From: Mike Marciniszyn <mike.marciniszyn@intel.com>
To: jgg@ziepe.ca, dledford@redhat.com
Cc: linux-rdma@vger.kernel.org
Subject: [PATCH 5/6] IB/hfi1: Do not update hcrc for a KDETH packet during fault injection
Date: Mon, 15 Jul 2019 12:45:46 -0400 [thread overview]
Message-ID: <20190715164546.74174.99296.stgit@awfm-01.aw.intel.com> (raw)
In-Reply-To: <20190715164423.74174.4994.stgit@awfm-01.aw.intel.com>
From: Kaike Wan <kaike.wan@intel.com>
When a KDETH packet is subject to fault injection during transmission,
HCRC is supposed to be omitted from the packet so that the hardware on
the receiver side would drop the packet. When creating pbc, the
PbcInsertHcrc field is set to be PBC_IHCRC_NONE if the KDETH packet is
subject to fault injection, but overwritten with PBC_IHCRC_LKDETH when
update_hcrc() is called later.
This problem is fixed by not calling update_hcrc() when the packet is
subject to fault injection.
Fixes: 6b6cf9357f78 ("IB/hfi1: Set PbcInsertHcrc for TID RDMA packets")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
---
drivers/infiniband/hw/hfi1/verbs.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/verbs.c b/drivers/infiniband/hw/hfi1/verbs.c
index c4b243f..f4ca436 100644
--- a/drivers/infiniband/hw/hfi1/verbs.c
+++ b/drivers/infiniband/hw/hfi1/verbs.c
@@ -873,16 +873,17 @@ int hfi1_verbs_send_dma(struct rvt_qp *qp, struct hfi1_pkt_state *ps,
else
pbc |= (ib_is_sc5(sc5) << PBC_DC_INFO_SHIFT);
- if (unlikely(hfi1_dbg_should_fault_tx(qp, ps->opcode)))
- pbc = hfi1_fault_tx(qp, ps->opcode, pbc);
pbc = create_pbc(ppd,
pbc,
qp->srate_mbps,
vl,
plen);
- /* Update HCRC based on packet opcode */
- pbc = update_hcrc(ps->opcode, pbc);
+ if (unlikely(hfi1_dbg_should_fault_tx(qp, ps->opcode)))
+ pbc = hfi1_fault_tx(qp, ps->opcode, pbc);
+ else
+ /* Update HCRC based on packet opcode */
+ pbc = update_hcrc(ps->opcode, pbc);
}
tx->wqe = qp->s_wqe;
ret = build_verbs_tx_desc(tx->sde, len, tx, ahg_info, pbc);
@@ -1029,12 +1030,12 @@ int hfi1_verbs_send_pio(struct rvt_qp *qp, struct hfi1_pkt_state *ps,
else
pbc |= (ib_is_sc5(sc5) << PBC_DC_INFO_SHIFT);
+ pbc = create_pbc(ppd, pbc, qp->srate_mbps, vl, plen);
if (unlikely(hfi1_dbg_should_fault_tx(qp, ps->opcode)))
pbc = hfi1_fault_tx(qp, ps->opcode, pbc);
- pbc = create_pbc(ppd, pbc, qp->srate_mbps, vl, plen);
-
- /* Update HCRC based on packet opcode */
- pbc = update_hcrc(ps->opcode, pbc);
+ else
+ /* Update HCRC based on packet opcode */
+ pbc = update_hcrc(ps->opcode, pbc);
}
if (cb)
iowait_pio_inc(&priv->s_iowait);
next prev parent reply other threads:[~2019-07-15 16:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-15 16:45 [PATCH 0/6] More 5.3 patches Mike Marciniszyn
2019-07-15 16:45 ` [PATCH 1/6] IB/hfi1: Check for error on call to alloc_rsm_map_table Mike Marciniszyn
2019-07-15 16:45 ` [PATCH 2/6] IB/hfi1: Unreserve a flushed OPFN request Mike Marciniszyn
2019-07-15 16:45 ` [PATCH 3/6] IB/hfi1: Field not zero-ed when allocating TID flow memory Mike Marciniszyn
2019-07-15 16:45 ` [PATCH 4/6] IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psn Mike Marciniszyn
2019-07-15 16:45 ` Mike Marciniszyn [this message]
2019-07-15 16:45 ` [PATCH 6/6] IB/hfi1: Remove unused define Mike Marciniszyn
2019-07-15 17:54 ` [PATCH 0/6] More 5.3 patches Jason Gunthorpe
2019-07-15 17:55 ` Marciniszyn, Mike
2019-07-15 18:04 ` Jason Gunthorpe
2019-07-15 18:05 ` Marciniszyn, Mike
2019-07-22 18:03 ` Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190715164546.74174.99296.stgit@awfm-01.aw.intel.com \
--to=mike.marciniszyn@intel.com \
--cc=dledford@redhat.com \
--cc=jgg@ziepe.ca \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox