[PATCH AUTOSEL 5.16 051/109] net/mlx5e: Disable TX queues before registering the netdev

[PATCH AUTOSEL 5.16 051/109] net/mlx5e: Disable TX queues before registering the netdev

[Sasha Levin]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

[ Upstream commit d08c6e2a4d0308a7922d7ef3b1b3af45d4096aad ]

Normally, the queues are disabled when the channels are deactivated, and
enabled when the channels are activated. However, on register, the
channels are not active, but the queues are enabled by default. This
change fixes it, preventing mlx5e_xmit from running when the channels
are deactivated in the beginning.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 22de7327c5a8..4730d6c14aeb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5223,6 +5223,7 @@ mlx5e_create_netdev(struct mlx5_core_dev *mdev, const struct mlx5e_profile *prof
 	}
 
 	netif_carrier_off(netdev);
+	netif_tx_disable(netdev);
 	dev_net_set(netdev, mlx5_core_net(mdev));
 
 	return netdev;
-- 
2.34.1

[PATCH AUTOSEL 5.16 094/109] net/mlx5e: Remove overzealous validations in netlink EEPROM query

[Sasha Levin]

From: Gal Pressman <gal@nvidia.com>

[ Upstream commit 970adfb76095fa719778d70a6b86030d2feb88dd ]

Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query
(get_module_eeprom_by_page) the driver should not try to validate the
query parameters, but just perform the read requested by the userspace.

Recent discussion in the mailing list:
https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net/

Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/port.c    | 23 -------------------
 1 file changed, 23 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 7b16a1188aab..fd79860de723 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -433,35 +433,12 @@ int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev,
 				     struct mlx5_module_eeprom_query_params *params,
 				     u8 *data)
 {
-	u8 module_id;
 	int err;
 
 	err = mlx5_query_module_num(dev, &params->module_number);
 	if (err)
 		return err;
 
-	err = mlx5_query_module_id(dev, params->module_number, &module_id);
-	if (err)
-		return err;
-
-	switch (module_id) {
-	case MLX5_MODULE_ID_SFP:
-		if (params->page > 0)
-			return -EINVAL;
-		break;
-	case MLX5_MODULE_ID_QSFP:
-	case MLX5_MODULE_ID_QSFP28:
-	case MLX5_MODULE_ID_QSFP_PLUS:
-		if (params->page > 3)
-			return -EINVAL;
-		break;
-	case MLX5_MODULE_ID_DSFP:
-		break;
-	default:
-		mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id);
-		return -EINVAL;
-	}
-
 	if (params->i2c_address != MLX5_I2C_ADDR_HIGH &&
 	    params->i2c_address != MLX5_I2C_ADDR_LOW) {
 		mlx5_core_err(dev, "I2C address not recognized: 0x%x\n", params->i2c_address);
-- 
2.34.1