From: Zhu Yanjun <yanjun.zhu@linux.dev>
To: zyjzyj2000@gmail.com, jgg@ziepe.ca, leon@kernel.org,
linux-rdma@vger.kernel.org
Cc: Zhu Yanjun <yanjun.zhu@linux.dev>
Subject: [PATCH rdma-rc 1/1] RDMA/rxe: Fix the failure of ibv_query_device() and ibv_query_device_ex() tests
Date: Sun, 2 Mar 2025 22:54:44 +0100 [thread overview]
Message-ID: <20250302215444.3742072-1-yanjun.zhu@linux.dev> (raw)
In rdma-core, the following failures appear.
"
$ ./build/bin/run_tests.py -k device
ssssssss....FF........s
======================================================================
FAIL: test_query_device (tests.test_device.DeviceTest.test_query_device)
Test ibv_query_device()
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/ubuntu/rdma-core/tests/test_device.py", line 63, in
test_query_device
self.verify_device_attr(attr, dev)
File "/home/ubuntu/rdma-core/tests/test_device.py", line 200, in
verify_device_attr
assert attr.sys_image_guid != 0
^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError
======================================================================
FAIL: test_query_device_ex (tests.test_device.DeviceTest.test_query_device_ex)
Test ibv_query_device_ex()
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/ubuntu/rdma-core/tests/test_device.py", line 222, in
test_query_device_ex
self.verify_device_attr(attr_ex.orig_attr, dev)
File "/home/ubuntu/rdma-core/tests/test_device.py", line 200, in
verify_device_attr
assert attr.sys_image_guid != 0
^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError
"
The root cause is: before a net device is set with rxe, this net device
is used to generate a sys_image_guid.
Fixes: 2ac5415022d1 ("RDMA/rxe: Remove the direct link to net_device")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
---
drivers/infiniband/sw/rxe/rxe.c | 25 ++++++-------------------
1 file changed, 6 insertions(+), 19 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index 1ba4a0c8726a..e27478fe9456 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -38,10 +38,8 @@ void rxe_dealloc(struct ib_device *ib_dev)
}
/* initialize rxe device parameters */
-static void rxe_init_device_param(struct rxe_dev *rxe)
+static void rxe_init_device_param(struct rxe_dev *rxe, struct net_device *ndev)
{
- struct net_device *ndev;
-
rxe->max_inline_data = RXE_MAX_INLINE_DATA;
rxe->attr.vendor_id = RXE_VENDOR_ID;
@@ -74,15 +72,9 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
rxe->attr.max_pkeys = RXE_MAX_PKEYS;
rxe->attr.local_ca_ack_delay = RXE_LOCAL_CA_ACK_DELAY;
- ndev = rxe_ib_device_get_netdev(&rxe->ib_dev);
- if (!ndev)
- return;
-
addrconf_addr_eui48((unsigned char *)&rxe->attr.sys_image_guid,
ndev->dev_addr);
- dev_put(ndev);
-
rxe->max_ucontext = RXE_MAX_UCONTEXT;
}
@@ -115,18 +107,13 @@ static void rxe_init_port_param(struct rxe_port *port)
/* initialize port state, note IB convention that HCA ports are always
* numbered from 1
*/
-static void rxe_init_ports(struct rxe_dev *rxe)
+static void rxe_init_ports(struct rxe_dev *rxe, struct net_device *ndev)
{
struct rxe_port *port = &rxe->port;
- struct net_device *ndev;
rxe_init_port_param(port);
- ndev = rxe_ib_device_get_netdev(&rxe->ib_dev);
- if (!ndev)
- return;
addrconf_addr_eui48((unsigned char *)&port->port_guid,
ndev->dev_addr);
- dev_put(ndev);
spin_lock_init(&port->port_lock);
}
@@ -144,12 +131,12 @@ static void rxe_init_pools(struct rxe_dev *rxe)
}
/* initialize rxe device state */
-static void rxe_init(struct rxe_dev *rxe)
+static void rxe_init(struct rxe_dev *rxe, struct net_device *ndev)
{
/* init default device parameters */
- rxe_init_device_param(rxe);
+ rxe_init_device_param(rxe, ndev);
- rxe_init_ports(rxe);
+ rxe_init_ports(rxe, ndev);
rxe_init_pools(rxe);
/* init pending mmap list */
@@ -184,7 +171,7 @@ void rxe_set_mtu(struct rxe_dev *rxe, unsigned int ndev_mtu)
int rxe_add(struct rxe_dev *rxe, unsigned int mtu, const char *ibdev_name,
struct net_device *ndev)
{
- rxe_init(rxe);
+ rxe_init(rxe, ndev);
rxe_set_mtu(rxe, mtu);
return rxe_register_device(rxe, ibdev_name, ndev);
--
2.34.1
next reply other threads:[~2025-03-02 21:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-02 21:54 Zhu Yanjun [this message]
2025-03-03 4:21 ` [PATCH rdma-rc 1/1] RDMA/rxe: Fix the failure of ibv_query_device() and ibv_query_device_ex() tests Daisuke Matsuda (Fujitsu)
2025-03-03 7:27 ` Zhu Yanjun
2025-03-03 19:07 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250302215444.3742072-1-yanjun.zhu@linux.dev \
--to=yanjun.zhu@linux.dev \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox