From: Chuck Lever <cel@kernel.org>
To: NeilBrown <neilb@ownmail.net>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
Leon Romanovsky <leon@kernel.org>, Christoph Hellwig <hch@lst.de>
Cc: <linux-nfs@vger.kernel.org>, <linux-rdma@vger.kernel.org>,
Chuck Lever <chuck.lever@oracle.com>,
Christoph Hellwig <hch@infradead.org>
Subject: [PATCH v2 2/2] svcrdma: Use contiguous pages for RDMA Read sink buffers
Date: Thu, 12 Mar 2026 09:40:08 -0400 [thread overview]
Message-ID: <20260312134008.7387-3-cel@kernel.org> (raw)
In-Reply-To: <20260312134008.7387-1-cel@kernel.org>
From: Chuck Lever <chuck.lever@oracle.com>
svc_rdma_build_read_segment() constructs RDMA Read sink
buffers by consuming pages one-at-a-time from rq_pages[]
and building one bvec per page. A 64KB NFS READ payload
produces 16 separate bvecs, 16 DMA mappings, and
potentially multiple RDMA Read WRs.
A single higher-order allocation followed by split_page()
yields physically contiguous memory while preserving
per-page refcounts. A single bvec spanning the contiguous
range causes rdma_rw_ctx_init_bvec() to take the
rdma_rw_init_single_wr_bvec() fast path: one DMA mapping,
one SGE, one WR.
The split sub-pages replace the original rq_pages[] entries,
so all downstream page tracking, completion handling, and
xdr_buf assembly remain unchanged.
Allocation uses __GFP_NORETRY | __GFP_NOWARN and falls back
through decreasing orders. If even order-1 fails, the
existing per-page path handles the segment.
When nr_pages is not a power of two, get_order() rounds up
and the allocation yields more pages than needed. The extra
split pages replace existing rq_pages[] entries (freed via
put_page() first), so there is no net increase in per-
request page consumption. Successive segments reuse the
same padding slots, preventing accumulation. The
rq_maxpages guard rejects any allocation that would
overrun the array, falling back to the per-page path.
Under memory pressure, __GFP_NORETRY causes the higher-
order allocation to fail without stalling.
The contiguous path is attempted when the segment starts
page-aligned (rc_pageoff == 0) and spans at least two
pages. NFS WRITE segments carry application-modified byte
ranges of arbitrary length, so the optimization is not
restricted to power-of-two page counts.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/xprtrdma/svc_rdma_rw.c | 220 ++++++++++++++++++++++++++++++
1 file changed, 220 insertions(+)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c b/net/sunrpc/xprtrdma/svc_rdma_rw.c
index 4ec2f9ae06aa..63fcf677c96c 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -732,6 +732,216 @@ int svc_rdma_prepare_reply_chunk(struct svcxprt_rdma *rdma,
return xdr->len;
}
+#if PAGE_SIZE < SZ_64K
+
+/*
+ * Limit contiguous RDMA Read sink allocations to 64KB
+ * (order-4 on 4KB-page systems). Higher orders risk
+ * allocation failure under __GFP_NORETRY, which would
+ * negate the benefit of the contiguous fast path.
+ */
+#define SVC_RDMA_CONTIG_MAX_ORDER get_order(SZ_64K)
+
+/**
+ * svc_rdma_alloc_read_pages - Allocate physically contiguous pages
+ * @nr_pages: number of pages needed
+ * @order: on success, set to the allocation order
+ *
+ * Attempts a higher-order allocation, falling back to smaller orders.
+ * The returned pages are split immediately so each sub-page has its
+ * own refcount and can be freed independently.
+ *
+ * Returns a pointer to the first page on success, or NULL if even
+ * order-1 allocation fails.
+ */
+static struct page *
+svc_rdma_alloc_read_pages(unsigned int nr_pages, unsigned int *order)
+{
+ unsigned int o;
+ struct page *page;
+
+ o = get_order(nr_pages << PAGE_SHIFT);
+ if (o > SVC_RDMA_CONTIG_MAX_ORDER)
+ o = SVC_RDMA_CONTIG_MAX_ORDER;
+
+ while (o >= 1) {
+ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN,
+ o);
+ if (page) {
+ split_page(page, o);
+ *order = o;
+ return page;
+ }
+ o--;
+ }
+ return NULL;
+}
+
+/*
+ * svc_rdma_fill_contig_bvec - Replace rq_pages with a contiguous allocation
+ * @rqstp: RPC transaction context
+ * @head: context for ongoing I/O
+ * @bv: bvec entry to fill
+ * @pages_left: number of data pages remaining in the segment
+ * @len_left: bytes remaining in the segment
+ *
+ * On success, fills @bv with a bvec spanning the contiguous range and
+ * advances rc_curpage/rc_page_count. Returns the byte length covered,
+ * or zero if the allocation failed or would overrun rq_maxpages.
+ */
+static unsigned int
+svc_rdma_fill_contig_bvec(struct svc_rqst *rqstp,
+ struct svc_rdma_recv_ctxt *head,
+ struct bio_vec *bv, unsigned int pages_left,
+ unsigned int len_left)
+{
+ unsigned int order, alloc_nr, chunk_pages, chunk_len, i;
+ struct page *page;
+
+ page = svc_rdma_alloc_read_pages(pages_left, &order);
+ if (!page)
+ return 0;
+ alloc_nr = 1 << order;
+
+ if (head->rc_curpage + alloc_nr > rqstp->rq_maxpages) {
+ for (i = 0; i < alloc_nr; i++)
+ __free_page(page + i);
+ return 0;
+ }
+
+ for (i = 0; i < alloc_nr; i++) {
+ svc_rqst_page_release(rqstp,
+ rqstp->rq_pages[head->rc_curpage + i]);
+ rqstp->rq_pages[head->rc_curpage + i] = page + i;
+ }
+
+ chunk_pages = min(alloc_nr, pages_left);
+ chunk_len = min_t(unsigned int, chunk_pages << PAGE_SHIFT, len_left);
+ bvec_set_page(bv, page, chunk_len, 0);
+ head->rc_page_count += chunk_pages;
+ head->rc_curpage += chunk_pages;
+ return chunk_len;
+}
+
+/*
+ * svc_rdma_fill_page_bvec - Add a single rq_page to the bvec array
+ * @head: context for ongoing I/O
+ * @ctxt: R/W context whose bvec array is being filled
+ * @cur: page to add
+ * @bvec_idx: pointer to current bvec index, not advanced on merge
+ * @len_left: bytes remaining in the segment
+ *
+ * If @cur is physically contiguous with the preceding bvec, it is
+ * merged by extending that bvec's length. Otherwise a new bvec
+ * entry is created. Returns the byte length covered.
+ */
+static unsigned int
+svc_rdma_fill_page_bvec(struct svc_rdma_recv_ctxt *head,
+ struct svc_rdma_rw_ctxt *ctxt, struct page *cur,
+ unsigned int *bvec_idx, unsigned int len_left)
+{
+ unsigned int chunk_len = min_t(unsigned int, PAGE_SIZE, len_left);
+
+ head->rc_page_count++;
+ head->rc_curpage++;
+
+ if (*bvec_idx > 0) {
+ struct bio_vec *prev = &ctxt->rw_bvec[*bvec_idx - 1];
+
+ if (page_to_phys(prev->bv_page) + prev->bv_offset +
+ prev->bv_len == page_to_phys(cur)) {
+ prev->bv_len += chunk_len;
+ return chunk_len;
+ }
+ }
+
+ bvec_set_page(&ctxt->rw_bvec[*bvec_idx], cur, chunk_len, 0);
+ (*bvec_idx)++;
+ return chunk_len;
+}
+
+/**
+ * svc_rdma_build_read_segment_contig - Build RDMA Read WR with contiguous pages
+ * @rqstp: RPC transaction context
+ * @head: context for ongoing I/O
+ * @segment: co-ordinates of remote memory to be read
+ *
+ * Greedily allocates higher-order pages to cover the segment,
+ * building one bvec per contiguous chunk. Each allocation is
+ * split so sub-pages have independent refcounts. When a
+ * higher-order allocation fails, remaining pages are covered
+ * individually, merging adjacent pages into the preceding bvec
+ * when they are physically contiguous. The split sub-pages
+ * replace entries in rq_pages[] so downstream cleanup is
+ * unchanged.
+ *
+ * Returns:
+ * %0: the Read WR was constructed successfully
+ * %-ENOMEM: allocation failed
+ * %-EIO: a DMA mapping error occurred
+ */
+static int svc_rdma_build_read_segment_contig(struct svc_rqst *rqstp,
+ struct svc_rdma_recv_ctxt *head,
+ const struct svc_rdma_segment *segment)
+{
+ struct svcxprt_rdma *rdma = svc_rdma_rqst_rdma(rqstp);
+ struct svc_rdma_chunk_ctxt *cc = &head->rc_cc;
+ unsigned int nr_data_pages, bvec_idx;
+ struct svc_rdma_rw_ctxt *ctxt;
+ unsigned int len_left;
+ int ret;
+
+ nr_data_pages = PAGE_ALIGN(segment->rs_length) >> PAGE_SHIFT;
+ if (head->rc_curpage + nr_data_pages > rqstp->rq_maxpages)
+ return -ENOMEM;
+
+ ctxt = svc_rdma_get_rw_ctxt(rdma, nr_data_pages);
+ if (!ctxt)
+ return -ENOMEM;
+
+ bvec_idx = 0;
+ len_left = segment->rs_length;
+ while (len_left) {
+ unsigned int pages_left = PAGE_ALIGN(len_left) >> PAGE_SHIFT;
+ unsigned int chunk_len = 0;
+
+ if (pages_left >= 2)
+ chunk_len = svc_rdma_fill_contig_bvec(rqstp, head,
+ &ctxt->rw_bvec[bvec_idx],
+ pages_left, len_left);
+ if (chunk_len) {
+ bvec_idx++;
+ } else {
+ struct page *cur =
+ rqstp->rq_pages[head->rc_curpage];
+ chunk_len = svc_rdma_fill_page_bvec(head, ctxt, cur,
+ &bvec_idx,
+ len_left);
+ }
+
+ len_left -= chunk_len;
+ }
+
+ ctxt->rw_nents = bvec_idx;
+
+ head->rc_pageoff = offset_in_page(segment->rs_length);
+ if (head->rc_pageoff)
+ head->rc_curpage--;
+
+ ret = svc_rdma_rw_ctx_init(rdma, ctxt, segment->rs_offset,
+ segment->rs_handle, segment->rs_length,
+ DMA_FROM_DEVICE);
+ if (ret < 0)
+ return -EIO;
+ percpu_counter_inc(&svcrdma_stat_read);
+
+ list_add(&ctxt->rw_list, &cc->cc_rwctxts);
+ cc->cc_sqecount += ret;
+ return 0;
+}
+
+#endif /* PAGE_SIZE < SZ_64K */
+
/**
* svc_rdma_build_read_segment - Build RDMA Read WQEs to pull one RDMA segment
* @rqstp: RPC transaction context
@@ -758,6 +968,16 @@ static int svc_rdma_build_read_segment(struct svc_rqst *rqstp,
if (check_add_overflow(head->rc_pageoff, len, &total))
return -EINVAL;
nr_bvec = PAGE_ALIGN(total) >> PAGE_SHIFT;
+
+#if PAGE_SIZE < SZ_64K
+ if (head->rc_pageoff == 0 && nr_bvec >= 2) {
+ ret = svc_rdma_build_read_segment_contig(rqstp, head,
+ segment);
+ if (ret != -ENOMEM)
+ return ret;
+ }
+#endif
+
ctxt = svc_rdma_get_rw_ctxt(rdma, nr_bvec);
if (!ctxt)
return -ENOMEM;
--
2.52.0
next prev parent reply other threads:[~2026-03-12 13:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-12 13:40 [PATCH v2 0/2] RDMA/rw: Fix MR pool exhaustion in bvec RDMA READ path Chuck Lever
2026-03-12 13:40 ` [PATCH v2 1/2] " Chuck Lever
2026-03-12 13:40 ` Chuck Lever [this message]
2026-03-13 8:51 ` [PATCH v2 2/2] svcrdma: Use contiguous pages for RDMA Read sink buffers kernel test robot
2026-03-13 12:34 ` Chuck Lever
2026-03-13 17:31 ` kernel test robot
2026-03-14 5:06 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260312134008.7387-3-cel@kernel.org \
--to=cel@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=hch@infradead.org \
--cc=hch@lst.de \
--cc=jlayton@kernel.org \
--cc=leon@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=neilb@ownmail.net \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox