From: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
To: donald.hunter@gmail.com, kuba@kernel.org, davem@davemloft.net,
edumazet@google.com, pabeni@redhat.com, horms@kernel.org,
vadim.fedorenko@linux.dev, jiri@resnulli.us,
anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
andrew+netdev@lunn.ch, aleksandr.loktionov@intel.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
intel-wired-lan@lists.osuosl.org, linux-rdma@vger.kernel.org,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Milena Olech <milena.olech@intel.com>
Subject: [PATCH net-next v1 1/3] dpll: add reference-sync netlink attribute
Date: Tue, 15 Apr 2025 19:51:13 +0200 [thread overview]
Message-ID: <20250415175115.1066641-2-arkadiusz.kubalewski@intel.com> (raw)
In-Reply-To: <20250415175115.1066641-1-arkadiusz.kubalewski@intel.com>
Add new netlink attribute to allow user space configuration of reference
sync pin pairs, where both pins are used to provide one clock signal
consisting of both: base frequency and sync signal.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
---
Documentation/netlink/specs/dpll.yaml | 19 +++++++++++++++++++
drivers/dpll/dpll_nl.c | 10 ++++++++--
drivers/dpll/dpll_nl.h | 1 +
include/uapi/linux/dpll.h | 1 +
4 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml
index 8feefeae5376..333b4596b36f 100644
--- a/Documentation/netlink/specs/dpll.yaml
+++ b/Documentation/netlink/specs/dpll.yaml
@@ -406,6 +406,15 @@ attribute-sets:
doc: |
A ratio of high to low state of a SYNC signal pulse embedded
into base clock frequency. Value is in percents.
+ -
+ name: reference-sync
+ type: nest
+ multi-attr: true
+ nested-attributes: reference-sync
+ doc: |
+ Capable pin provides list of pins that can be bound to create a
+ reference-sync pin pair.
+
-
name: pin-parent-device
subset-of: pin
@@ -436,6 +445,14 @@ attribute-sets:
name: frequency-min
-
name: frequency-max
+ -
+ name: reference-sync
+ subset-of: pin
+ attributes:
+ -
+ name: id
+ -
+ name: state
operations:
enum-name: dpll_cmd
@@ -574,6 +591,7 @@ operations:
- esync-frequency
- esync-frequency-supported
- esync-pulse
+ - reference-sync
dump:
request:
@@ -601,6 +619,7 @@ operations:
- parent-pin
- phase-adjust
- esync-frequency
+ - reference-sync
-
name: pin-create-ntf
doc: Notification about pin appearing
diff --git a/drivers/dpll/dpll_nl.c b/drivers/dpll/dpll_nl.c
index fe9b6893d261..d709a8dc304f 100644
--- a/drivers/dpll/dpll_nl.c
+++ b/drivers/dpll/dpll_nl.c
@@ -24,6 +24,11 @@ const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1] = {
[DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
};
+const struct nla_policy dpll_reference_sync_nl_policy[DPLL_A_PIN_STATE + 1] = {
+ [DPLL_A_PIN_ID] = { .type = NLA_U32, },
+ [DPLL_A_PIN_STATE] = NLA_POLICY_RANGE(NLA_U32, 1, 3),
+};
+
/* DPLL_CMD_DEVICE_ID_GET - do */
static const struct nla_policy dpll_device_id_get_nl_policy[DPLL_A_TYPE + 1] = {
[DPLL_A_MODULE_NAME] = { .type = NLA_NUL_STRING, },
@@ -62,7 +67,7 @@ static const struct nla_policy dpll_pin_get_dump_nl_policy[DPLL_A_PIN_ID + 1] =
};
/* DPLL_CMD_PIN_SET - do */
-static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_ESYNC_FREQUENCY + 1] = {
+static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_REFERENCE_SYNC + 1] = {
[DPLL_A_PIN_ID] = { .type = NLA_U32, },
[DPLL_A_PIN_FREQUENCY] = { .type = NLA_U64, },
[DPLL_A_PIN_DIRECTION] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
@@ -72,6 +77,7 @@ static const struct nla_policy dpll_pin_set_nl_policy[DPLL_A_PIN_ESYNC_FREQUENCY
[DPLL_A_PIN_PARENT_PIN] = NLA_POLICY_NESTED(dpll_pin_parent_pin_nl_policy),
[DPLL_A_PIN_PHASE_ADJUST] = { .type = NLA_S32, },
[DPLL_A_PIN_ESYNC_FREQUENCY] = { .type = NLA_U64, },
+ [DPLL_A_PIN_REFERENCE_SYNC] = NLA_POLICY_NESTED(dpll_reference_sync_nl_policy),
};
/* Ops table for dpll */
@@ -139,7 +145,7 @@ static const struct genl_split_ops dpll_nl_ops[] = {
.doit = dpll_nl_pin_set_doit,
.post_doit = dpll_pin_post_doit,
.policy = dpll_pin_set_nl_policy,
- .maxattr = DPLL_A_PIN_ESYNC_FREQUENCY,
+ .maxattr = DPLL_A_PIN_REFERENCE_SYNC,
.flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
},
};
diff --git a/drivers/dpll/dpll_nl.h b/drivers/dpll/dpll_nl.h
index f491262bee4f..3da10cfe9a6e 100644
--- a/drivers/dpll/dpll_nl.h
+++ b/drivers/dpll/dpll_nl.h
@@ -14,6 +14,7 @@
/* Common nested types */
extern const struct nla_policy dpll_pin_parent_device_nl_policy[DPLL_A_PIN_PHASE_OFFSET + 1];
extern const struct nla_policy dpll_pin_parent_pin_nl_policy[DPLL_A_PIN_STATE + 1];
+extern const struct nla_policy dpll_reference_sync_nl_policy[DPLL_A_PIN_STATE + 1];
int dpll_lock_doit(const struct genl_split_ops *ops, struct sk_buff *skb,
struct genl_info *info);
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
index bf97d4b6d51f..f6cb6209566c 100644
--- a/include/uapi/linux/dpll.h
+++ b/include/uapi/linux/dpll.h
@@ -237,6 +237,7 @@ enum dpll_a_pin {
DPLL_A_PIN_ESYNC_FREQUENCY,
DPLL_A_PIN_ESYNC_FREQUENCY_SUPPORTED,
DPLL_A_PIN_ESYNC_PULSE,
+ DPLL_A_PIN_REFERENCE_SYNC,
__DPLL_A_PIN_MAX,
DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
--
2.38.1
next prev parent reply other threads:[~2025-04-15 17:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-15 17:51 [PATCH net-next v1 0/3] dpll: add ref-sync pins feature Arkadiusz Kubalewski
2025-04-15 17:51 ` Arkadiusz Kubalewski [this message]
2025-04-15 17:51 ` [PATCH net-next v1 2/3] dpll: add reference sync get/set Arkadiusz Kubalewski
2025-04-21 13:22 ` Simon Horman
2025-05-09 12:54 ` Kubalewski, Arkadiusz
2025-04-15 17:51 ` [PATCH net-next v1 3/3] ice: add ref-sync dpll pins Arkadiusz Kubalewski
2025-04-16 8:12 ` [PATCH net-next v1 0/3] dpll: add ref-sync pins feature Jiri Pirko
2025-04-16 13:01 ` Kubalewski, Arkadiusz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250415175115.1066641-2-arkadiusz.kubalewski@intel.com \
--to=arkadiusz.kubalewski@intel.com \
--cc=aleksandr.loktionov@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=milena.olech@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox