoid modification of pcie_pset
Reviewed-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Patel Jay P <jay.p.patel-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/hw/hfi1/pcie.c | 23 ++++++++++++-----------
1 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 8c7e7a6..83d66e8 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -1034,6 +1034,7 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
int do_retry, retry_count = 0;
int intnum = 0;
uint default_pset;
+ uint pset = pcie_pset;
u16 target_vector, target_speed;
u16 lnkctl2, vendor;
u8 div;
@@ -1201,16 +1202,16 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
*
* Set Gen3EqPsetReqVec, leave other fields 0.
*/
- if (pcie_pset == UNSET_PSET)
- pcie_pset = default_pset;
- if (pcie_pset > 10) { /* valid range is 0-10, inclusive */
+ if (pset == UNSET_PSET)
+ pset = default_pset;
+ if (pset > 10) { /* valid range is 0-10, inclusive */
dd_dev_err(dd, "%s: Invalid Eq Pset %u, setting to %d\n",
- __func__, pcie_pset, default_pset);
- pcie_pset = default_pset;
+ __func__, pset, default_pset);
+ pset = default_pset;
}
- dd_dev_info(dd, "%s: using EQ Pset %u\n", __func__, pcie_pset);
+ dd_dev_info(dd, "%s: using EQ Pset %u\n", __func__, pset);
pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL106,
- ((1 << pcie_pset) <<
+ ((1 << pset) <<
PCIE_CFG_REG_PL106_GEN3_EQ_PSET_REQ_VEC_SHIFT) |
PCIE_CFG_REG_PL106_GEN3_EQ_EVAL2MS_DISABLE_SMASK |
PCIE_CFG_REG_PL106_GEN3_EQ_PHASE23_EXIT_MODE_SMASK);
@@ -1240,10 +1241,10 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
/* apply static CTLE tunings */
u8 pcie_dc, pcie_lf, pcie_hf, pcie_bw;
- pcie_dc = ctle_tunings[pcie_pset][0];
- pcie_lf = ctle_tunings[pcie_pset][1];
- pcie_hf = ctle_tunings[pcie_pset][2];
- pcie_bw = ctle_tunings[pcie_pset][3];
+ pcie_dc = ctle_tunings[pset][0];
+ pcie_lf = ctle_tunings[pset][1];
+ pcie_hf = ctle_tunings[pset][2];
+ pcie_bw = ctle_tunings[pset][3];
write_gasket_interrupt(dd, intnum++, 0x0026, 0x0200 | pcie_dc);
write_gasket_interrupt(dd, intnum++, 0x0026, 0x0100 | pcie_lf);
write_gasket_interrupt(dd, intnum++, 0x0026, 0x0000 | pcie_hf);
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-01-26 14:31 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-26 14:31 [PATCH for-next 00/16] IB/hfi1,core: Driver updates for 1/26/2018 Dennis Dalessandro
[not found] ` <20180126142640.6868.12402.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2018-01-26 14:31 ` Dennis Dalessandro [this message]
2018-01-26 14:31 ` [PATCH for-next 02/16] IB/hfi1: Fix for early release of sdma context Dennis Dalessandro
2018-01-26 14:31 ` [PATCH for-next 03/16] IB/hfi1: Remove dependence on qp->s_hdrwords Dennis Dalessandro
2018-01-26 14:31 ` [PATCH for-next 04/16] IB/hfi1: Remove blind constants from 16B update Dennis Dalessandro
2018-01-26 14:31 ` [PATCH for-next 05/16] IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit times Dennis Dalessandro
2018-01-26 14:32 ` [PATCH for-next 06/16] IB/hfi1: hfi1_open_file() missing kobject_put in err path Dennis Dalessandro
[not found] ` <20180126143203.6868.85360.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2018-01-26 15:51 ` Jason Gunthorpe
2018-01-26 14:32 ` [PATCH for-next 07/16] IB/hfi1: Show fault stats in both TX and RX directions Dennis Dalessandro
2018-01-26 14:32 ` [PATCH for-next 08/16] IB/hfi1: Prevent LNI hang when LCB can't obtain lanes Dennis Dalessandro
2018-01-26 14:32 ` [PATCH for-next 09/16] IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packet Dennis Dalessandro
2018-01-26 14:32 ` [PATCH for-next 10/16] IB/hfi1: Optimize packet type comparison using 9B and bypass code paths Dennis Dalessandro
2018-01-26 14:32 ` [PATCH for-next 11/16] IB/hfi1: Look up ibport using a pointer in receive path Dennis Dalessandro
2018-01-26 14:32 ` [PATCH for-next 12/16] IB/hfi1: Remove unnecessary fecn and becn fields Dennis Dalessandro
2018-01-26 14:33 ` [PATCH for-next 13/16] IB/hfi1: Optimize process_receive_ib() Dennis Dalessandro
2018-01-26 14:33 ` [PATCH for-next 14/16] IB/hfi1: Re-order IRQ cleanup to address driver cleanup race Dennis Dalessandro
2018-01-26 14:33 ` [PATCH for-next 15/16] IB/core: Map iWarp AH type to undefined in rdma_ah_find_type Dennis Dalessandro
[not found] ` <20180126143315.6868.67354.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2018-01-26 15:45 ` Jason Gunthorpe
[not found] ` <20180126154540.GA23869-uk2M96/98Pc@public.gmane.org>
2018-01-26 15:58 ` Dennis Dalessandro
[not found] ` <ce815670-cf1b-5199-9a52-2779cb8f8c75-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2018-01-26 17:47 ` Parav Pandit
2018-01-26 18:55 ` Shiraz Saleem
2018-01-26 14:33 ` [PATCH for-next 16/16] IB/ipoib: Fix for potential no-carrier state Dennis Dalessandro
[not found] ` <20180126143323.6868.89162.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2018-01-26 17:00 ` Doug Ledford
[not found] ` <1516986011.27592.207.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2018-01-26 17:06 ` Jason Gunthorpe
[not found] ` <20180126170610.GD23869-uk2M96/98Pc@public.gmane.org>
2018-01-26 17:09 ` Doug Ledford
[not found] ` <1516986596.27592.209.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2018-01-26 17:27 ` Estrin, Alex
2018-01-26 17:18 ` Estrin, Alex
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180126143123.6868.86785.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=bartlomiej.dudek-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=jay.p.patel-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=jgg-uk2M96/98Pc@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox