From: Bob Pearson <rpearsonhpe@gmail.com>
To: yanjun.zhu@linux.dev, jgg@ziepe.ca, leon@kernel.org,
linux-rdma@vger.kernel.org, jhack@hpe.com
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Subject: [PATCH for-next v3 05/12] RDMA/rxe: Remove save/rollback_state in rxe_requester
Date: Fri, 29 Mar 2024 09:55:08 -0500 [thread overview]
Message-ID: <20240329145513.35381-8-rpearsonhpe@gmail.com> (raw)
In-Reply-To: <20240329145513.35381-2-rpearsonhpe@gmail.com>
Now that req.task and comp.task are merged it is no longer
necessary to call save_state() before calling rxe_xmit_pkt() and
rollback_state() if rxe_xmit_pkt() fails. This was done
originally to prevent races between rxe_completer() and
rxe_requester() which now cannot happen.
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
---
drivers/infiniband/sw/rxe/rxe_req.c | 40 ++---------------------------
1 file changed, 2 insertions(+), 38 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index 31a611ced3c5..e20462c3040d 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -573,30 +573,6 @@ static void update_wqe_psn(struct rxe_qp *qp,
qp->req.psn = (qp->req.psn + 1) & BTH_PSN_MASK;
}
-static void save_state(struct rxe_send_wqe *wqe,
- struct rxe_qp *qp,
- struct rxe_send_wqe *rollback_wqe,
- u32 *rollback_psn)
-{
- rollback_wqe->state = wqe->state;
- rollback_wqe->first_psn = wqe->first_psn;
- rollback_wqe->last_psn = wqe->last_psn;
- rollback_wqe->dma = wqe->dma;
- *rollback_psn = qp->req.psn;
-}
-
-static void rollback_state(struct rxe_send_wqe *wqe,
- struct rxe_qp *qp,
- struct rxe_send_wqe *rollback_wqe,
- u32 rollback_psn)
-{
- wqe->state = rollback_wqe->state;
- wqe->first_psn = rollback_wqe->first_psn;
- wqe->last_psn = rollback_wqe->last_psn;
- wqe->dma = rollback_wqe->dma;
- qp->req.psn = rollback_psn;
-}
-
static void update_state(struct rxe_qp *qp, struct rxe_pkt_info *pkt)
{
qp->req.opcode = pkt->opcode;
@@ -676,8 +652,6 @@ int rxe_requester(struct rxe_qp *qp)
int opcode;
int err;
int ret;
- struct rxe_send_wqe rollback_wqe;
- u32 rollback_psn;
struct rxe_queue *q = qp->sq.queue;
struct rxe_ah *ah;
struct rxe_av *av;
@@ -799,9 +773,6 @@ int rxe_requester(struct rxe_qp *qp)
pkt.mask = rxe_opcode[opcode].mask;
pkt.wqe = wqe;
- /* save wqe state before we build and send packet */
- save_state(wqe, qp, &rollback_wqe, &rollback_psn);
-
av = rxe_get_av(&pkt, &ah);
if (unlikely(!av)) {
rxe_dbg_qp(qp, "Failed no address vector\n");
@@ -834,10 +805,6 @@ int rxe_requester(struct rxe_qp *qp)
if (ah)
rxe_put(ah);
- /* update wqe state as though we had sent it */
- update_wqe_state(qp, wqe, &pkt);
- update_wqe_psn(qp, wqe, &pkt, payload);
-
err = rxe_xmit_packet(qp, &pkt, skb);
if (err) {
if (err != -EAGAIN) {
@@ -845,11 +812,6 @@ int rxe_requester(struct rxe_qp *qp)
goto err;
}
- /* the packet was dropped so reset wqe to the state
- * before we sent it so we can try to resend
- */
- rollback_state(wqe, qp, &rollback_wqe, rollback_psn);
-
/* force a delay until the dropped packet is freed and
* the send queue is drained below the low water mark
*/
@@ -859,6 +821,8 @@ int rxe_requester(struct rxe_qp *qp)
goto exit;
}
+ update_wqe_state(qp, wqe, &pkt);
+ update_wqe_psn(qp, wqe, &pkt, payload);
update_state(qp, &pkt);
/* A non-zero return value will cause rxe_do_task to
--
2.43.0
next prev parent reply other threads:[~2024-03-29 14:55 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-29 14:55 [PATCH for-next v3 00/12] RDMA/rxe: Various fixes and cleanups Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 01/12] RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 02/12] RDMA/rxe: Allow good work requests to be executed Bob Pearson
2024-03-30 15:01 ` Zhu Yanjun
2024-03-29 14:55 ` [PATCH for-next v3 03/12] RDMA/rxe: Remove redundant scheduling of rxe_completer Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 04/12] RDMA/rxe: Merge request and complete tasks Bob Pearson
2024-03-29 14:55 ` Bob Pearson [this message]
2024-03-29 14:55 ` [PATCH for-next v3 06/12] RDMA/rxe: Don't schedule rxe_completer from rxe_requester Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 07/12] RDMA/rxe: Don't call rxe_requester from rxe_completer Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 08/12] RDMA/rxe: Don't call direct between tasks Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 09/12] RDMA/rxe: Fix incorrect rxe_put in error path Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 10/12] RDMA/rxe: Make rxe_loopback match rxe_send behavior Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 11/12] RDMA/rxe: Get rid of pkt resend on err Bob Pearson
2024-03-29 14:55 ` [PATCH for-next v3 12/12] RDMA/rxe: Let destroy qp succeed with stuck packet Bob Pearson
2024-04-22 20:10 ` [PATCH for-next v3 00/12] RDMA/rxe: Various fixes and cleanups Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240329145513.35381-8-rpearsonhpe@gmail.com \
--to=rpearsonhpe@gmail.com \
--cc=jgg@ziepe.ca \
--cc=jhack@hpe.com \
--cc=leon@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=yanjun.zhu@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox