linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jason Gunthorpe <jgg@ziepe.ca>
To: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: dledford@redhat.com, linux-rdma@vger.kernel.org
Subject: Re: [PATCH v3 for-next 00/16] New hfi1 feature: Accelerated IP
Date: Thu, 21 May 2020 16:55:35 -0300	[thread overview]
Message-ID: <20200521195535.GA10609@ziepe.ca> (raw)
In-Reply-To: <20200511155337.173205.77558.stgit@awfm-01.aw.intel.com>

On Mon, May 11, 2020 at 12:05:35PM -0400, Dennis Dalessandro wrote:
> This patch series is an accelerated ipoib using the rdma netdev mechanism
> already present in ipoib. A new device capability bit,
> IB_DEVICE_RDMA_NETDEV_OPA, triggers ipoib to create a datagram QP using the
> IB_QP_CREATE_NETDEV_USE.
> 
> The highlights include:
> - Sharing send and receive resources with VNIC
> - Allows for switching between connected mode and datagram mode
> - Increases the maximum datagram MTU for opa devices to 10k
> 
> The same spreading capability exploited by VNIC is used here to vary
> the receive context that receives the packet.
> 
> The patches are fully bisectable and stepwise implement the capability.
> 
> changes since v2
> *Rebased ontop of latest rdma/for-next
> 
> Changes since v1
> *Fix incorrect parameter to xa_find() in patch 9
> *Address Erez comments and try to hide opa from ipoib in patch 7
> *Fix some typos in RB lines
> 
> 
> Gary Leshner (6):
>       IB/hfi1: Add functions to transmit datagram ipoib packets
>       IB/hfi1: Add the transmit side of a datagram ipoib RDMA netdev
>       IB/hfi1: Remove module parameter for KDETH qpns
>       IB/{rdmavt,hfi1}: Implement creation of accelerated UD QPs
>       IB/{hfi1,ipoib,rdma}: Broadcast ping sent packets which exceeded mtu size
>       IB/ipoib: Add capability to switch between datagram and connected mode
> 
> Grzegorz Andrejczuk (6):
>       IB/hfi1: RSM rules for AIP
>       IB/hfi1: Rename num_vnic_contexts as num_netdev_contexts
>       IB/hfi1: Add interrupt handler functions for accelerated ipoib
>       IB/hfi1: Add rx functions for dummy netdev
>       IB/hfi1: Activate the dummy netdev
>       IB/hfi1: Add packet histogram trace event
> 
> Kaike Wan (3):
>       IB/hfi1: Add accelerated IP capability bit
>       IB/ipoib: Increase ipoib Datagram mode MTU's upper limit
>       IB/hfi1: Add functions to receive accelerated ipoib packets
> 
> Piotr Stankiewicz (1):
>       IB/hfi1: Enable the transmit side of the datagram ipoib netdev

Applied to for-next

Thanks,
Jason

      parent reply	other threads:[~2020-05-21 19:55 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-11 16:05 [PATCH v3 for-next 00/16] New hfi1 feature: Accelerated IP Dennis Dalessandro
2020-05-11 16:05 ` [PATCH v3 for-next 01/16] IB/hfi1: Add accelerated IP capability bit Dennis Dalessandro
2020-05-11 16:05 ` [PATCH v3 for-next 02/16] IB/hfi1: Add functions to transmit datagram ipoib packets Dennis Dalessandro
2020-05-11 16:05 ` [PATCH v3 for-next 03/16] IB/hfi1: Add the transmit side of a datagram ipoib RDMA netdev Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 04/16] IB/hfi1: Remove module parameter for KDETH qpns Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 05/16] IB/{rdmavt, hfi1}: Implement creation of accelerated UD QPs Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 06/16] IB/hfi1: RSM rules for AIP Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 07/16] IB/ipoib: Increase ipoib Datagram mode MTU's upper limit Dennis Dalessandro
2020-05-27  4:03   ` Nathan Chancellor
2020-06-01 13:48     ` Dennis Dalessandro
2020-06-01 13:57       ` Jason Gunthorpe
2020-06-16  0:56         ` Nathan Chancellor
2020-06-16  6:25           ` Leon Romanovsky
2020-06-16 18:42             ` Nathan Chancellor
2020-06-16 19:17               ` Ira Weiny
2020-06-16 19:14             ` Dennis Dalessandro
2020-06-16 19:21               ` Ira Weiny
2020-06-16 19:27                 ` Dennis Dalessandro
2020-06-17  4:35                   ` Leon Romanovsky
2020-05-11 16:06 ` [PATCH v3 for-next 08/16] IB/hfi1: Rename num_vnic_contexts as num_netdev_contexts Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 09/16] IB/hfi1: Add functions to receive accelerated ipoib packets Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 10/16] IB/hfi1: Add interrupt handler functions for accelerated ipoib Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 11/16] IB/hfi1: Add rx functions for dummy netdev Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 12/16] IB/hfi1: Activate the " Dennis Dalessandro
2020-05-11 16:06 ` [PATCH v3 for-next 13/16] IB/{hfi1, ipoib, rdma}: Broadcast ping sent packets which exceeded mtu size Dennis Dalessandro
2020-05-11 16:07 ` [PATCH v3 for-next 14/16] IB/hfi1: Add packet histogram trace event Dennis Dalessandro
2020-05-11 16:07 ` [PATCH v3 for-next 15/16] IB/ipoib: Add capability to switch between datagram and connected mode Dennis Dalessandro
2020-05-11 16:07 ` [PATCH v3 for-next 16/16] IB/hfi1: Enable the transmit side of the datagram ipoib netdev Dennis Dalessandro
2020-05-21 19:55 ` Jason Gunthorpe [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200521195535.GA10609@ziepe.ca \
    --to=jgg@ziepe.ca \
    --cc=dennis.dalessandro@intel.com \
    --cc=dledford@redhat.com \
    --cc=linux-rdma@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).