From: cel@kernel.org
To: NeilBrown <neil@brown.name>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: <linux-nfs@vger.kernel.org>, <linux-rdma@vger.kernel.org>,
Chuck Lever <chuck.lever@oracle.com>,
Christoph Hellwig <hch@lst.de>
Subject: [PATCH v5 17/19] NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
Date: Fri, 9 May 2025 15:03:51 -0400 [thread overview]
Message-ID: <20250509190354.5393-18-cel@kernel.org> (raw)
In-Reply-To: <20250509190354.5393-1-cel@kernel.org>
From: Chuck Lever <chuck.lever@oracle.com>
The 8192-byte maximum is a protocol-defined limit, and we already
have a symbolic constant defined whose name matches the name of
the limit defined in the protocol. Replace the duplicate.
No change in behavior is expected.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
fs/nfsd/nfsd.h | 2 --
fs/nfsd/nfsproc.c | 4 ++--
fs/nfsd/nfsxdr.c | 4 ++--
3 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index b9ac81023c13..6428a431d765 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -47,8 +47,6 @@ bool nfsd_support_version(int vers);
* Maximum blocksizes supported by daemon under various circumstances.
*/
#define NFSSVC_MAXBLKSIZE RPCSVC_MAXPAYLOAD
-/* NFSv2 is limited by the protocol specification, see RFC 1094 */
-#define NFSSVC_MAXBLKSIZE_V2 (8*1024)
struct readdir_cd {
__be32 err; /* 0, nfserr, or nfserr_eof */
diff --git a/fs/nfsd/nfsproc.c b/fs/nfsd/nfsproc.c
index 65cbe04184f3..11fc9a1d5d80 100644
--- a/fs/nfsd/nfsproc.c
+++ b/fs/nfsd/nfsproc.c
@@ -212,7 +212,7 @@ nfsd_proc_read(struct svc_rqst *rqstp)
SVCFH_fmt(&argp->fh),
argp->count, argp->offset);
- argp->count = min_t(u32, argp->count, NFSSVC_MAXBLKSIZE_V2);
+ argp->count = min_t(u32, argp->count, NFS_MAXDATA);
argp->count = min_t(u32, argp->count, rqstp->rq_res.buflen);
resp->pages = rqstp->rq_next_page;
@@ -707,7 +707,7 @@ static const struct svc_procedure nfsd_procedures2[18] = {
.pc_argzero = sizeof(struct nfsd_readargs),
.pc_ressize = sizeof(struct nfsd_readres),
.pc_cachetype = RC_NOCACHE,
- .pc_xdrressize = ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4,
+ .pc_xdrressize = ST+AT+1+NFS_MAXDATA/4,
.pc_name = "READ",
},
[NFSPROC_WRITECACHE] = {
diff --git a/fs/nfsd/nfsxdr.c b/fs/nfsd/nfsxdr.c
index 5777f40c7353..fc262ceafca9 100644
--- a/fs/nfsd/nfsxdr.c
+++ b/fs/nfsd/nfsxdr.c
@@ -336,7 +336,7 @@ nfssvc_decode_writeargs(struct svc_rqst *rqstp, struct xdr_stream *xdr)
/* opaque data */
if (xdr_stream_decode_u32(xdr, &args->len) < 0)
return false;
- if (args->len > NFSSVC_MAXBLKSIZE_V2)
+ if (args->len > NFS_MAXDATA)
return false;
return xdr_stream_subsegment(xdr, &args->payload, args->len);
@@ -540,7 +540,7 @@ nfssvc_encode_statfsres(struct svc_rqst *rqstp, struct xdr_stream *xdr)
p = xdr_reserve_space(xdr, XDR_UNIT * 5);
if (!p)
return false;
- *p++ = cpu_to_be32(NFSSVC_MAXBLKSIZE_V2);
+ *p++ = cpu_to_be32(NFS_MAXDATA);
*p++ = cpu_to_be32(stat->f_bsize);
*p++ = cpu_to_be32(stat->f_blocks);
*p++ = cpu_to_be32(stat->f_bfree);
--
2.49.0
next prev parent reply other threads:[~2025-05-09 19:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-09 19:03 [PATCH v5 00/19] Allocate payload arrays dynamically cel
2025-05-09 19:03 ` [PATCH v5 01/19] svcrdma: Reduce the number of rdma_rw contexts per-QP cel
2025-05-13 12:00 ` Jeff Layton
2025-05-09 19:03 ` [PATCH v5 02/19] sunrpc: Add a helper to derive maxpages from sv_max_mesg cel
2025-05-09 19:03 ` [PATCH v5 03/19] sunrpc: Remove backchannel check in svc_init_buffer() cel
2025-05-09 19:03 ` [PATCH v5 04/19] sunrpc: Replace the rq_pages array with dynamically-allocated memory cel
2025-05-09 19:03 ` [PATCH v5 05/19] sunrpc: Replace the rq_bvec " cel
2025-05-09 19:03 ` [PATCH v5 06/19] NFSD: Use rqstp->rq_bvec in nfsd_iter_read() cel
2025-05-09 19:03 ` [PATCH v5 07/19] NFSD: De-duplicate the svc_fill_write_vector() call sites cel
2025-05-13 12:02 ` Jeff Layton
2025-05-09 19:03 ` [PATCH v5 08/19] SUNRPC: Export xdr_buf_to_bvec() cel
2025-05-09 19:03 ` [PATCH v5 09/19] NFSD: Use rqstp->rq_bvec in nfsd_iter_write() cel
2025-05-09 19:03 ` [PATCH v5 10/19] SUNRPC: Remove svc_fill_write_vector() cel
2025-05-09 19:03 ` [PATCH v5 11/19] SUNRPC: Remove svc_rqst :: rq_vec cel
2025-05-09 19:03 ` [PATCH v5 12/19] sunrpc: Adjust size of socket's receive page array dynamically cel
2025-05-09 19:03 ` [PATCH v5 13/19] svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages cel
2025-05-09 19:03 ` [PATCH v5 14/19] svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages cel
2025-05-09 19:03 ` [PATCH v5 15/19] sunrpc: Remove the RPCSVC_MAXPAGES macro cel
2025-05-09 19:03 ` [PATCH v5 16/19] NFSD: Remove NFSD_BUFSIZE cel
2025-05-09 19:03 ` cel [this message]
2025-05-09 19:03 ` [PATCH v5 18/19] NFSD: Add a "default" block size cel
2025-05-09 19:03 ` [PATCH v5 19/19] SUNRPC: Bump the maximum payload size for the server cel
2025-05-12 16:44 ` Aurélien Couderc
2025-05-12 18:09 ` Chuck Lever
2025-05-13 8:42 ` Aurélien Couderc
2025-05-13 12:08 ` Chuck Lever
2025-05-14 0:11 ` NeilBrown
2025-05-13 12:05 ` [PATCH v5 00/19] Allocate payload arrays dynamically Jeff Layton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250509190354.5393-18-cel@kernel.org \
--to=cel@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=hch@lst.de \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=neil@brown.name \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox