* ConnectX saquery question
@ 2009-10-14 13:30 Aaron Knister
[not found] ` <eafd71280910140630w2ca6a802s9ef98362d0fecb6-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Aaron Knister @ 2009-10-14 13:30 UTC (permalink / raw)
To: linux-rdma
I searched the lists and can't really find an answer to my question-
When I run saquery -s on my cluster with ConnectX HCAs (fw ver
2.6.648) all I get is the following output
IsSM ports
IsSMdisabled ports
I thought this should show ports that are running a subnet manager
(there are 2 running on the cluster) or am I incorrect?
Thanks!
-Aaron
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ConnectX saquery question
[not found] ` <eafd71280910140630w2ca6a802s9ef98362d0fecb6-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2009-10-14 13:37 ` Hal Rosenstock
[not found] ` <f0e08f230910140637g5049658cy8b3481c06b0865af-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Hal Rosenstock @ 2009-10-14 13:37 UTC (permalink / raw)
To: Aaron Knister; +Cc: linux-rdma
On Wed, Oct 14, 2009 at 9:30 AM, Aaron Knister <aaron.knister-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> I searched the lists and can't really find an answer to my question-
>
> When I run saquery -s on my cluster with ConnectX HCAs (fw ver
> 2.6.648) all I get is the following output
>
> IsSM ports
>
> IsSMdisabled ports
>
> I thought this should show ports that are running a subnet manager
> (there are 2 running on the cluster) or am I incorrect?
That means that the IsSM bit in PortInfo:CapabilityMask is not being
set. Maybe that's not supported by the firmware.
-- Hal
>
> Thanks!
>
> -Aaron
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ConnectX saquery question
[not found] ` <f0e08f230910140637g5049658cy8b3481c06b0865af-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2009-10-14 13:55 ` Yevgeny Kliteynik
[not found] ` <4AD5D854.20506-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Yevgeny Kliteynik @ 2009-10-14 13:55 UTC (permalink / raw)
To: Hal Rosenstock; +Cc: Aaron Knister, linux-rdma
Hal Rosenstock wrote:
> On Wed, Oct 14, 2009 at 9:30 AM, Aaron Knister <aaron.knister-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> I searched the lists and can't really find an answer to my question-
>>
>> When I run saquery -s on my cluster with ConnectX HCAs (fw ver
>> 2.6.648) all I get is the following output
>>
>> IsSM ports
>>
>> IsSMdisabled ports
>>
>> I thought this should show ports that are running a subnet manager
>> (there are 2 running on the cluster) or am I incorrect?
>
> That means that the IsSM bit in PortInfo:CapabilityMask is not being
> set. Maybe that's not supported by the firmware.
Nope, I just checked it with FW 2.6.648 - looks fine:
# saquery -s
IsSM ports
PortInfoRecord dump:
EndPortLid..............512
PortNum.................0x1
base_lid................0x200
master_sm_base_lid......0x80
capability_mask.........0x251086A
PortInfoRecord dump:
EndPortLid..............128
PortNum.................0x1
base_lid................0x80
master_sm_base_lid......0x80
capability_mask.........0x251086A
IsSMdisabled ports
Maybe IsSM bit is not being set by the OSM?
What SM version are you running?
-- Yevgeny
> -- Hal
>
>> Thanks!
>>
>> -Aaron
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ConnectX saquery question
[not found] ` <4AD5D854.20506-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
@ 2009-10-14 14:16 ` Yevgeny Kliteynik
0 siblings, 0 replies; 4+ messages in thread
From: Yevgeny Kliteynik @ 2009-10-14 14:16 UTC (permalink / raw)
To: kliteyn-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb
Cc: Hal Rosenstock, Aaron Knister, linux-rdma
Yevgeny Kliteynik wrote:
> Hal Rosenstock wrote:
>> On Wed, Oct 14, 2009 at 9:30 AM, Aaron Knister
>> <aaron.knister-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>>> I searched the lists and can't really find an answer to my question-
>>>
>>> When I run saquery -s on my cluster with ConnectX HCAs (fw ver
>>> 2.6.648) all I get is the following output
>>>
>>> IsSM ports
>>>
>>> IsSMdisabled ports
>>>
>>> I thought this should show ports that are running a subnet manager
>>> (there are 2 running on the cluster) or am I incorrect?
>>
>> That means that the IsSM bit in PortInfo:CapabilityMask is not being
>> set. Maybe that's not supported by the firmware.
>
> Nope, I just checked it with FW 2.6.648 - looks fine:
>
> # saquery -s
> IsSM ports
> PortInfoRecord dump:
> EndPortLid..............512
> PortNum.................0x1
> base_lid................0x200
> master_sm_base_lid......0x80
> capability_mask.........0x251086A
> PortInfoRecord dump:
> EndPortLid..............128
> PortNum.................0x1
> base_lid................0x80
> master_sm_base_lid......0x80
> capability_mask.........0x251086A
>
> IsSMdisabled ports
>
> Maybe IsSM bit is not being set by the OSM?
> What SM version are you running?
Also, run the following from the node that runs SM and
doesn't appear in the 'saquery -s' report:
sminfo -D 0
smpquery -D portinfo 0 <sm_port_num>
'sm_port_num' is the number of port that SM is binded to.
Usually it's 1.
-- Yevgeny
> -- Yevgeny
>
>
>> -- Hal
>>
>>> Thanks!
>>>
>>> -Aaron
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-10-14 14:16 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-14 13:30 ConnectX saquery question Aaron Knister
[not found] ` <eafd71280910140630w2ca6a802s9ef98362d0fecb6-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-10-14 13:37 ` Hal Rosenstock
[not found] ` <f0e08f230910140637g5049658cy8b3481c06b0865af-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-10-14 13:55 ` Yevgeny Kliteynik
[not found] ` <4AD5D854.20506-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2009-10-14 14:16 ` Yevgeny Kliteynik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox