public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@nvidia.com>
Cc: Parav Pandit <parav@nvidia.com>, linux-rdma@vger.kernel.org
Subject: [PATCH rdma-next v1 2/5] IB/mlx5: Avoid calling query device for reading pkey table length
Date: Wed,  3 Feb 2021 15:01:30 +0200	[thread overview]
Message-ID: <20210203130133.4057329-3-leon@kernel.org> (raw)
In-Reply-To: <20210203130133.4057329-1-leon@kernel.org>

From: Parav Pandit <parav@nvidia.com>

Pkey table length for all the ports of the device is the same.
Currently get_ports_cap() reads and stores it for each port by querying
the device which reads more than just pkey table length.

For representor device ports which can be in range of hundreds, it
queries is for each such port and end up returning same value for all
the ports.

When in representor mode, modify QP accesses pkey port caps for a port
index that can be outside of the port_caps table.

Hence, simplify the logic to query the max pkey table length only once
during device initialization sequence.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
 drivers/infiniband/hw/mlx5/mad.c     |  2 +-
 drivers/infiniband/hw/mlx5/main.c    | 24 ++++++------------------
 drivers/infiniband/hw/mlx5/mlx5_ib.h |  2 +-
 drivers/infiniband/hw/mlx5/qp.c      | 17 ++++-------------
 4 files changed, 12 insertions(+), 33 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c
index e9d0a5269582..cdb47a00e516 100644
--- a/drivers/infiniband/hw/mlx5/mad.c
+++ b/drivers/infiniband/hw/mlx5/mad.c
@@ -549,7 +549,7 @@ int mlx5_query_mad_ifc_port(struct ib_device *ibdev, u8 port,
 	props->port_cap_flags	= be32_to_cpup((__be32 *)(out_mad->data + 20));
 	props->gid_tbl_len	= out_mad->data[50];
 	props->max_msg_sz	= 1 << MLX5_CAP_GEN(mdev, log_max_msg);
-	props->pkey_tbl_len	= dev->port_caps[port - 1].pkey_table_len;
+	props->pkey_tbl_len	= dev->pkey_table_len;
 	props->bad_pkey_cntr	= be16_to_cpup((__be16 *)(out_mad->data + 46));
 	props->qkey_viol_cntr	= be16_to_cpup((__be16 *)(out_mad->data + 48));
 	props->active_width	= out_mad->data[31] & 0xf;
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index d2f185ae2b9c..364dc3e6a2de 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -816,9 +816,7 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
 	if (err)
 		return err;
 
-	err = mlx5_query_max_pkeys(ibdev, &props->max_pkeys);
-	if (err)
-		return err;
+	props->max_pkeys = dev->pkey_table_len;
 
 	err = mlx5_query_vendor_id(ibdev, &props->vendor_id);
 	if (err)
@@ -2979,7 +2977,6 @@ static void get_ext_port_caps(struct mlx5_ib_dev *dev)
 
 static int __get_port_caps(struct mlx5_ib_dev *dev, u8 port)
 {
-	struct ib_device_attr *dprops = NULL;
 	struct ib_port_attr *pprops = NULL;
 	int err = -ENOMEM;
 
@@ -2987,16 +2984,6 @@ static int __get_port_caps(struct mlx5_ib_dev *dev, u8 port)
 	if (!pprops)
 		goto out;
 
-	dprops = kmalloc(sizeof(*dprops), GFP_KERNEL);
-	if (!dprops)
-		goto out;
-
-	err = mlx5_ib_query_device(&dev->ib_dev, dprops, NULL);
-	if (err) {
-		mlx5_ib_warn(dev, "query_device failed %d\n", err);
-		goto out;
-	}
-
 	err = mlx5_ib_query_port(&dev->ib_dev, port, pprops);
 	if (err) {
 		mlx5_ib_warn(dev, "query_port %d failed %d\n",
@@ -3004,15 +2991,12 @@ static int __get_port_caps(struct mlx5_ib_dev *dev, u8 port)
 		goto out;
 	}
 
-	dev->port_caps[port - 1].pkey_table_len = dprops->max_pkeys;
 	dev->port_caps[port - 1].gid_table_len = pprops->gid_tbl_len;
 	mlx5_ib_dbg(dev, "port %d: pkey_table_len %d, gid_table_len %d\n",
-		    port, dprops->max_pkeys, pprops->gid_tbl_len);
+		    port, dev->pkey_table_len, pprops->gid_tbl_len);
 
 out:
 	kfree(pprops);
-	kfree(dprops);
-
 	return err;
 }
 
@@ -3979,6 +3963,10 @@ static int mlx5_ib_stage_init_init(struct mlx5_ib_dev *dev)
 	if (err)
 		goto err_mp;
 
+	err = mlx5_query_max_pkeys(&dev->ib_dev, &dev->pkey_table_len);
+	if (err)
+		goto err_mp;
+
 	if (mlx5_use_mad_ifc(dev))
 		get_ext_port_caps(dev);
 
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index c2f91c15b973..36a92f3c29e3 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -1038,7 +1038,6 @@ struct mlx5_var_table {
 
 struct mlx5_port_caps {
 	int gid_table_len;
-	int pkey_table_len;
 	bool has_smi;
 	u8 ext_port_cap;
 };
@@ -1104,6 +1103,7 @@ struct mlx5_ib_dev {
 
 	struct xarray sig_mrs;
 	struct mlx5_port_caps port_caps[MLX5_MAX_PORTS];
+	u16 pkey_table_len;
 };
 
 static inline struct mlx5_ib_cq *to_mibcq(struct mlx5_core_cq *mcq)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 5274349dd998..475470237e0b 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -4231,7 +4231,6 @@ int mlx5_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	enum ib_qp_type qp_type;
 	enum ib_qp_state cur_state, new_state;
 	int err = -EINVAL;
-	int port;
 
 	if (!mlx5_ib_modify_qp_allowed(dev, qp, ibqp->qp_type))
 		return -EOPNOTSUPP;
@@ -4276,10 +4275,6 @@ int mlx5_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	cur_state = attr_mask & IB_QP_CUR_STATE ? attr->cur_qp_state : qp->state;
 	new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state;
 
-	if (!(cur_state == new_state && cur_state == IB_QPS_RESET)) {
-		port = attr_mask & IB_QP_PORT ? attr->port_num : qp->port;
-	}
-
 	if (qp->flags & IB_QP_CREATE_SOURCE_QPN) {
 		if (attr_mask & ~(IB_QP_STATE | IB_QP_CUR_STATE)) {
 			mlx5_ib_dbg(dev, "invalid attr_mask 0x%x when underlay QP is used\n",
@@ -4308,14 +4303,10 @@ int mlx5_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		goto out;
 	}
 
-	if (attr_mask & IB_QP_PKEY_INDEX) {
-		port = attr_mask & IB_QP_PORT ? attr->port_num : qp->port;
-		if (attr->pkey_index >=
-		    dev->port_caps[port - 1].pkey_table_len) {
-			mlx5_ib_dbg(dev, "invalid pkey index %d\n",
-				    attr->pkey_index);
-			goto out;
-		}
+	if ((attr_mask & IB_QP_PKEY_INDEX) &&
+	    attr->pkey_index >= dev->pkey_table_len) {
+		mlx5_ib_dbg(dev, "invalid pkey index %d\n", attr->pkey_index);
+		goto out;
 	}
 
 	if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC &&
-- 
2.29.2


  parent reply	other threads:[~2021-02-03 13:02 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03 13:01 [PATCH rdma-next v1 0/5] Various cleanups Leon Romanovsky
2021-02-03 13:01 ` [PATCH rdma-next v1 1/5] IB/mlx5: Move mlx5_port_caps from mlx5_core_dev to mlx5_ib_dev Leon Romanovsky
2021-02-03 13:01 ` Leon Romanovsky [this message]
2021-02-03 13:01 ` [PATCH rdma-next v1 3/5] IB/mlx5: Improve query port for representor port Leon Romanovsky
2021-02-03 13:01 ` [PATCH rdma-next v1 4/5] RDMA/core: Introduce and use API to read port immutable data Leon Romanovsky
2021-02-03 13:01 ` [PATCH rdma-next v1 5/5] IB/mlx5: Use rdma_for_each_port for port iteration Leon Romanovsky
2021-02-05 17:40 ` [PATCH rdma-next v1 0/5] Various cleanups Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210203130133.4057329-3-leon@kernel.org \
    --to=leon@kernel.org \
    --cc=dledford@redhat.com \
    --cc=jgg@nvidia.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=parav@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox