Linux RDMA and InfiniBand development
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Zhiping Zhang <zhipingz@meta.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>, Leon Romanovsky <leon@kernel.org>,
	Michael Guralnik <michaelgur@nvidia.com>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	Christian Konig <christian.koenig@amd.com>,
	Alex Williamson <alex@shazbot.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	kvm@vger.kernel.org, linux-rdma@vger.kernel.org,
	linux-pci@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v13 2/5] PCI/TPH: Add requester/completer type helpers
Date: Tue, 15 Sep 2026 17:23:03 -0500	[thread overview]
Message-ID: <20260915222303.GA877199@bhelgaas> (raw)
In-Reply-To: <20260731211601.3033906-3-zhipingz@meta.com>

On Fri, Jul 31, 2026 at 02:15:49PM -0700, Zhiping Zhang wrote:
> Add pcie_tph_enabled_req_type() so drivers can query the enabled TPH
> requester mode without reaching into pci_dev internals.
> 
> Add pcie_tph_completer_type() so drivers that publish TPH metadata for a
> device acting as a completer can gate on the "TPH Completer Supported"
> field of Device Capabilities 2 (bits 13:12, PCI_EXP_DEVCAP2_TPH_COMP_MASK)
> rather than reusing requester-side state. It applies the same reserved-
> encoding fold as get_rp_completer_type(), inlined, so the reserved 0b10
> value never reaches callers.
> 
> This keeps pci_dev::tph_req_type and the completer-capability decode
> inside the PCI/TPH code and provides !CONFIG_PCIE_TPH stubs for callers.
> 
> Signed-off-by: Zhiping Zhang <zhipingz@meta.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
>  drivers/pci/tph.c       | 44 +++++++++++++++++++++++++++++++++++++++++
>  include/linux/pci-tph.h |  8 ++++++++
>  2 files changed, 52 insertions(+)
> 
> diff --git a/drivers/pci/tph.c b/drivers/pci/tph.c
> index 5cbb381e2a02..d0202ff7a1b2 100644
> --- a/drivers/pci/tph.c
> +++ b/drivers/pci/tph.c
> @@ -223,6 +223,50 @@ static u8 get_rp_completer_type(struct pci_dev *pdev)
>  	return PCI_EXP_DEVCAP2_TPH_COMP_NONE;
>  }
>  
> +/**
> + * pcie_tph_enabled_req_type - Return the device's enabled TPH requester type
> + * @pdev: PCI device to query
> + *
> + * Return: PCI_TPH_REQ_DISABLE, PCI_TPH_REQ_TPH_ONLY or PCI_TPH_REQ_EXT_TPH.
> + */
> +u8 pcie_tph_enabled_req_type(struct pci_dev *pdev)
> +{
> +	return pdev->tph_req_type;
> +}
> +EXPORT_SYMBOL(pcie_tph_enabled_req_type);
> +
> +/**
> + * pcie_tph_completer_type - Return the device's TPH Completer support
> + * @pdev: PCI device to query
> + *
> + * Reads the "TPH Completer Supported" field (bits 13:12) of Device

s/Reads/Read/ to match other doc ("Return ... type" above, "Write tag" below)

> + * Capabilities 2. The reserved 0b10 encoding is folded into
> + * "not supported" so callers only need to compare against the three
> + * defined values.

s/The reserved 0b10 encoding is folded/Fold reserved 0b10 encoding/

> + *
> + * Return: one of %PCI_EXP_DEVCAP2_TPH_COMP_NONE,
> + *         %PCI_EXP_DEVCAP2_TPH_COMP_TPH_ONLY or
> + *         %PCI_EXP_DEVCAP2_TPH_COMP_EXT_TPH.
> + */
> +u8 pcie_tph_completer_type(struct pci_dev *pdev)
> +{
> +	u8 tph_comp;
> +	u32 reg;
> +
> +	if (pcie_capability_read_dword(pdev, PCI_EXP_DEVCAP2, &reg))
> +		return PCI_EXP_DEVCAP2_TPH_COMP_NONE;
> +	if (PCI_POSSIBLE_ERROR(reg))
> +		return PCI_EXP_DEVCAP2_TPH_COMP_NONE;
> +
> +	/* 0b10 is reserved; fold it into "not supported" (see above). */
> +	tph_comp = FIELD_GET(PCI_EXP_DEVCAP2_TPH_COMP_MASK, reg);
> +	if (tph_comp == PCI_EXP_DEVCAP2_TPH_COMP_TPH_ONLY ||
> +	    tph_comp == PCI_EXP_DEVCAP2_TPH_COMP_EXT_TPH)
> +		return tph_comp;
> +	return PCI_EXP_DEVCAP2_TPH_COMP_NONE;
> +}
> +EXPORT_SYMBOL(pcie_tph_completer_type);
> +
>  /* Write tag to ST table - Return 0 if OK, otherwise -errno */
>  static int write_tag_to_st_table(struct pci_dev *pdev, int index, u16 tag)
>  {
> diff --git a/include/linux/pci-tph.h b/include/linux/pci-tph.h
> index be68cd17f2f8..7743af6fe432 100644
> --- a/include/linux/pci-tph.h
> +++ b/include/linux/pci-tph.h
> @@ -9,6 +9,8 @@
>  #ifndef LINUX_PCI_TPH_H
>  #define LINUX_PCI_TPH_H
>  
> +#include <linux/pci_regs.h>
> +
>  /*
>   * According to the ECN for PCI Firmware Spec, Steering Tag can be different
>   * depending on the memory type: Volatile Memory or Persistent Memory. When a
> @@ -30,6 +32,8 @@ void pcie_disable_tph(struct pci_dev *pdev);
>  int pcie_enable_tph(struct pci_dev *pdev, int mode);
>  u16 pcie_tph_get_st_table_size(struct pci_dev *pdev);
>  u32 pcie_tph_get_st_table_loc(struct pci_dev *pdev);
> +u8 pcie_tph_enabled_req_type(struct pci_dev *pdev);
> +u8 pcie_tph_completer_type(struct pci_dev *pdev);
>  #else
>  static inline int pcie_tph_set_st_entry(struct pci_dev *pdev,
>  					unsigned int index, u16 tag)
> @@ -41,6 +45,10 @@ static inline int pcie_tph_get_cpu_st(struct pci_dev *dev,
>  static inline void pcie_disable_tph(struct pci_dev *pdev) { }
>  static inline int pcie_enable_tph(struct pci_dev *pdev, int mode)
>  { return -EINVAL; }
> +static inline u8 pcie_tph_enabled_req_type(struct pci_dev *pdev)
> +{ return PCI_TPH_REQ_DISABLE; }
> +static inline u8 pcie_tph_completer_type(struct pci_dev *pdev)
> +{ return PCI_EXP_DEVCAP2_TPH_COMP_NONE; }
>  #endif
>  
>  #endif /* LINUX_PCI_TPH_H */
> -- 
> 2.53.0-Meta
> 

  parent reply	other threads:[~2026-09-15 22:23 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20260731211601.3033906-1-zhipingz@meta.com>
     [not found] ` <20260731211601.3033906-3-zhipingz@meta.com>
2026-08-03  1:21   ` [PATCH v13 2/5] PCI/TPH: Add requester/completer type helpers fengchengwen
2026-09-15 22:23   ` Bjorn Helgaas [this message]
2026-09-15 23:27     ` Zhiping Zhang
2026-08-14 18:08 ` [PATCH v13 0/5] vfio/dma-buf: add TPH support for peer-to-peer access Zhiping Zhang
2026-09-02 20:53   ` Zhiping Zhang
2026-09-10 21:46     ` [PATCH v13 0/5] vfio/dma-buf: add TPH support for peer-to-peer access - ping Zhiping Zhang
2026-09-11  7:58       ` Christian König
2026-09-14 16:44         ` Zhiping Zhang
2026-09-15 20:49           ` Alex Williamson
2026-09-16  0:17             ` Zhiping Zhang
2026-09-15 11:37         ` Leon Romanovsky
2026-09-15 12:59           ` Christian König
2026-09-15 13:37             ` Leon Romanovsky
     [not found] ` <20260731211601.3033906-6-zhipingz@meta.com>
2026-09-23 19:11   ` [PATCH v13 5/5] RDMA/mlx5: get tph for p2p access when registering dma-buf mr Zhiping Zhang
2026-09-24  1:13   ` fengchengwen
2026-09-24  6:24     ` Zhiping Zhang
2026-09-24 23:30       ` Jason Gunthorpe
2026-09-25  6:17         ` Zhiping Zhang
2026-09-28 17:29           ` Jason Gunthorpe
2026-09-28 21:47             ` Zhiping Zhang
2026-09-30 12:13               ` Leon Romanovsky
2026-10-05 21:33                 ` Zhiping Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260915222303.GA877199@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=alex@shazbot.org \
    --cc=bhelgaas@google.com \
    --cc=christian.koenig@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jgg@ziepe.ca \
    --cc=kvm@vger.kernel.org \
    --cc=leon@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=michaelgur@nvidia.com \
    --cc=sumit.semwal@linaro.org \
    --cc=zhipingz@meta.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox