From: Long Li <longli@microsoft.com>
To: Long Li <longli@microsoft.com>,
Konstantin Taranov <kotaranov@microsoft.com>,
Jakub Kicinski <kuba@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
Jason Gunthorpe <jgg@ziepe.ca>, Leon Romanovsky <leon@kernel.org>,
Haiyang Zhang <haiyangz@microsoft.com>,
"K . Y . Srinivasan" <kys@microsoft.com>,
Wei Liu <wei.liu@kernel.org>, Dexuan Cui <decui@microsoft.com>,
shradhagupta@linux.microsoft.com, Simon Horman <horms@kernel.org>,
ernis@linux.microsoft.com, stephen@networkplumber.org
Cc: netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2 03/13] net: mana: swap queue sets in mana_set_ringparam
Date: Wed, 12 Aug 2026 22:04:08 -0700 [thread overview]
Message-ID: <20260813050418.2906468-4-longli@microsoft.com> (raw)
In-Reply-To: <20260813050418.2906468-1-longli@microsoft.com>
Convert the ring size path to pre-allocate and swap, for the same reasons
as the channel count path: an allocation failure returns the error with
the running configuration untouched, and the vport is never released.
This drops the fallback on failure. Previously a failed mana_attach() was
retried with the previous values, or the defaults, or the minimums, so a
user who asked for a specific size could end up with a different one with
no indication beyond dmesg. There is nothing to recover from now, so the
error is returned.
Also return early when the requested sizes round to the values already in
use.
Signed-off-by: Long Li <longli@microsoft.com>
---
.../ethernet/microsoft/mana/mana_ethtool.c | 74 +++++++++++++------
1 file changed, 51 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
index b12291555eaeb4fafc305ffe7d9e550ec01952c8..40e9886c87a81c86080e52955a0a685cf0472772 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
@@ -761,19 +761,18 @@ static void mana_get_ringparam(struct net_device *ndev,
ring->tx_max_pending = MAX_TX_BUFFERS_PER_QUEUE;
}
+
static int mana_set_ringparam(struct net_device *ndev,
struct ethtool_ringparam *ring,
struct kernel_ethtool_ringparam *kernel_ring,
struct netlink_ext_ack *extack)
{
struct mana_port_context *apc = netdev_priv(ndev);
+ struct mana_port_context *scratch;
+ struct mana_qset newq, oldq;
u32 new_tx, new_rx;
- u32 old_tx, old_rx;
int err;
- old_tx = apc->tx_queue_size;
- old_rx = apc->rx_queue_size;
-
if (ring->tx_pending < MIN_TX_BUFFERS_PER_QUEUE) {
NL_SET_ERR_MSG_FMT(extack, "tx:%d less than the min:%d", ring->tx_pending,
MIN_TX_BUFFERS_PER_QUEUE);
@@ -791,32 +790,61 @@ static int mana_set_ringparam(struct net_device *ndev,
netdev_info(ndev, "Using nearest power of 2 values for Txq:%d Rxq:%d\n",
new_tx, new_rx);
- /* pre-allocating new buffers to prevent failures in mana_attach() later */
- apc->rx_queue_size = new_rx;
- err = mana_pre_alloc_rxbufs(apc, ndev->mtu, apc->num_queues);
- apc->rx_queue_size = old_rx;
- if (err) {
- netdev_err(ndev, "Insufficient memory for new allocations\n");
- return err;
+ if (new_rx == apc->rx_queue_size && new_tx == apc->tx_queue_size)
+ return 0;
+
+ /* Port is down: no queues to rebuild, just record the new sizes. */
+ if (!apc->port_is_up) {
+ apc->rx_queue_size = new_rx;
+ apc->tx_queue_size = new_tx;
+ return 0;
}
- err = mana_detach(ndev, false);
- if (err) {
- netdev_err(ndev, "mana_detach failed: %d\n", err);
- goto out;
+ /* Block RDMA from acquiring the vport for the duration. The vport
+ * itself is never released, so vport_use_count stays > 0.
+ */
+ mutex_lock(&apc->vport_mutex);
+ if (apc->channel_changing) {
+ mutex_unlock(&apc->vport_mutex);
+ return -EBUSY;
}
+ apc->channel_changing = true;
+ mutex_unlock(&apc->vport_mutex);
- apc->tx_queue_size = new_tx;
- apc->rx_queue_size = new_rx;
+ scratch = mana_qset_scratch_alloc(apc);
+ if (!scratch) {
+ err = -ENOMEM;
+ goto clear_flag;
+ }
- err = mana_attach(ndev);
+ err = mana_alloc_qset(scratch, apc->num_queues, new_rx, new_tx,
+ apc->priv_flags, &newq);
if (err) {
- netdev_err(ndev, "mana_attach failed: %d\n", err);
- apc->tx_queue_size = old_tx;
- apc->rx_queue_size = old_rx;
+ NL_SET_ERR_MSG_FMT(extack, "failed to change ring params: %d",
+ err);
+ goto free_scratch; /* current qset untouched */
}
-out:
- mana_pre_dealloc_rxbufs(apc);
+
+ err = mana_publish_qset(apc, &newq, &oldq);
+ if (err) {
+ NL_SET_ERR_MSG_FMT(extack, "failed to change ring params: %d",
+ err);
+ mana_free_qset(scratch, &newq);
+ goto free_scratch;
+ }
+
+ mana_free_qset(scratch, &oldq);
+
+free_scratch:
+ /* After the caller-side cleanup above, so the EQ pool outlives the
+ * CQs that reference it.
+ */
+ mana_publish_close_if_needed(apc);
+ mana_qset_scratch_free(scratch);
+clear_flag:
+ mutex_lock(&apc->vport_mutex);
+ apc->channel_changing = false;
+ mutex_unlock(&apc->vport_mutex);
return err;
}
--
2.43.0
next prev parent reply other threads:[~2026-08-13 5:05 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 5:04 [PATCH net-next v2 00/13] net: mana: reconfigure by replacing the queue set Long Li
2026-08-13 5:04 ` [PATCH net-next v2 01/13] net: mana: add queue-set allocation and teardown helpers Long Li
2026-08-13 5:04 ` [PATCH net-next v2 02/13] net: mana: swap queue sets in mana_set_channels Long Li
2026-08-13 5:04 ` Long Li [this message]
2026-08-13 5:04 ` [PATCH net-next v2 04/13] net: mana: swap queue sets in mana_set_priv_flags Long Li
2026-08-13 5:04 ` [PATCH net-next v2 05/13] net: mana: swap queue sets in mana_change_mtu Long Li
2026-08-13 5:04 ` [PATCH net-next v2 06/13] net: mana: swap queue sets in mana_xdp_set Long Li
2026-08-13 5:04 ` [PATCH net-next v2 07/13] net: mana: do not bail out of mana_detach on dealloc failure Long Li
2026-08-13 5:04 ` [PATCH net-next v2 08/13] net: mana: keep per-queue statistics in the port context Long Li
2026-08-13 5:04 ` [PATCH net-next v2 09/13] net: mana: share the EQ pool across a queue-set swap Long Li
2026-08-13 5:04 ` [PATCH net-next v2 10/13] net: mana: release EQs left idle by a channel-count reduction Long Li
2026-08-13 5:04 ` [PATCH net-next v2 11/13] net: mana: keep a user-configured RSS table across a queue rebuild Long Li
2026-08-13 5:04 ` [PATCH net-next v2 12/13] net: mana: keep the surviving queues when the channel count is reduced Long Li
2026-08-13 5:04 ` [PATCH net-next v2 13/13] net: mana: keep the existing queues when the channel count is raised Long Li
-- strict thread matches above, loose matches on Subject: below --
2026-08-11 6:34 [PATCH net-next v2 00/13] net: mana: reconfigure by replacing the queue set Long Li
2026-08-11 6:35 ` [PATCH net-next v2 03/13] net: mana: swap queue sets in mana_set_ringparam Long Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813050418.2906468-4-longli@microsoft.com \
--to=longli@microsoft.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=decui@microsoft.com \
--cc=edumazet@google.com \
--cc=ernis@linux.microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=horms@kernel.org \
--cc=jgg@ziepe.ca \
--cc=kotaranov@microsoft.com \
--cc=kuba@kernel.org \
--cc=kys@microsoft.com \
--cc=leon@kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shradhagupta@linux.microsoft.com \
--cc=stephen@networkplumber.org \
--cc=wei.liu@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox