From: Bob Pearson <rpearsonhpe@gmail.com>
To: jgg@nvidia.com, zyjzyj2000@gmail.com, linux-rdma@vger.kernel.org
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Subject: [PATCH for-next] RDMA/rxe: Remove support for SMI QPs from rdma_rxe
Date: Thu, 7 Apr 2022 13:54:17 -0500 [thread overview]
Message-ID: <20220407185416.16372-1-rpearsonhpe@gmail.com> (raw)
Currently the rdma_rxe driver supports SMI type QPs in a few places
which is incorrect. RoCE devices never should support SMI QPs.
This commit removes SMI QP support from the driver.
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
---
drivers/infiniband/sw/rxe/rxe_opcode.c | 2 --
drivers/infiniband/sw/rxe/rxe_qp.c | 14 +-------------
drivers/infiniband/sw/rxe/rxe_recv.c | 1 -
drivers/infiniband/sw/rxe/rxe_req.c | 1 -
drivers/infiniband/sw/rxe/rxe_resp.c | 2 --
drivers/infiniband/sw/rxe/rxe_verbs.c | 1 -
drivers/infiniband/sw/rxe/rxe_verbs.h | 1 -
7 files changed, 1 insertion(+), 21 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_opcode.c b/drivers/infiniband/sw/rxe/rxe_opcode.c
index df596ba7527d..d4ba4d506f17 100644
--- a/drivers/infiniband/sw/rxe/rxe_opcode.c
+++ b/drivers/infiniband/sw/rxe/rxe_opcode.c
@@ -29,7 +29,6 @@ struct rxe_wr_opcode_info rxe_wr_opcode_info[] = {
[IB_WR_SEND] = {
.name = "IB_WR_SEND",
.mask = {
- [IB_QPT_SMI] = WR_INLINE_MASK | WR_SEND_MASK,
[IB_QPT_GSI] = WR_INLINE_MASK | WR_SEND_MASK,
[IB_QPT_RC] = WR_INLINE_MASK | WR_SEND_MASK,
[IB_QPT_UC] = WR_INLINE_MASK | WR_SEND_MASK,
@@ -39,7 +38,6 @@ struct rxe_wr_opcode_info rxe_wr_opcode_info[] = {
[IB_WR_SEND_WITH_IMM] = {
.name = "IB_WR_SEND_WITH_IMM",
.mask = {
- [IB_QPT_SMI] = WR_INLINE_MASK | WR_SEND_MASK,
[IB_QPT_GSI] = WR_INLINE_MASK | WR_SEND_MASK,
[IB_QPT_RC] = WR_INLINE_MASK | WR_SEND_MASK,
[IB_QPT_UC] = WR_INLINE_MASK | WR_SEND_MASK,
diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index 62acf890af6c..ff58f76347c9 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -63,7 +63,6 @@ int rxe_qp_chk_init(struct rxe_dev *rxe, struct ib_qp_init_attr *init)
int port_num = init->port_num;
switch (init->qp_type) {
- case IB_QPT_SMI:
case IB_QPT_GSI:
case IB_QPT_RC:
case IB_QPT_UC:
@@ -81,7 +80,7 @@ int rxe_qp_chk_init(struct rxe_dev *rxe, struct ib_qp_init_attr *init)
if (rxe_qp_chk_cap(rxe, cap, !!init->srq))
goto err1;
- if (init->qp_type == IB_QPT_SMI || init->qp_type == IB_QPT_GSI) {
+ if (init->qp_type == IB_QPT_GSI) {
if (!rdma_is_port_valid(&rxe->ib_dev, port_num)) {
pr_warn("invalid port = %d\n", port_num);
goto err1;
@@ -89,11 +88,6 @@ int rxe_qp_chk_init(struct rxe_dev *rxe, struct ib_qp_init_attr *init)
port = &rxe->port;
- if (init->qp_type == IB_QPT_SMI && port->qp_smi_index) {
- pr_warn("SMI QP exists for port %d\n", port_num);
- goto err1;
- }
-
if (init->qp_type == IB_QPT_GSI && port->qp_gsi_index) {
pr_warn("GSI QP exists for port %d\n", port_num);
goto err1;
@@ -167,12 +161,6 @@ static void rxe_qp_init_misc(struct rxe_dev *rxe, struct rxe_qp *qp,
port = &rxe->port;
switch (init->qp_type) {
- case IB_QPT_SMI:
- qp->ibqp.qp_num = 0;
- port->qp_smi_index = qpn;
- qp->attr.port_num = init->port_num;
- break;
-
case IB_QPT_GSI:
qp->ibqp.qp_num = 1;
port->qp_gsi_index = qpn;
diff --git a/drivers/infiniband/sw/rxe/rxe_recv.c b/drivers/infiniband/sw/rxe/rxe_recv.c
index d09a8b68c962..f3ad7b6dbd97 100644
--- a/drivers/infiniband/sw/rxe/rxe_recv.c
+++ b/drivers/infiniband/sw/rxe/rxe_recv.c
@@ -34,7 +34,6 @@ static int check_type_state(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
}
break;
case IB_QPT_UD:
- case IB_QPT_SMI:
case IB_QPT_GSI:
if (unlikely(pkt_type != IB_OPCODE_UD)) {
pr_warn_ratelimited("bad qp type\n");
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index ae5fbc79dd5c..52c1d8ff6e5b 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -308,7 +308,6 @@ static int next_opcode(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
case IB_QPT_UC:
return next_opcode_uc(qp, opcode, fits);
- case IB_QPT_SMI:
case IB_QPT_UD:
case IB_QPT_GSI:
switch (opcode) {
diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
index 16fc7ea1298d..9dc38f7c990b 100644
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -277,7 +277,6 @@ static enum resp_states check_op_valid(struct rxe_qp *qp,
break;
case IB_QPT_UD:
- case IB_QPT_SMI:
case IB_QPT_GSI:
break;
@@ -819,7 +818,6 @@ static enum resp_states execute(struct rxe_qp *qp, struct rxe_pkt_info *pkt)
if (pkt->mask & RXE_SEND_MASK) {
if (qp_type(qp) == IB_QPT_UD ||
- qp_type(qp) == IB_QPT_SMI ||
qp_type(qp) == IB_QPT_GSI) {
if (skb->protocol == htons(ETH_P_IP)) {
memset(&hdr.reserved, 0,
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index 67184b0281a0..58e4412b1d16 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -536,7 +536,6 @@ static void init_send_wr(struct rxe_qp *qp, struct rxe_send_wr *wr,
wr->send_flags = ibwr->send_flags;
if (qp_type(qp) == IB_QPT_UD ||
- qp_type(qp) == IB_QPT_SMI ||
qp_type(qp) == IB_QPT_GSI) {
struct ib_ah *ibah = ud_wr(ibwr)->ah;
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
index adae01458606..86068d70cd95 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.h
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
@@ -373,7 +373,6 @@ struct rxe_port {
spinlock_t port_lock; /* guard port */
unsigned int mtu_cap;
/* special QPs */
- u32 qp_smi_index;
u32 qp_gsi_index;
};
--
2.32.0
next reply other threads:[~2022-04-07 18:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 18:54 Bob Pearson [this message]
2022-04-08 17:42 ` [PATCH for-next] RDMA/rxe: Remove support for SMI QPs from rdma_rxe Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220407185416.16372-1-rpearsonhpe@gmail.com \
--to=rpearsonhpe@gmail.com \
--cc=jgg@nvidia.com \
--cc=linux-rdma@vger.kernel.org \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox