From mboxrd@z Thu Jan 1 00:00:00 1970 From: Susan Gleeson Subject: srp_daemon stops finding a target Date: Wed, 06 Jan 2010 16:15:19 -0500 Message-ID: <4B44FD67.108@sun.com> Mime-Version: 1.0 Content-Type: text/plain; CHARSET=US-ASCII; format=flowed Content-Transfer-Encoding: 7BIT Return-path: Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rdma@vger.kernel.org I'm at a loss to figure out what's going wrong and hoping you can help. OFED 1.5.rc6, RHEL5.4 initiator, Solaris target Initially, srp_daemon could discover the target and establish a session (we're using run_srp_daemon). Pulled the cable from one of the 2 target ports and all remained well. Rebooted the target system and now the initiator cannot discover that target at all. ibchecknet and ibdiagnet look fine and can see that port 2 on the target system HCA is alive and well. This suggests the fabric side of things is happy. I manually echo-ed the appropriate entry to add_target, and the session was correctly established, which tells me that the target side of things is happy. Which leaves srp_daemon as suspect. Or something else I'm overlooking. What could cause this? Any help appreciated, Sue -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html