public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Bob Pearson <rpearsonhpe@gmail.com>
To: jgg@nvidia.com, zyjzyj2000@gmail.com, leon@kernel.org,
	jhack@hpe.com, ian.ziemba@hpe.com, matsuda-daisuke@fujitsu.com,
	lizhijian@fujitsu.com, haris.phnx@gmail.com,
	linux-rdma@vger.kernel.org
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Subject: [PATCH for-next v2 06/18] RDMA/rxe: Rename task->state_lock to task->lock
Date: Fri, 21 Oct 2022 15:01:07 -0500	[thread overview]
Message-ID: <20221021200118.2163-7-rpearsonhpe@gmail.com> (raw)
In-Reply-To: <20221021200118.2163-1-rpearsonhpe@gmail.com>

Rename task-state_lock to task->lock

Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
---
 drivers/infiniband/sw/rxe/rxe_task.c | 18 +++++++++---------
 drivers/infiniband/sw/rxe/rxe_task.h |  2 +-
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_task.c b/drivers/infiniband/sw/rxe/rxe_task.c
index fb953f5195b8..0208d833a41b 100644
--- a/drivers/infiniband/sw/rxe/rxe_task.c
+++ b/drivers/infiniband/sw/rxe/rxe_task.c
@@ -31,22 +31,22 @@ static void do_task(struct tasklet_struct *t)
 	struct rxe_task *task = from_tasklet(task, t, tasklet);
 	unsigned int iterations = RXE_MAX_ITERATIONS;
 
-	spin_lock_bh(&task->state_lock);
+	spin_lock_bh(&task->lock);
 	switch (task->state) {
 	case TASK_STATE_START:
 		task->state = TASK_STATE_BUSY;
-		spin_unlock_bh(&task->state_lock);
+		spin_unlock_bh(&task->lock);
 		break;
 
 	case TASK_STATE_BUSY:
 		task->state = TASK_STATE_ARMED;
 		fallthrough;
 	case TASK_STATE_ARMED:
-		spin_unlock_bh(&task->state_lock);
+		spin_unlock_bh(&task->lock);
 		return;
 
 	default:
-		spin_unlock_bh(&task->state_lock);
+		spin_unlock_bh(&task->lock);
 		pr_warn("%s failed with bad state %d\n", __func__, task->state);
 		return;
 	}
@@ -55,7 +55,7 @@ static void do_task(struct tasklet_struct *t)
 		cont = 0;
 		ret = task->func(task->arg);
 
-		spin_lock_bh(&task->state_lock);
+		spin_lock_bh(&task->lock);
 		switch (task->state) {
 		case TASK_STATE_BUSY:
 			if (ret) {
@@ -84,7 +84,7 @@ static void do_task(struct tasklet_struct *t)
 			pr_warn("%s failed with bad state %d\n", __func__,
 				task->state);
 		}
-		spin_unlock_bh(&task->state_lock);
+		spin_unlock_bh(&task->lock);
 	} while (cont);
 
 	task->ret = ret;
@@ -99,7 +99,7 @@ int rxe_init_task(struct rxe_task *task, void *arg, int (*func)(void *))
 	tasklet_setup(&task->tasklet, do_task);
 
 	task->state = TASK_STATE_START;
-	spin_lock_init(&task->state_lock);
+	spin_lock_init(&task->lock);
 
 	return 0;
 }
@@ -115,9 +115,9 @@ void rxe_cleanup_task(struct rxe_task *task)
 	task->destroyed = true;
 
 	do {
-		spin_lock_bh(&task->state_lock);
+		spin_lock_bh(&task->lock);
 		idle = (task->state == TASK_STATE_START);
-		spin_unlock_bh(&task->state_lock);
+		spin_unlock_bh(&task->lock);
 	} while (!idle);
 
 	tasklet_kill(&task->tasklet);
diff --git a/drivers/infiniband/sw/rxe/rxe_task.h b/drivers/infiniband/sw/rxe/rxe_task.h
index 99e0173e5c46..7b88129702ac 100644
--- a/drivers/infiniband/sw/rxe/rxe_task.h
+++ b/drivers/infiniband/sw/rxe/rxe_task.h
@@ -21,7 +21,7 @@ enum {
 struct rxe_task {
 	struct tasklet_struct	tasklet;
 	int			state;
-	spinlock_t		state_lock; /* spinlock for task state */
+	spinlock_t		lock;
 	void			*arg;
 	int			(*func)(void *arg);
 	int			ret;
-- 
2.34.1


  parent reply	other threads:[~2022-10-21 20:02 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-21 20:01 [PATCH v2 00/18] Implement work queues for rdma_rxe Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 01/18] RDMA/rxe: Remove redundant header files Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 02/18] RDMA/rxe: Remove init of task locks from rxe_qp.c Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 03/18] RDMA/rxe: Removed unused name from rxe_task struct Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 04/18] RDMA/rxe: Split rxe_run_task() into two subroutines Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 05/18] RDMA/rxe: Make rxe_do_task static Bob Pearson
2022-10-21 20:01 ` Bob Pearson [this message]
2022-10-21 20:01 ` [PATCH for-next v2 07/18] RDMA/rxe: Make task interface pluggable Bob Pearson
2022-10-25  8:02   ` Daisuke Matsuda (Fujitsu)
2022-10-25 14:16     ` Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 08/18] RDMA/rxe: Split rxe_drain_resp_pkts() Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 09/18] RDMA/rxe: Simplify reset state handling in rxe_resp.c Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 10/18] RDMA/rxe: Handle qp error " Bob Pearson
2022-10-21 21:22   ` kernel test robot
2022-10-21 20:01 ` [PATCH for-next v2 11/18] RDMA/rxe: Cleanup comp tasks in rxe_qp.c Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 12/18] RDMA/rxe: Remove __rxe_do_task() Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 13/18] RDMA/rxe: Make tasks schedule each other Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 14/18] RDMA/rxe: Implement disable/enable_task() Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 15/18] RDMA/rxe: Replace TASK_STATE_START by TASK_STATE_IDLE Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 16/18] RDMA/rxe: Replace task->destroyed by task state INVALID Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 17/18] RDMA/rxe: Add workqueue support for tasks Bob Pearson
2022-10-21 20:01 ` [PATCH for-next v2 18/18] RDMA/rxe: Add parameters to control task type Bob Pearson
2022-10-25  9:35   ` Daisuke Matsuda (Fujitsu)
2022-10-25 11:18     ` Jason Gunthorpe
2022-10-25 14:31       ` Bob Pearson
2022-10-25 16:27         ` Jason Gunthorpe
2022-10-25 14:49     ` Bob Pearson
2022-10-26  7:07       ` Daisuke Matsuda (Fujitsu)
2022-10-28 17:04 ` [PATCH v2 00/18] Implement work queues for rdma_rxe Jason Gunthorpe
2022-10-28 18:16   ` Bob Pearson
2022-10-28 18:17     ` Jason Gunthorpe
2022-10-28 18:58       ` Bob Pearson
2022-10-28 19:16         ` Jason Gunthorpe
2022-10-28 19:29           ` Pearson, Robert B

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221021200118.2163-7-rpearsonhpe@gmail.com \
    --to=rpearsonhpe@gmail.com \
    --cc=haris.phnx@gmail.com \
    --cc=ian.ziemba@hpe.com \
    --cc=jgg@nvidia.com \
    --cc=jhack@hpe.com \
    --cc=leon@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=lizhijian@fujitsu.com \
    --cc=matsuda-daisuke@fujitsu.com \
    --cc=zyjzyj2000@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox