From: Laurence Oberman <loberman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Bart Van Assche <Bart.VanAssche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: Testing latest linux-next 4.9 ib_srp and ib_srpt
Date: Tue, 20 Dec 2016 14:43:48 -0500 (EST) [thread overview]
Message-ID: <2052479881.8196880.1482263028727.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <1918919536.8196250.1482262406057.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
----- Original Message -----
> From: "Laurence Oberman" <loberman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> To: "Bart Van Assche" <Bart.VanAssche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
> Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Sent: Tuesday, December 20, 2016 2:33:26 PM
> Subject: Re: Testing latest linux-next 4.9 ib_srp and ib_srpt
>
> Hello Bart
>
> I pulled the latest linux-next and built kernels for both server and client
> to rerun all my EDR tests for srp.
>
> For some reason the I/O size is being capped again to 1MB in my testing.
> Using my same testbed.
> Remember we spent a lot of time making sure we could do 4MB I/O :)
>
> Its working fine in the RHEL 7.3 kernel so before I start going back testing
> upstream kernels decided to ask.
>
> Have you tested large I/O with latest linux-next
>
> Server Configuration
> ---------------------
> Linux fedstorage.bos.redhat.com 4.9.0+
>
> [root@fedstorage modprobe.d]# cat ib_srp.conf
> options ib_srp cmd_sg_entries=64 indirect_sg_entries=2048
>
> [root@fedstorage modprobe.d]# cat ib_srpt.conf
> options ib_srpt srp_max_req_size=8296
>
> Also Using
>
> # Set the srp_sq_size
> for i in /sys/kernel/config/target/srpt/0xfe800000000000007cfe900300726e4e
> /sys/kernel/config/target/srpt/0xfe800000000000007cfe900300726e4f
> do
> echo 16384 > $i/tpgt_1/attrib/srp_sq_size
> done
>
> Client Configuration
> --------------------
> Linux ibclient 4.9.0+
>
> [root@ibclient modprobe.d]# cat ib_srp.conf
> options ib_srp cmd_sg_entries=255 indirect_sg_entries=2048
>
> dd if=/dev/sdw bs=4096k of=/dev/null iflag=direct
>
> ### RECORD 4 >>> ibclient <<< (1482261733.001) (Tue Dec 20 14:22:13 2016)
> ###
> # DISK STATISTICS (/sec)
> #
> <---------reads---------------><---------writes--------------><--------averages-------->
> Pct
> #Time Name KBytes Merged IOs Size Wait KBytes Merged IOs Size
> Wait RWSize QLen Wait SvcTim Util
> 14:22:13 sdw 1373184 0 1341 1024 2 0 0 0 0
> 0 1024 3 2 0 97
>
>
> If I reboot into my 7.3 kernel its back to what I expect
>
> dd if=/dev/sdw bs=4096k of=/dev/null iflag=direct
>
>
> ### RECORD 3 >>> ibclient <<< (1482262254.001) (Tue Dec 20 14:30:54 2016)
> ###
> # DISK STATISTICS (/sec)
> #
> <---------reads---------------><---------writes--------------><--------averages-------->
> Pct
> #Time Name KBytes Merged IOs Size Wait KBytes Merged IOs Size
> Wait RWSize QLen Wait SvcTim Util
> 14:30:54 sdw 172032 129 42 4096 3 0 0 0 0
> 0 4096 1 3 3 130
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Hi Bart,
Just FYI
That dd snap was just as I had stopped the dd.
Here is a stable dd snap with the RHEL kernel, I just noticed the merging, need to reboot back into upstream to compare again.
No merging seen in upstream.
Thanks
Laurence
### RECORD 6 >>> ibclient <<< (1482262723.001) (Tue Dec 20 14:38:43 2016) ###
# DISK STATISTICS (/sec)
# <---------reads---------------><---------writes--------------><--------averages--------> Pct
#Time Name KBytes Merged IOs Size Wait KBytes Merged IOs Size Wait RWSize QLen Wait SvcTim Util
14:38:43 sdw 1200128 879 293 4096 3 0 0 0 0 0 4096 1 3 3 95
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-12-20 19:43 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-08 1:10 [PATCH, RFC 0/5] IB: Optimize DMA mapping Bart Van Assche
[not found] ` <07c07529-4636-fafb-2598-7358d8a1460d-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-12-08 1:10 ` [PATCH 1/5] treewide: constify most struct dma_map_ops Bart Van Assche
[not found] ` <f6b70724-772c-c17f-f1be-1681fab31228-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-12-09 18:20 ` Christoph Hellwig
2016-12-08 1:10 ` [PATCH 2/5] misc: vop: Remove a cast Bart Van Assche
[not found] ` <6fff2450-6442-4539-47ff-67f04a593c06-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-12-09 18:20 ` Christoph Hellwig
2016-12-08 1:11 ` [PATCH 3/5] Move dma_ops from archdata into struct device Bart Van Assche
2016-12-09 18:22 ` Christoph Hellwig
2016-12-09 19:13 ` David Woodhouse
2016-12-09 19:46 ` Bart Van Assche
2016-12-08 1:11 ` [PATCH 4/5] IB: Switch from struct ib_dma_mapping_ops to struct dma_mapping_ops Bart Van Assche
[not found] ` <25d066c2-59d7-2be7-dd56-e29e99b43620-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-12-09 18:23 ` Christoph Hellwig
2016-12-09 18:24 ` Christoph Hellwig
[not found] ` <20161209182429.GF16622-jcswGhMUV9g@public.gmane.org>
2016-12-19 16:42 ` Dennis Dalessandro
[not found] ` <52e8398f-a146-721c-3b92-0892b4abbff8-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-12-19 16:55 ` Bart Van Assche
[not found] ` <1482166487.25336.10.camel-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-12-20 19:33 ` Testing latest linux-next 4.9 ib_srp and ib_srpt Laurence Oberman
[not found] ` <1918919536.8196250.1482262406057.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-20 19:43 ` Laurence Oberman [this message]
[not found] ` <2052479881.8196880.1482263028727.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-20 20:44 ` Laurence Oberman
[not found] ` <1668746735.8200653.1482266682585.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-20 21:09 ` Laurence Oberman
2016-12-21 3:31 ` Laurence Oberman
[not found] ` <120559766.8215321.1482291094018.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-21 6:34 ` Laurence Oberman
[not found] ` <1928955380.8220327.1482302041315.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-21 8:08 ` Bart Van Assche
2016-12-22 2:10 ` Laurence Oberman
[not found] ` <1337539588.8422488.1482372617094.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-22 6:23 ` Christoph Hellwig
[not found] ` <20161222062321.GA30326-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2016-12-22 13:17 ` Testing latest linux-next 4.9 ib_srp and ib_srpt sees I/O capped at 1MB and no merging Laurence Oberman
[not found] ` <1661819060.8462293.1482412678092.JavaMail.zimbra-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-22 15:40 ` Christoph Hellwig
2016-12-22 19:54 ` block: add back plugging in __blkdev_direct_IO kbuild test robot
[not found] ` <20161222154049.GA4638-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2016-12-22 17:59 ` Testing latest linux-next 4.9 ib_srp and ib_srpt sees I/O capped at 1MB and no merging Laurence Oberman
2016-12-22 19:55 ` block: add back plugging in __blkdev_direct_IO kbuild test robot
2016-12-08 1:12 ` [PATCH 5/5] treewide: Inline ib_dma_map_*() functions Bart Van Assche
[not found] ` <9bdf696e-ec64-d60e-3d7e-7ad5b3000d60-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-12-09 18:23 ` Christoph Hellwig
2016-12-08 6:48 ` [PATCH, RFC 0/5] IB: Optimize DMA mapping Or Gerlitz
[not found] ` <CAJ3xEMi4HY9Ehp-V4rP5UieAk=GjAu0X4uEnP-yMDomcFDpHkA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-08 16:51 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2052479881.8196880.1482263028727.JavaMail.zimbra@redhat.com \
--to=loberman-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=Bart.VanAssche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).