Re: failed to allocate device WQ

[Holger Kiehl <Holger.Kiehl@dwd.de>]

[-- Attachment #1: Type: text/plain, Size: 1669 bytes --]

On Sat, 21 Dec 2024, Zhu Yanjun wrote:

> 在 2024/12/20 18:10, Holger Kiehl 写道:
> > Hello,
> > 
> > since upgrading from kernel 6.10 to 6.11 (also 6.12) one Infiniband
> > card sometimes hits this error:
> > 
> >     kernel: workqueue: Failed to create a rescuer kthread for wq "ipoib_wq":
> >     kernel: -EINTR
> >     kernel: ib0: failed to allocate device WQ
> >     kernel: mlx5_1: failed to initialize device: ib0 port 1 (ret = -12)
> >     kernel: mlx5_1: couldn't register ipoib port 1; error -12
> > 
> > The system has two cards:
> > 
> >     41:00.0 Infiniband controller: Mellanox Technologies MT28908 Family
> >     [ConnectX-6]
> >     c4:00.0 Infiniband controller: Mellanox Technologies MT28908 Family
> >     [ConnectX-6]
> > 
> > If that happens one cannot use that card for TCP/IP communication. It does
> > not always happen, but when it does it always happens with the second
> > card mlx5_1. Never with mlx5_0. This happens on four different systems.
> > 
> > Any idea what I can do to stop this from happening?
> > 
> > Regards,
> > Holger
> > 
> > PS: Firmware for both cards is 20.41.1000
> 
> It is very possible that FW is not compatible with the driver. IMO, you can
> make tests with Mellanox OFED.
> 
Thanks, I did not know there was another driver.

I just had a look, but since I build my own kernels via 'make
binrpm-pkg' and then distribute them, this seems a to big hurdle to
overcome for me.

> If the driver is compatible with FW, this problem should disappear.
> 
Actually the firmware has always been 20.39.1002 and after the
problems appeared I have upgraded to 20.41.1000, hoping it will
solve the problem.

Regards,
Holger